Roads And Buildings Department Tender

EI;Supply and run of 25mmX6mm GI strip including cost of all accessories and labour charges etc complete.

EI;Supply and run of 50mmX6mm GI strip including cost of all accessories and labour charges etc complete.

EI;Supply and run of 50mmX6mm copper strip including cost of all accessories and labour charges etc complete.

EI;"Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted out door KIOSK of double door type made out of No.14 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN with suitable bus bars (with rating of 0.8A/ Sqmm) . The panel shall be mounting on U channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materialswith angle iron stand etc & labour charges. Supply of 6A 10KA FP MCB, C/D Curve ISI Mark-1 No Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree.Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. Supply of 630A 4 Pole MCCB / Confirms to IS/IEC 60947-2 having Breaking Capacity 50 KA with thermal magnetic release Panel Mounted.Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. 1No Erection of Panel board with C.C bed on suitable angle iron base frame etc., complete.

EI;Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted 100KVAR APFC panel made out of No.16 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN Alluminium busbar ( with rating of 0.8A/ Sqmm) supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves.The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below. This shall be got be manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing the same and painting with powder coating including internal connections cost and conveyance of all materials & labour charges. 250A Alluminium Bus Bar with colour coded sleeves.(1.2A/Sqmm).Internal wiring with approved make cable Earthing Flat: Providing suitable G.I Flat INCOMER Supply of 250A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted - 1 No Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. Metering Set:Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS.Supply and erection of 0-250A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No Makes : L&T / C&S / SALZAR / HPL MAKE.Supply and erection of LED indication lamps on the existing panel board. - 3Nos Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of LT current transformer with bar primary 250 / 5A ratio in the existing panel including connections etc., complete. - 3Nos. MAKE : KAPPA 32A Bakelite fuse units with HRC fuse links (A.R.) - 3Nos Supply and fixing of 8 Stage APFC Relay with connections suitable CTs sensing from main bus bar of main panel. - 1No Makes : L&T / Siemens / EPCOS / Schneider / Elmeasure.

EI;Supply of 6A 10KA FP MCB, C/D Curve ISI Mark-1 No Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. OUT GOING: Supply of 63A 10KA TP MCB, C/D Curve ISI Mark.- 3 Nos Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree.Supply of 6-32A 10KA TP MCB, C/D Curve ISI Mark. - 5Nos Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree.Supply and fixing of 20 KVAR Rating capacitor duty contactor - 3 Nos Makes:L&T/Siemens/Schneider/Epcos. Supply and fixing of 10 KVAR Rating capacitor duty contactor - 3 Nos Makes:L&T/Siemens/Schneider/Epcos.Supply and fixing of 5 KVAR Rating capacitor duty contactor - 2 Nos Makes:L&T/Siemens/Schneider/Epcos.Labour charges etc complete with connections for finished item of work.20 KVAR capacitor - 3Nos Makes:L&T/Siemens/Schneider/Epcos.10 KVAR capacitor - 3Nos Makes:L&T/Siemens/Schneider/Epcos 5 KVAR capacitor - 2Nos Makes:L&T/Siemens/Schneider/Epcos.Control wiring,Labour charges for errection of switch gears,panels boards including all labour charges etc with connections for finished items of works including transportation charges @ 5%

EI;Supply of 185 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Torrent / Unicab / Universal / Polycab / Havells

EI;Supply of 95 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Torrent / Unicab / Universal / Polycab / Havells

EI;Supply of 70 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Torrent / Unicab / Universal / Polycab / HavellsMakes : Torrent / Unicab / Universal / Polycab / Havells

EI;Supply and Fixing of double compression brass cable glands for 3.5 core 95 Sqmm XLPE armoured cable with brass washers etc., complete. Makes: SMI / Commet / Dowels.

EI;Supply and Fixing of double compression brass cable glands for 3.5 core 70 Sqmm XLPE armoured cable with brass washers etc., complete. Makes: SMI / Commet / Dowels.

