Roads And Buildings Department Tender

AM work;CRS masonry 2nd sort in CM (1:6) prop by using HBG stones including cost and conveyance of all materials and labour charges,all leads and lifts, curing and all other T&P charges etc.,complete.

AM work;Providing Rubmbe strips in 6 transverse bar with Hot applid themo-plastic compound with 5mm/7.5mm/15mm thick in multiple layers of 2.5 mm thick each and 200mm /300mm width including reflectorising glass beads @ 250gms kper sqm for top layer on bituminious surface and top layer thickness of 2.5mm is exclusive of surface applied glass bead as per IrC:35 the mterial should be of Berger Company/BERGER Equivalent and must comly with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 numers must be submitted for checking up the white index in the department lab. In case the department aproves the white index of any vendor, the department engineer may carryout random checing of the applied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignnment of the said material and will compell the vendor has to replace the full consignmnet by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department) b) Luminance factor of the material should be in the range of 80-85% at 45 degreee centigrade as per AASTHOM 249 c) Crack resistance: The appied panel cured for 7days under ambient condition and then should be tested as per BS3262, Part-1, 1989 and should pass at the range of '0' degree centigrade to '-10' degree centigrade d) Adhesion: Strong E) Softening point : 102 degree centigrade f) Dried film finish : Smooth and uniform G) Night Vision: High as directedby the Engineer-in-Charge and confirming to IS: 164-1961 Rumble stirip with Thermoplastic paint 15mm thick laid in six layers.)

AM work;Providing, Laying,Sprading and compacting graded HBG crushed stone aggregat to Wet Mix Macadam specification including cost, (excluding seigniorage) of all materials and including prmixing themateirial with water at OMC in Machanical mix Plant carriage of mixed matrrial by tipper to site, laying in uniform layers with paver in base courses on wll prepared surface and compacting with vibratory roller to achieve the deisred density etc, as direted by the Engineer-in-Charge; and as per MoRT&H specification 406 (5th revision) for finihsed item of work (Payment will be made based on levels for finished item of work) (Broken edes, potholes and road cutings)