Roads And Buildings Department Tender

road safety intervensions;Supplying and installation of Hazard Markers using M.S angle of size 55x55x6mm and 120cm high above ground level painted with two coats of black & white stripes of 15cm wide with first quality synthetic enamel paint over one coat of appropriate primer of approved brand colour with 30cm x 90cm type XI ASTMD 4956-09 wide angle cube concerned micro prismatic retro reflective sheeting of yellow colour and confirming to IRC 67:2012. Fixed over 3mm aluminium composite material having minimum 0.30mm thick aluminium skin on both sides with standard supports consisting of alternately black and yellow stripes, with black stripes in screen printing sloping downward at an angle of 45o towards the side of the obstruction on which the traffic is to pass and buried into the ground in a trench of size 30cm x 30cm and 50cm depth filled with CC M20 including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading and unloading charges necessary for successful completion of the work as directed by the Engineer - in - charge and conforming to IRC 67 - 2012 & MORT&H specification no.805 and approved drawings etc., complete for finished item of work.

road safety intervensions;Providing and fixing Cautionary/warning sign boards 900mm Triangle made out of Type -XI of ASTM D4956-09 wide angle cube corncern micro prismatic retro reflective sheeting and confirming to IRC 67/2012 for full back ground of white colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 3mm aluminium composite material (ACM) sheet having minimum of 0.30mm thick aluminium skin on both side with back side painted grey colour and fixed over back support frame of MS angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1m from the ground level the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black & White colour with bands of 30 cm height. The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M15 concrete foundation of size 450x450x600mm, including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by Engineer - In - Charge.

road safety intervensions;Providing and fixing Mandatory/regulatory sign boards 900mm circle made out of Type -XI of ASTM D4956-09 wide angle cube corncern micro prismatic retro reflective sheeting and confirming to IRC 67/2012 for full back ground of white colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 3mm aluminium composite material (ACM) sheet having minimum of 0.30mm thick aluminium skin on both side with back side painted grey colour and fixed over back support frame of MS angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1m from the ground level the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black & White colour with bands of 30 cm height. The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M15 concrete foundation of size 450x450x600mm, including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by Engineer - In - Charge.