EI;Supply and Fixing of crimping type alluminium lugs confirming to IS specifications for cables of 185 Sqmm including nuts and bolts with conections etc., complete. Makes: DMI / Jainson / Dowels

EI;Supply and Fixing of crimping type alluminium lugs confirming to IS specifications for cables of 95Sqmm including nuts and bolts with conections etc., complete. Makes: DMI / Jainson / Dowels

EI;Supply and Fixing of crimping type alluminium lugs confirming to IS specifications for cables of 70 Sqmm including nuts and bolts with conections etc., complete. Makes: DMI / Jainson / Dowels

EI;Supply and Fixing of crimping type alluminium lugs confirming to IS specifications for cables of 35 Sqmm including nuts and bolts with conections etc., complete. Makes: DMI / Jainson / Dowels

EI;Supply of 3 Core 11 KV 95 Sqmm HT XLPE (E) armoured Cable. As per IS specification confirming to IS 7098/II/85 with latest ammendments. Makes : Torrent / Unicab / Universal / Polycab / Havells

EI;Providing and errecting heat shrinkable indoor termination kit for 11 KV XLPE HT cable 3 core 70-95 Sqmm with necessary materials etc., complete. Makes : Raychem / Transeal / M Seal

EI;Providing and errecting heat shrinkable outdoor termination kit for 11 KV XLPE HT cable 3 core 70-95 Sqmm with necessary materials etc., complete with anti tracking red colour material as per IEC / IS specs Makes : Raychem / Transeal / M Seal

EI;Supply transpotation and erection of box pole made up of 2 nos. 170mm x 85mm ( ISMB Modified ) by welding or equivalent about 30'-0 length RS joist box pole erection of the same Including excavation of pit in all kinds of soil including breaking stones, concreting with (1:3:6) mixture base plate, coil earthing back filling, coping including two coats of red oxide primary painting and two coats of aluminium painting etc., complete as required. ( A.R. in IDOC Kamareddy)

EI;Supply of Rubber hand gloves suitable for 11 KV.

EI;Providing & Fixing of Shock instrution chart in English / Hindi / Telugu duly framed with front glass.

EI;Providing & Fixing of Danger Notice Plates of size 250x200mm, shall comply with IS:2551-1982.

EI;Providing floor mounting stand for keeping 4No of fire bucket 1500mm length, 900mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of enamel paint.

EI;Providing & Supply of round bottom G.I sheet bucket of 9 Ltrs. Capacity as per IS:2546 made out of 24 gauge GI sheet with extra handle at bottom duly painted inside and red out side with printed with FIRE Mark for stand and hook and filled with sand and arranged to existing stand or hook.

EI;Preparation of Drawings of existing or new installations and obtaining approval from the CEIG complete as per the requirement at site.(AR)

EI;Supply, Transporttion, installation, Testing and commissioning of Outdoor type floor mounted metal clad HT panel totally enclosed and fully inter locked horizantaldraw out , horizantal isolated type breaker as per IS 13118 Specifications with air insulated Allunium bus bars of 630A capacity, with following switch gear . Make: Scheinder / Siemens/Crompton/ABB/L&T Greeves/Kirloskar . 1 No- 11 KV,630 A,not less than 18KA, Horizontal Draw Out VCB - 1No fitted with Manual/Motor Operatedspring charging mechanism with 230V AC Motor,shunt trip coil of 24 V DC,Closing coil of 24 V DC,Aux contact 4NO/4NC,Mechanical ON/OFF indicator & push button,mechanical operating counter POWER PACK: Supply,Installation,testing and commissioning of Power pack with 230V input and 24V DC continuous out put suitable for closing/tripping/indication of 1 Nos VCBs with 2.5sqmm FRLS copper cable etc as required. POTENTIAL TRANSFORMER:3 Phase Cast resin fixed type PT of Ratio : 11KV/110V Core-1: Cl- 0.5, 50VA for metering, with HT HRC fuses & LT fuses "CURRENT TRANSFORMER:CL 0.5/5P10 / 15-15VA, 3 Nos 50 /5A PROTECTION: 1 Nos. NON DIRECTIONAL COMBAINED OVER CURRENT & EARTH FAULT RELAY WITH IDMT+INST ELEMENTS Anti pumping PLA Relay. Metering: Digital type Ammeter and selector switch. - 1No Digital type Voltmeter with 0-15KV range, slector switch for Voltmeter. - 1No Digital multifunction meter - 1 No Indication lamps:LED indication lamps for breaker on, breaker off, spring charge indication, trip ciruit healthy with push button, Auto trip indication meter, Auxilary contact for service test position ( 4No+ 4 NC) service and test positions and R/Y/B indication lamps. Control switches:T-N-C Breaker control switch Local / Remote Selector switch Trip circuit healthy push button Test Terminal block Hooter with accept and reset buttons Control wiring with appropriate colours required masonary work etc complete with connections

