Roads And Buildings Department Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
₹ 11,29,305Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Minor Bridge And Major Bridge On Munugode - Nampally Road From Km 12/0 To 28/4
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
562591Tender No
CE(R&B), SR & CRN NIT No. 2024/CE(R)/KMM/EE(R)/DEE-2/AEE-3/2024-25/NLG/1, Dt: 12.12.2024Tender Authority
Roads And Buildings Department ViewPurchaser Address
-Website
http://http://www.rnbgujarat.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Foundations using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision)for footings of abutmentsPiers, cut-off walls and Wing walls below sill Level
284
5789
1644076
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Substructure using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision) for sub structureof abutments and Wing walls below sill Level upto 5.0m Height
263
6123
1610349
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Substructure using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision) for sub structureof abutments and Wing walls below sill Level 5.0m - 10.0m Height
27
6346
171342
... More
Bridge work;Vibrated Reinforced Cement Concrete M25 Mix in sub structure using 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700 & 2200 (5th revision)for Abutmnet bed blocks & backing walls, pier bed blocks sub structure upto 5.0m Height
11
6645
73095
... More
Bridge work;Vibrated Reinforced Cement Concrete M25 Mix in sub structure using 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700 & 2200 (5th revision)for Abutmnet bed blocks & backing walls, pier bed blocks sub structure 5.0m - 10.0m Height
5
6862
34310
... More
Bridge work;V.R.C.C concrete M -30 grade for Super Structure with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 (5th revision)as per MOST Drg. No: SD/114 5.0m - 10.0m Height
170
7596
1291320
... More
Bridge work;Reinforced Cement Concrete M30 for Approach Slab with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 &2704(5th revision)as directed by Engineer-in-Chrge for approach slab
29
6185
179365
... More
Bridge work;V.R.C.C. M30 grade concrete with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming to table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawing BD/1-69A and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 &2702(5th revision)as directed by Engineer-in-Charge for wearing coat over deck slab
22
6190
136180
... More
Bridge work;Plain Vibrated Cement Concrete M15 Mix using 40mm HBG (SS5) graded M/C metal including cost and conveyance of all materials , centering, machine mixing, laying,vibrating, finishing curing including hire and operational charges of all T&P etc., and including island formation and diversion of flow of water, if necessary etc., complete for Levelling course below approach slab as per drawings and technical specifications & as per MoRT&H Spcn. No 2700.
8
5566
44528
... More
Bridge work;Vibrated Reinforced cement concrete in super structure complete as per darwing and techincal specifications as per MORT&H specification nos 1500,1700 & 2200 VRCC M-40 for Crash barriers excluding cost of steel and its fabrication charges as per approved drawing.
19
7110
135090
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Foundation
3
86228
258684
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Sub structure
5
86558
432790
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Super structure
19
88842
1687998
... More
Bridge work;Providing Grouted Revetment with rough stone (HBG) of not less than 300 mm size grouted with 0.20 cum of CC (1:4:8) including cost, seigniorage charges and conveyance of materials to site and including labour charges for packing the stones for revetment etc., complete for finished item of work as per MoRT&H specification 2504 ( 5th revision ) and as directed by the Engineer-in-Charge for quadrantial revetment.
37
2843
105191
... More
Bridge work;Pitching with 300 mm size rough stone including cost, and conveyance of materials to site and including labour charges for packing the stones for revetment etc., complete for finished item of work as per MoRT&H specification 2504 ( 5th revision ) and as directed by the Engineer-in-Charge for Pitching of slopes for Toe wall.
13
1903
24739
... More
Bridge work;Providing and laying filter material with selected earth underneath pitching in slopes including cost, and conveyance of materials to site including labour charges etc., complete for finished item of work as per MoRT&H Specification 2504 (5th Revision) and as directed by the Engineer-in-Charge under Revetment.
19
368
6992
... More
Bridge work;Back filling behind Abutments with selected earth including cost ,conveyance and of all materials to site etc., complete as per Clause 710.1.4 of IRC : 78and as per MoRT&H Specification No. 2200 (5th Revision) and as per Drawing and technical specifications for finished item of work
125
368
46000
... More
Bridge work;Providing filter media with granular material/ crushed stone aggregates satisfying the requirements laid down in clause 2504.2.2 of MORT&H (Rev. V) specifications to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards wall and provided over the entire surface, behind abutment, and return wall to the full height and compacted to a firm condition complete as per drawing and technical specifications as per MORT&H Spcn. No. 2200 and as per Clause No of 710.1.4 of IRC 78 .
