Roads And Buildings Department Tender

RSI Work;Supplying and installation of Hazard markers/Delinators using MS angle of size 55x55x6 mm abd 120cm high above ground level pained with two coats of black and white stripes of 15cm wide with first quality synthetic enamel paint over one coat ofappropriate primer of approved brand, colour, with 30cmx90cm Type-XI of ASTND 4956-09 wide angle cube cornered miceo prismatic Retro reflective sheeting of Yellow colour and confirming to IRC 67:2012 fixed over 3MM Alluminium composite Material having minimum 0.30mm thick Aluminium skin on both sides with 8 standard supports conisting of alernately black andyellow with black stripes in screenpriting sloping downward at an angle of 45 degrees towards the side of the obstruction on which the traffic is to pass and buried into the ground in a trench of size 30cm x 30cm and 50cm depth filled with CC M-20 including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading and un - loading charges necessary for sucessfull completion of the workon any road n divison as directed by Engineer - in - Charge and conforming to IRC 67-2012 & MORT &H specification No 805 and approved drawings etc., complete for finished item of work. Aloor-Mirdhapally road from km.0/0 to 3/600.

RSI Work;Supply and installation of delineators (Double sided) (Roadway indicators) not less than 800mm high above level. The delineator shall have a core and shell construction which shall be made of tough, high impact resistant, injection-moulded, thermoplastic outer body. The inner core shall consist of powder coated or painted Mild steel of minimum thickness 1.0mm . The delineator should have top retro-reflective unit consisting of white colour micro prismatic non metallic tetro -reflective sheeting of minimum 125 cm2 and bottom retro-reflective unit consisting of red colour micro prismatic non metallic retro-reflective sheeting of minimum exposed area of 35 cm2 each side confirmingto ASTM D4956 type XI standards. The delineators shall be fixed to the ground by inserting the root of the delineator up to the marked portion and by firm concrete filling as per the instructions by Engineer-in-Charge. Aloor-Mirdhapally road from km.0/0 to 3/600.

RSI Work;Providing and fixing Village Name boards of size 600 x 800mm made out type -XI of ASTMD 4956-09 High Inensity Prismatic Retro reflecive sheeting and confirmingto IRC 67:2012 for full background in Green colour & White Letters and fixed over 4MM Alumimium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1m from the gound level to the bottom of the board. The sign post should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The sign post shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 concrete foundation of size 450x450x600mm including cost and conveyance of all materials, equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer-in-charge.(E.I.C Circular memo roads signages /DCE(R)/EE-II/DEE-7/AEE(NLG)2013-14 DATED;15-05-2013. Aloor-Mirdhapally road from km.0/0 to 3/600.

RSI Work;Providing and fixing Mandatory / Regulatory sign boards size 600mm circle made out of Type-XI of ASTMD 4956-09 High Inensity Prismatic Retro reflecive sheeting and confirmingto IRC 67:2012 for full background in Red colour and fixed over 4mm Alumimium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1m from the gound level to the bottom of the board. The sign post should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The sign post shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 concrete foundation of size 450x450x600mm including cost and conveyance of all materials, equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer-in-charge Speed limit boards.Aloor-Mirdhapally road from km.0/0 to 3/600.

RSI Work;Providing and fixing Cautionary /warning Sign boards size 900mm circle made out of Type-equilateral triangle made out of Type-XI of ASTMD 4956-09 High Inensity Prismatic Retro reflecive sheeting and confirmingto IRC 67:2012 for full background in Red colour and fixed over 4mm Alumimium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1m from the gound level to the bottom of the board. The sign post should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The sign post shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 concrete foundation of size 450x450x600mm including cost and conveyance of all materials, equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer-in-charge.(E.I.C circular memo roads signages/DCE(R) EE-II/DEE-7 AEE(NLG) 2013-14 dt: 15-05-2013 Aloor-Mirdhapally road from km.0/0 to 3/600.

RSI Work;Providing and fixing Junction boards size 1500 x1200 mm made out of Type-XI of ASTMD 4956-09 wid angle cube conered micro Prismatic Retro reflecive sheeting and confirming to IRC 67:2012 for full background of Green Colour and white colour letters and fixed over 4mm Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1m from the gound level to the bottom of the board. The sign post should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The sign post shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 concrete foundation of size 450x450x600mm including cost and conveyance of all materials, equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer-in-charge. Aloor-Mirdhapally road from km.0/0 to 3/600.

RSI Work;Supply & Fixing of Molded shanks Raised Pavement Markers made of Plastic body moulded from HIPS(HI-Impact Polysterene) or ABS or ASA (Scrylic Strene Acroylonitrite and reflective panels with micro prismatic lens capableof providingtotal internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No. RW/NH/33023/10-97 -DO III Dt:11.06.1997 . The height width and length shall not exceed 50mm 100mm and 100mm and with minimum reflective area of 13 sqcm on each side and the slope to the base shall be 35+/-5 degree. The strength of detachment of the inegrated cylindrical shanks, (of diameter not less than 19+/-2mm and heigt not less than 30+/-2mm) from the body is to be a minimum value of 700 kgs. Fixing will be by drilling holes on the road for the twin shanks to go inside, without nails and using +B258 epoxy resin based adhesive as per manufacture's recommendation and complete as directed by the engineer. Aloor-Mirdhapally road from km.0/0 to 3/600.

RSI Work;Supplying of Hot applied Thermoplstic marking compound 2.5mm thick including reflectorising glass beads @ 250gms with REflectorising Glass beads on Bituminious surface at 250 gms per sqm area, thickess of 2.5mm is exclusive of surface applied glass bead as per IRC:35, the material shouldbeof BERGER Company BERGER Equivalent and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab. In case the department approves the white index of any vendor, the department engineer ma carryout random checking of the applied products at site against t he approved panel. In case of any major deviation beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment ofthe said material and will compell thevendor has to replace the full consignment by the man days (as per the ruls of the department) b) Lminance factor of the material should be in the range of 80-85% at 45degree contigrade as per AASTHOM 249, C) Crack resistance : The applied panel cured for 7 days under ambient condition and the should be tested as per BS3262, Part I 1989 and should pass at the range of '0' degree Centrigrade to '-10' degree centrigrade D) Adhension: Strong D) Softening point : 102 degree centrigrade f) Dried film finish : smooth and uniform G Night vision: High asdirected by the Engineer-in-Charge and confirmingto IS: 164 1961 (1st revision reaffirmed in 1986 ) and clause coforming to IRC 35-1977. Aloor-Mirdhapally road from km.0/0 to 3/600.