EI;Main Panel (Out Door Panel LT) TF 1: Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted MV panel of double door type made out of No.14 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN with suitable bus bars (with rating of 0.8A/ Sqmm) for Power load and Generator load separately, supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below.The panel shall be got manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materials & labour charges. Supply of 630A 4 Pole MCCB / Confirms to IS/IEC 60947-2 having Breaking Capacity 50 KA with thermal magnetic release Panel Mounted. Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. 1No Extended (ROM) Rotatory handle Spreader links 630A 4pole Supply of 400A 3 Pole MCCB / Confirms to IS/IEC 60947-2 having Breaking Capacity 50 KA with thermal magnetic release Panel Mounted. Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. 1No Extended (ROM) Rotatory handle Spreader links 400A 4pole Supply of 125A 3 Pole MCCB / Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 3 Nos Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak Rotaory Handle .Spreader links Supply of 250A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted. Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. - 2 Nos Rotaory Handle Spreader links Supply and erection of LED indicator lamps on the existing box / panel board. Makes : L&T / C&S / SALZAR / HPL MAKE. - 3 Nos Supply of 6A 10KA FP MCB, C/D Curve ISI Mark-1 No Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree.

EI;Main LT Panel E14 (CHANGEOVER PANEL):Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted MV panel of double door type made out of No.14 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN with suitable bus bars (with rating of 0.8A/ Sqmm) for Power load and Generator load separately, supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below.The panel shall be got manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materials & labour charges. Supply of 400A 4 Pole Change Over Switch on Load with open Execution. Makes : Socomec / L & T - 1 No Extended (ROM) Rotatory handle Spreader links 400A 4pol Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 Noe MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS.Supply and erection of 0-1000A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 NoMAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 No Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of LT current transformer with bar primary 630 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA Supply of 6A 10KA FP MCB, C/D Curve ISI Mark-1 No Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree.

EI;OUT GOING FEEDERS Supply of 250A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 36/35 KA with thermal magnetic release Panel Mounted.-2 Nos Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. Rotaory Handle Spreader links "Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. 2 Nos" Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak.

EI;Rotaory Handle Spreader links Supply of 63A / 60A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.4 Nos Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. Rotaory Handle Spreader links

EI;Main LT Panel Block A&B Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted MV panel of double door type made out of No.14 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN with suitable bus bars (with rating of 0.8A/ Sqmm) for Power load and Generator load separately, supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below.The panel shall be got manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materials & labour charges.Supply of 250A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted of makes - 1 No Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak.Rotaory Handle Spreader links Metering Set:Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 NoMAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of 0-250A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 NoMAKES : CONZERVE / ELMEASURE / L&T / SEIMENS.Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 NoMakes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 NoMakes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Makes : L&T / C&S / SALZAR / HPL MAKE.Supply and erection of LT current transformer with bar primary 160 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA

EI;OUT GOING FEEDERS "Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. 5 Nos" Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. Rotaory Handle Spreader links Supply of 100 A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted 2 Nos Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. Rotaory Handle Spreader links Supply of 63A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. 3Nos Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. Rotaory Handle Spreader links Supply of 40-63A 10KA TP MCB, C/D Curve ISI Mark. 15 Nos Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. Supply of 40-63A 10KA DP MCB, C/D Curve ISI Mark-1 Nos Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree.

