Roads And Buildings Department Tender

civil work;Supply of 20mm PPR Ball Valve conforming to DIN Standards 8077/8092 TBSP-J.III-184

civil work;S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter turn spindle internal / external threaded connection conforming to IS 8931

civil work;S & F 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931

civil work;Supply & fixing of PVC low level system with internal components & short bend: 10 Litres capacity Single Flush

civil work;Supplying & fixing approved make Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-2004 with "P" or "S" trap: 630 mm Long

civil work;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock TBSP-E.VI-04

civil work;Carting of debris including the excavated earth with the 16 KM lead away from the Muncipal limits.

civil work;Flooring with non-skid ceramic tiles of size 300 x 300 mm not less than 7.3 mm thick set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed)cost of excluding seigniorage on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No.707 & 701)

civil work;Brick masonry in CM 1:8 prop. using second class non modular bricks from approved source having minimum crushing strength of not less than 3.3 Kg/Sqcm. including cost and conveyance of all materials and water to work site, seigniorage and all operational, incidental, labour charges such as scaffolding, mixing mortar, constructing masonry, lift charges, curing, etc., complete for finished item of work.

civil work;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding Windows with mesh shutter provision ? (only 2-glass shutters) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (80 mm x 52 mm)/ (94 mm x 45 mm) x 2.20 mm for outer frames, (54 mm x 38 mm)/(39 mm x 58 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be coextruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work TBSC-M.II-10

civil work;Supply and fixing box type cupboard glazed on top and three double shutter at bottom using 19 mm BWR grade ply covered with 1.50 mm thick matt finish laminate on exposed sides, 150 mm SS handles , 100 mm SS zero crank hinges etc, including fixing the fixtures with required no. of screws, bolts, beading and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractor profit etc., complete for finished item of work.

civil work;Manufacturing and Providing Box type cupboard made of 19mm thick BWR grade ply wood at top, bottom and sides and 12mm thickBWR grade ply wood at back of the cupboards and laminated with 1.5mm thick laminate sheet and providing the necessary hard wares such as 3 Nos handles 6" length, and O rings hinges 3 Nos including cost and conveyance of all material and labour charges and all taxes etc complete.( Measurement will be surface area)

civil work;Supply and fixing frame shutter cupboard (three row two double shutter one single shutter) using 19 mm BWR grade ply covered with 1 mm thick matt finish laminate on exposed sides, 150 mm SS handles , 100 mm SS zero crank hinges etc, including fixing the fixtures with required no. of screws, bolts, beading and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractor profit etc., complete for finished item of work.

civil work;Supply and fixing frame shutter (two double shutter, one single shutter)cupboard using 19 mm BWR grade ply covered with 1 mm thick matt finish laminate on all exposed sides, 150 mm SS handles , 100 mm SS zero crank hinges etc, including fixing the fixtures with required no. of screws, bolts, beading and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractor profit etc., complete for finished item of work.

civil work;Supply and fixing frame shutter cupboard (three double shutter)using 19 mm BWR grade ply covered with 1 mm thick matt finish laminate on exposed sides, 150 mm SS handles , 100 mm SS zero crank hinges etc, including fixing the fixtures with required no. of screws, bolts, beading and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractor profit etc., complete for finished item of work.