Roads And Buildings Department Tender

BOQ;Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.

BOQ;Filling with carted gravel by manual means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).

BOQ;Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe500/500D/550 Dgrade asper IS1786-1979 manufactured by Primary producers like TATA, SAIL, VSP, Jindal (asapproved by Ministry of steel guidelines) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing inposition with cover blocks of approved materials and size and tying and lap-splicing with binding wire, for minggrills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars tosite, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of bindingwire, coverblocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)