Roads And Buildings Department Tender

Others;Providing Mild Steel Tubes & pipes of all diameters as per IS-1161, of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings, including cost and conveyance of all Mild steel Tube

Others;Supply and fixing of UV resistant multi-wall polycarbonate sheets for roofing of any colour - 6 mm thick,with using of 75 mm long screws - G.I nuts 8mm dia & dauble limpet wachers of standard size with white lead and seigniorage charges, etc., complete, excluding the cost of purlins, rafters, trusses including cost and conveyance of all materials , labour charges , overheads and contractors profit etc., complete for finished item of work in all floors.

Others;S&f titanium gold sheets on sign board of required size and fixing the same whereever required as per the instructions of the Engineer in charge including all labour, transport, erection at site excluding scaffolding e.t.c for finished item.titanium gold sheets

Others;S&f sign board with 18 gauge steel of required size and fixing the same whereever required as per the instructions of the Engineer in charge including all labour, transport, erection at site excluding scaffolding e.t.c for finished item.

Others;Hire stage Charges for safe & steady cup lock stage access scaffolding with frames made of 50 mm dia B class MS Pipes and bracins with Scaffold boards having a life of 5 years including hire charges for Ms pipe frames, Scaffolds boards and including cost

Others;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part- 4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock

Others;s&f of Brass Door Stoppers

Others;s&f of Brass Tower Bolt-10 mm Bolt (IS:204) 150 mm Long

Others;s&f of Brass fancy handles 250 mm

Others;s&f of Brass Aldrops (IS:2681) 300 mm long

Others;S&f of heavy duty cylindrical locks

Others;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding doors with messhutter ? (2-glass shutters and 1-mesh shutter)-95 - Series duly manufactured using UPVCreinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and notmore than 12 PHR of CaCo3 for every 100 parts ofPVC resin) of (108 mm x 45 mm)/(95.50 mm x 60mm) x 2.20 mm for outer frames, (75 mm x 39mm)/(66 mm x 42 mm) x 2.20 mm for sliding doorshutter frames capable of mounting single glazingsystem, structurally reinforced with hot dipgalvanized up to 50 microns of minimumthickness of 1.2 mm prefabricated & weldedthrough fusion welding the door sash shall befitted with 6 mm thick clear float glass ofreputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be coextrudedwith Grey colour soft PVC. Mesh shuttershall be made of (48 mm x 30 mm))/(50 mm x26.5 mm) x 2.0 mm uPVC profile section andfitted with Vinyl Coated Fibre mesh androllers/pulley duly fixed with TPV Gasketsweathering seal resistant Door shall be provided with standard hardware & multi point lockingsystem of Patio/Roto espagulate and the systemis to be installed at the site using anchorfasteners, silicon rubber sealant, easy glazing/deglazing at site etc., including cost andconveyance of all materials, accessories, labourcharges for transportation, erection at site complete for finished item of work.593 TBSC-L.III-11 Supplying and fixing of Unplasticized Po

Others;Supplying and fixing of Single shutter door with sal wood door frame of size 100x65mm and flush door shutters of 35mm thick solid bond wood block board type with commercial ply ON BOTH faces conforming to IS:2202 including 6 no.s MS Z Hold fasts - 300 mm long, cost of 1 no. Aluminium Aldrops (IS:2681) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 1 no. Aluminium Tower Bolt-10 mm Bolt (IS:204) 250 mm Long, 2 no.s Aluminium Door Handles (IS:208) 150 mm Long, 3 no.s Aluminium Butt hinges (IS:205)- 125 mm Long, 1 no. Heavy duty Aluminium Door stopper, 1 no. Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002

Others;Skirting with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering.

Others;Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)

Others;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer.

Others;Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for internal walls - :-Internal Colouring - Providing Putty.

Others;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

Others;Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contractors profit etc., complete for finished item of work. (APSS No. 501 & 504).