EI;Main LT Panel Block C&D Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted MV panel of double door type made out of No.14 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN with suitable bus bars (with rating of 0.8A/ Sqmm) for Power load and Generator load separately, supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below.The panel shall be got manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materials & labour charges.Supply of 250A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted - 1 No Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak.Rotaory Handle Spreader links Metering Set:Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 NoMAKES : CONZERVE / ELMEASURE / L&T / SEIMENS.Supply and erection of 0-250A Digital Ammeter of size 96x96mm on existing box / panel boardincludingconnections etc., complete. - 1 NoMAKES : CONZERVE / ELMEASURE / L&T / SEIMENS.Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 NoMakes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of selector switch for voltmeter on the existing box / panel includingconnections etc., complete. - 1 NoMakes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of LED indication lamps on the existing panel board. - 3 NosMakes : L&T / C&S / SALZAR / HPL MAKE.Supply and erection of LT current transformer with bar primary 160 / 5A ratio in the existing panel including connections etc., complete. - 3 NosMAKE : KAPPA Supply of 6A 10KA FP MCB, C/D Curve ISI Mark-1 No Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree.

EI;OUT GOING FEEDERS Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.3Nos Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. Rotaory Handle Spreader links Supply of 63A / 60A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.1No Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. Rotaory Handle Spreader links Supply of 40-63A 10KA TP MCB, C/D Curve ISI Mark.8Nos Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. Supply of 40-63A 10KA DP MCB, C/D Curve ISI Mark-3 Nos Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree.

EI;Main LT Panel Block E-15 for LT Supply Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted MV panel of double door type made out of No.14 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN with suitable bus bars (with rating of 0.8A/ Sqmm) for Power load and Generator load separately, supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below.The panel shall be got manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materials & labour charges.Supply of 630A 4 Pole MCCB / Confirms to IS/IEC 60947-2 having Breaking Capacity 50 KA with thermal magnetic release Panel Mounted. Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. - 1 No Extended (ROM) Rotatory handle Spreader links 400A 4pole Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of 0-1000A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 No Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of LT current transformer with bar primary 630 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA Supply of 6A 10KA FP MCB, C/D Curve ISI Mark-1 No Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora.

EI;OUT GOING FEEDERS Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.6Nos Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. Rotaory Handle Spreader links Supply of 160A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.1Nos Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. Rotaory Handle Spreader links Supply and fixing of three phase Electronic energy Meter, 415V AC,50 HZ as per IS13010 up to 160A range with 200% over load capacity complete with connections etc., complete on the existing board. 7Nos MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS.

EI;Supply and erection of LT current transformer with bar primary 160 / 5A ratio in the existing panel including connections etc., complete. 21Nos Make : Kappa Meetering Panel GF-1 Block C&D Panel Supply installation testing and commissioning of free standing cubibal type meter panel board made out of 16 Gauge CRCA sheet steel, the panel shall be painted after processing 7 tank process with RAL 7032 siemens grey. The panel shall be consisting of suitable rating of Copper bus bars of equal rating for phase and neutral (At the rating of 1.2 A/Sq.mm) supported with DMC/SMC and colour coded with heat shrinkable sleeves, The bus bar fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, other authorities etc. The panel shall be suitable for accomodating the following switch gears and for accomodating the Single phase meters (2 Nos)/three phase meters (7 Nos) including supply of all components, hardwares, provision for locking arrangement provision for meter cubibals as per the TSSPDCL/TSNPDCL norms etc including all necessary civil works, adequate reinforcement foundation bolts suitable G.I. earth strip, MS base channel etc complete, (Pnel shall be as per SLD). Supply of 125A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 1 No Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of 0-1000A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No Makes : L&T / C&S / SALZAR / HPL MAKE.

EI;Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of LT current transformer with bar primary 630 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA Supply of 6A 10KA FP MCB, C/D Curve ISI Mark-1 No Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. OUT GOING FEEDERS Supply of 40-63A 10KA FP MCB, C/D Curve ISI Mark.7Nos Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. Supply of 40-63A 10KA TP MCB, C/D Curve ISI Mark.12Nos Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. "Supply of 40-63A 10KA DP MCB, C/D Curve ISI Mark-2 Nos " Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree.

