Roads And Buildings Department Tender

Providing Road Safety Interventions in acident prone areas on Major Road District Road near Vepalaga;Providing Rumble Strips in 6 transverse bar with Hot Applied Thermo-plastic compound with 5mm/7.5mm/15mm thick in multiple layers of 2.5mm thick each and 200mm/300mm width including reflectorising glass beads @ 250gms per sqm for top layer on Bituminious surface and top layer thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35 the material should be of BERGER Company/ BERGER Equivalent Equivalent brand and must comply with the following: a) White index for the product should be in the range of 60-70 when measured against standard reference The applied panel 7/8 number must be submitted for checking up the white index in the department lab In case the department approves the white index of any vendor the department engineer may carryout random checking of the applied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department), b) Luminance factor of the material should be in the range of 80-85% at 45 degree centigrade as per AASTHOM 249 c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS 3262, Part-1 1989 and should pass at the range of 'D' degree centigrade to '-10 degree centigrade D) Adhesion Strong E) Softening point. 102 degree centigrade F) Dried film finish Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS: 164-1981 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-2015. The finished surface to be level, uniform and free from streaks and holes atc, complete for finished item of work (with all lifts and leads)

Providing Road Safety Interventions in acident prone areas on Major Road District Road near Vepalaga;Providing and fixing Cautionary / Warning sign boards size 900 mm equilateral triangle made out of Type ?XI of ASTMD 4956-09 High Intensity Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as directed by Engineer -in-Charge.