Roads And Buildings Department Tender

Periodical Renewal to Peddathanda Mogilicherla road from km 0/0 to 0/915 in Mahabubabad District;Supplying of hot applied thermoplastic road marking compound, 2.5mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass Beads on Bituminous Surface at 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass bead as per IRC: 35, the material should be of BERGER Company/ BERGER Equivalent and must comply with the following: a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab. In case the department approves the white index of any vendor, the department engineer may carryout random checking of the applied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department). b) Luminance factor of the material should be in the range of 80-85% at 45 degree centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262, Part-1, 1989 and should pass at the range of '0' degree centigrade to '-10' degree centigrade D) Adhesion : Strong E) Softening point: 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS: 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-1997

Periodical Renewal to Peddathanda Mogilicherla road from km 0/0 to 0/915 in Mahabubabad District;Construction of earthen shoulders with selective soils obtained from borrow pits with MDD of 18 KN/Cum, CBR = 10%, PI < 12% from approved sources, grading and consoilidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of MoRT&H, including all hire and operational charges of T&P complete for finished item of work as per MoRT&H specification 305 (5th revision)

Periodical Renewal to Peddathanda Mogilicherla road from km 0/0 to 0/915 in Mahabubabad District;Providing 30mm thick compacted Bituminous concrete with 40-60 TPH HMP/100-120 TPH Batch mix plant using HBG crushed aggregates of Grading-3 as per specification 507nof MoRT&H(5th revision0),Premixed with bitumen VG-30 grade @5.5% of mix and Hydrated lime,transporting the hot mix to work site,laying with full width paver to the required grade,level and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification 507 (5th revision)complete for finished item of work in all respects as directed by Engineer-in -charge.

Periodical Renewal to Peddathanda Mogilicherla road from km 0/0 to 0/915 in Mahabubabad District;Providing and applying tack coat with bitumen 80/100 Grade (Bulk) using pressure distributor at the rate of 0.20 kgs per sqm on the prepared bituminous/granular surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.