EI;Meetering Panel FF Block A&B & SF A&B Supply installation testing and commissioning of free standing cubibal type meter panel board made out of 16 Gauge CRCA sheet steel, the panel shall be painted after processing 7 tank process with RAL 7032 siemens grey. The panel shall be consisting of suitable rating of Copper bus bars of equal rating for phase and neutral (At the rating of 1.2 A/Sq.mm) supported with DMC/SMC and colour coded with heat shrinkable sleeves, The bus bar fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, other authorities etc. The panel shall be suitable for accomodating the following switch gears and for accomodating the Single phase meters (2 Nos)/three phase meters (7 Nos) including supply of all components, hardwares, provision for locking arrangement provision for meter cubibals as per the TSSPDCL/TSNPDCL norms etc including all necessary civil works, adequate reinforcement foundation bolts suitable G.I. earth strip, MS base channel etc complete, (Pnel shall be as per SLD). Supply of 125A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.- 1 No Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of 0-1000A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 No Makes : L&T / C&S / SALZAR / HPL MAKE.

EI;Supply and erection of LED indication lamps on the existing panel board. - 3 NosSupply and erection of LED indication lamps on the existing panel board. - 3 Nos Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of LT current transformer with bar primary 630 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA Supply of 6A 10KA FP MCB, C/D Curve ISI Mark-1 No Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. OUT GOING FEEDERS Supply of 40-63A 10KA FP MCB, C/D Curve ISI Mark.7Nos Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. Supply of 40-63A 10KA TP MCB, C/D Curve ISI Mark.17 Nos Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. "Supply of 40-63A 10KA DP MCB, C/D Curve ISI Mark-2 Nos " Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree.

EI;Meetering Panel FF Block C&D Suupply installation testing and commissioning of free standing cubibal type meter panel board made out of 16 Gauge CRCA sheet steel, the panel shall be painted after processing 7 tank process with RAL 7032 siemens grey. The panel shall be consisting of suitable rating of Copper bus bars of equal rating for phase and neutral (At the rating of 1.2 A/Sq.mm) supported with DMC/SMC and colour coded with heat shrinkable sleeves, The bus bar fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, other authorities etc. The panel shall be suitable for accomodating the following switch gears and for accomodating the Single phase meters (2 Nos)/three phase meters (7 Nos) including supply of all components, hardwares, provision for locking arrangement provision for meter cubibals as per the TSSPDCL/TSNPDCL norms etc including all necessary civil works, adequate reinforcement foundation bolts suitable G.I. earth strip, MS base channel etc complete, (Pnel shall be as per SLD).Supply of 125A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 1 No Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete.- 1 No MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of 0-1000A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 No Makes : L&T / C&S / SALZAR / HPL MAKE.

EI;Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of LT current transformer with bar primary 630 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA Supply of 6A 10KA FP MCB, C/D Curve ISI Mark-1 No Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. OUT GOING FEEDERS Supply of 40-63A 10KA FP MCB, C/D Curve ISI Mark.8 Nos Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. Supply of 40-63A 10KA TP MCB, C/D Curve ISI Mark.17 Nos Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. "Supply of 40-63A 10KA DP MCB, C/D Curve ISI Mark-2 Nos " Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree.

EI;Meetering Panel SF Block C&DSupply installation testing and commissioning of free standing cubibal type meter panel board made out of 16 Gauge CRCA sheet steel, the panel shall be painted after processing 7 tank process with RAL 7032 siemens grey. The panel shall be consisting of suitable rating of Copper bus bars of equal rating for phase and neutral (At the rating of 1.2 A/Sq.mm) supported with DMC/SMC and colour coded with heat shrinkable sleeves, The bus bar fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, other authorities etc. The panel shall be suitable for accomodating the following switch gears and for accomodating the Single phase meters (2 Nos)/three phase meters (7 Nos) including supply of all components, hardwares, provision for locking arrangement provision for meter cubibals as per the TSSPDCL/TSNPDCL norms etc including all necessary civil works, adequate reinforcement foundation bolts suitable G.I. earth strip, MS base channel etc complete, (Pnel shall be as per SLD). Supply of 125A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 1 No Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete.- 1 No MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of 0-1000A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 No Makes : L&T / C&S / SALZAR / HPL MAKE.

