Roads And Buildings Department Tender

Ei;Supply ,Transportation and Laying of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 16205 Part24 : 2017 with all accessories like couplers, bends, end caps, Ts etc., complete. Makes: Bajaj / CPE

Ei;Foundation and erection charges with special T&P, for 4.5 Mtrs to 7.50 Mtrs long Octagonal / Conical pole duly erecting on base plate duly provided 4 Nos foundation bolts with nuts with providing vibrated concreting mixing with necessary steel (10kgs) reinforcement as directed by the field engineers during execution including centering, decentering, water curing as required, soil exacavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance of materials etc. complete.

Ei;Supply and fixing of suitable out door feeder piller box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schnieder make 40A-63A, 4 Pole MCB as incomer, 6 Nos 6-32A SP MCBs as out goings, indication lamps, din channel, 6 Sqmm 3 core copper cable for invidual light control, connectors, bus bars, shroudings, gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision for connecting the nature switch with following.

Ei;Fabrication, transportation and supply of IP-65, 5M HEIGHT ARCHITECTURAL POLE Make Klite : KP-4224 Driveway Orna Bishop, pole size:88.9Pole type 12, double arm Pole with KL-6789 Aston 2, 2 x 60W LED3000K , Including KL-8160 Connector Dimension: 342 x 135 x 245Mounting: SurfacePF: Graphite Grey Optics All pole sections are welded using special v groove technique by certified, welders using high end MIG welding processes, Built-in control box with cast aluminium service door and safety rope, Die cast aluminium door is contoured to the shape of the pole with silicone rubber gasket., The control is prewired with MCB, terminal connectors for loop-in /loop-out arrangement, The foundation bolt holes in the base plate are designed to be elongated for fine adjustments / alignment of the pole during installation, Base plate The pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom Makes-K.LITE