Roads And Buildings Department Tender

Periodical Renewals to Bidrelly to Dharmabad road from Km.0/0 to 3/4 in Nirmal Dist (2nd call);Providing and fixing Caution/Warning Sing of 900mm Triangular (TypeXI)Providing and fixing Cautionary/Warning sing boards size 900mm equilateral triangle made out of Type-XI of ASTMD 4956-09 wide angle cube cornered micro prismatic retro reflective sheeting and confirming to IRC 67:2012 for full background of white colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM aluminium composite material sheet having minimum 0.5mm thick aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and white colour with bands of 30cm of height. The sign post shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 concrete foundation of size 450x450x600mm including cost and conveyance of all materials, equipment, machinery and labour with all leads and lift loading charges necessary for satisfactory completion of the work as directed by Engineer-In-Charge.

Periodical Renewals to Bidrelly to Dharmabad road from Km.0/0 to 3/4 in Nirmal Dist (2nd call);Providing & Fixing Junction Boards of 1500x1200mm Rectaangular (Type XI) Providing & fixing junction boards of size 1500x1200mm made out of Type-XI of ASTMD 4956-09 wide angle cube cornered micro prismatic retro retro reflective sheeting prismatic retro reflective sheeting and confirming to IRC 67:2012 for full background of Green colour and white letters and fixed over 4MM alluminum composite material sheet having minimum 0.5mm thick alluminum skin on both sides with back side painted grey colour and fixed over back support frame of M.S. angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and white colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 concrete foundation of size 450x450x600mm including cost and conveyance of all materials equipment machinery and labour with all leads and lift loading charges necessary for satisfactory completion of the work as directed by Engineer-in-Charge.

Periodical Renewals to Bidrelly to Dharmabad road from Km.0/0 to 3/4 in Nirmal Dist (2nd call);Thermo Plastic Paint For Rumble strips-10mm (In 4 Layers each 2.5mm thick)Supplying of hot applied thermoplastic road marking compound, 10mm thick including reflectorising glass beads at 250gms with Reflectorising Glass Beads on bituminous surface at 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass bead as per mORTH section 803.4 and IR:35-2015 the material should satisfy the requirements as per MORTH specifications 803.4 and must comply with the following a) white index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab. In case th department approved the white index of any vendor, the department engineer may carryout random checking of the applied products at site against the approved panel. In case of any major deviation beyind acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will complee the vendor back to replace the full consignment by the department.