EI;Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of LT current transformer with bar primary 630 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA Supply of 6A 10KA FP MCB, C/D Curve ISI Mark-1 No Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. OUT GOING FEEDERS Supply of 40-63A 10KA FP MCB, C/D Curve ISI Mark.9 Nos Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. Supply of 40-63A 10KA TP MCB, C/D Curve ISI Mark.17Nos Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. "Supply of 40-63A 10KA DP MCB, C/D Curve ISI Mark-2 Nos " Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree.

EI;Supply installation testing and commisioning of free standing cubical type panel board made out of 16 Gauge CRCA sheet steel, The Panel shall be painted after processing 7 tank process with RAL 7032 seimens grey. The panel shall be consisting of suitable rating of alluminium bus bars of equal rating for phase and neutral (at the rate of 0.8 A/ Sqmm) supported with DMC/SMC and colour coaded with heat shrinkable sleaves. The busbars fault level shall be 50 KA and shall be as per the requirement of Local CEIG, Fire regulations, other authorities etc. The panel shall be suitable for accomodating the following switch gears including supply of all components, hardwares, etc including all neccessary civil works etc complete, the panels should be consist with Incomer : 125 A 4Pole MCCB, Adjustable Confirms to IS/IEC 60947-2 having breaking capacity 25 KA with thermal magnatic release Panel mounted including Rotaory Handle, Spreader links,,- 1 Nos, and Outgoing : - 40-63 A 10 KA TP MCB, C/D Curve ISI Mark 4 Nos., LED indication lamps , 6A 10KA FP MCB, C/D Curve ISI Mark-1 No for control wiring etc.The panel shall be mounting on U-Channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materials & labour charges as directed by the departmental officers. MCCB Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak. MCB Make : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree.

EI;Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal / Polycab / Havells

EI;Supply and Fixing of single compression brass cable glands for 4 core XLPE armoured cable up to 16.0 Sq.mm with brass washers complete. Makes: SMI / Commet / Dowels.

EI;Supply and fixing of crimping type aluminium lugs confirming to I.S specifications for cable upto 16 Sq.mm including nuts and bolts with connections. Makes: DMI / Jainson / Dowels

EI;Supply and Transportation of Outer dia 50mm and Inner dia 38mmdouble walledcorrugated HDPE duct made as per specification BSEN - 500 86/IS14930 Part-II with all accessories like couplers, bends, end caps, Tsetc., complete. Makes: DURA LINE (Dura Guard).

EI;Supply and Installation of 300mm x 50mm x 2mm thick GI Ladder type cable tray along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete. Makes: DEC/MNR/ H FAB

EI;Earth work excavation of Trench in hard ground soil and laying of U.G cables up to 70 sqmm covering the cable with back filling of Trench including cost and conveyance of materials and labour charges etc., complete.

EI;Labour charges for run of U.G cables in existing hume pipe with all Labour charges etc complete

EI;Supply of heavy duty type double compression cable glandswith brass checknut, outer sheath sealing gasket suitable for 185 Sq mm 3.5 Core XLPE insulated armoured cable etc complete. Makes: SMI / Commet / Dowels.

EI;Providing independent G.I Earthling by excavating a pit to a depth of 2.25Mt in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length enclosed in CC chamber of 400m x 400m x 400m with RCC slab cover duly providing staggered 16 Nos holes , GI strip with holes welded at the top (for earth wire connection),and accessories including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder in layers, GI bolts, nuts washers and all labour charges etc., complete .

EI;Providing independent earthing by excavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr length with funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I. pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick masonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982

EI;NOTE: 1.Agency shall take indication from the Engineer Incharge before commencement of work. 2.Detailed measuremts shall be subitted to Engineer Incharge after completion of the work. 3.And also it is the responsibility of the agency to get certified from the quality control wing, for final settlement of the bill. 4.The Agency shall have to produce copy of original invoice of the material used in the work.