Roads And Buildings Department Tender

Certain sanitary repairs to the common wash rooms in the Oo the Superintending Engineer;SUPPLY and FIXING or RAJSHRI or Equivalent SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME CHOUKHAT Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm made out of extruded 5mm rigid Pac single side prelam sheet meter cut at two corners and joined with 2nos. of 150mm long brackets of 1515mm MS.Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of 19guage. The door frame shall be fixed to the wall using 65100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member and Providing and fixing 30mm thick RAJSHRI or Equivalent BRAND FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles top and bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat moulded Rajshri Prelam Pac C channel of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 450 angle on either side forming stiles and 5mm thick 95mm wide Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail 115mm wide Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rail shall be provided either side of the panel. 10mm 5mmX2 thick 20mmwide cross Pac sheet shall be provided as gap insert for top and bottom rail. Panelling of 5mm thick both side Prelam Pac sheet to be fitted in the MS. Frame welded sealed to the stiles and rails with 7mm 5mm 2mm thick X 15mm wide Pac sheet beading on inner side and joined together with solvent cement adhesive etc. an additional 5mm thick Pac strip of 20mm width is to be stuck on the interior side of the C channel using Pac solvent cement adhesive etc. including aluminium fixtures such as 3Nos. Aluminium Butt hinges IS 205- 100 mm Long 2Nos. Aluminium Door Handles IS 208 100 mm Long 1No. Aluminium Al drop IS 2681 200 mm long 1No. Aluminium Tower Bolt-10 mm Bolt IS 204 200 mm Long including fixing shutter to the frame cost and conveyance of all materials to work site and all operational incidental labour charges etc. complete and cost of overheads and contractors profit for finished item of work.

Certain sanitary repairs to the common wash rooms in the Oo the Superintending Engineer;Supply and fixing of PVC low level system with internal components and short bend 10 Litres capacity Single Flush TBSP-H.II-07

Certain sanitary repairs to the common wash rooms in the Oo the Superintending Engineer;S and F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter tur n spindle internal external threaded connection conforming to IS 8931