108
2165
233820
... More
Bridge work;Providing weep holes in Brick masonry/Plain/Reinforced concrete Abutment/wing wall/Return wall with 100mm dia meter A/C pipe extending through the full width of the structure with slope of about 1 V : 20H towards drawing face Complete as per drawing and technical specification, complete for finished item of work for weep holes as per MORTH specification No 2706 & 2200 (5th Revision)
143
456
65208
... More
Bridge work;Supplying and fixing of C I drainage spouts complete as per MOT Drg No SD/
4
1444
5776
... More
Bridge work;Providing 25.4 mm mastic pads for longitudinal joints, Transverse expansion joints and construction joints of approved quality including cost of conveyance and placing in position etc., as directed by the engineer in charge
56
1186
66416
... More
Bridge work;Forming embankment with borrowed useful earth (Selected earth with a lead of 10.0km) from outside road boundary by mechanical means upto SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (5th revision) (Payment will be made based on level for finished item of work). For Shoulder only
3302
378
1248156
... More
Bridge work;Construction of Granular sub-base by providing HBG material confirming to Grading - VI of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge. (Payment will be made based on level for finished item of work)
656
2243
1471408
... More
Bridge work;Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix Macadem specification including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work.(Payment will be made based on level for finished item of work)
443
2509
1111487
... More
Bridge work;Providing and aplying Prime coat with bitumen emulsion (Slow setting /bulk) using emulsion pressure distributor on prepared surface of Granular base including cleaning of road surface and spraying emulsion at the rate of 0.70 Kg/sqm using emulsion pressure distributor for finished item of work as per MoRT&H specification 502 (5th Revision) and as directed by the Engineer - in charge.
1699
36
61674
... More
Bridge work;Providing and applying tack coat with bitumen VG-10 bitumen using pressure distributor at the rate of 0.2Kgs per sqm on the prepared bituminous/granular surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
1699
12
20728
... More
Bridge work;Providing and laying 30 mm thick compacted Bituminous Concrete with 100-120 TPH Batch mix plant using HBG crushed aggregates of Grading ? 3 as per table 500-7 of specification 507 of MoRT&H (5th revision), premixed with bitumen VG-30 grade @ 5.4% of mix and filler, including cost and conveyance of all materials to work site and transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
51
10233
521883
... More
Bridge work;Earth work excavation for foundation of structures as per Drawings and technical specifications,incuding settting out, construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and back filling with approved material as per MoRT&H Spn. 304 (5th revision) and as directed by the Engineer-in-Charge a) Above LWL excluding dewatering charges in ordinary soils upto SDR, by mechanical means upto 3M depth
419
144
60336
... More
Bridge work;Earth work excavation for foundation of structures as per Drawings and technical specifications,incuding settting out, construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and back filling with approved material as per MoRT&H Spn. 304 (5th revision) and as directed by the Engineer-in-Charge b) Above LWL excluding dewatering charges in ordinary rock by mechanical means upto 3M depth
354
183
64782
... More
Bridge work;Plain Cement Concrete (1:3:6) nominal Mix in foundation with crushed stone aggregate 40 mm nominal sizemechanically mixed placed in foundation and compacted by vibration complete as per drawings and technical specifications & as per MoRT&H Spcn. No 2100
22
5741
126302
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Foundations using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision)for footings of abutmentsPiers, cut-off walls and Wing walls below sill Level
283
5789
1638287
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Substructure using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision) for sub structureof abutments and Wing walls below sill Level upto 5.0m Height
228
6123
1396044
... More
Bridge work;Vibrated Reinforced Cement Concrete M25 Mix in sub structure using 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700 & 2200 (5th revision)for Abutmnet bed blocks & backing walls, pier bed blocks sub structure upto 5.0m Height
14
6645
93030
... More
Bridge work;V.R.C.C concrete M -30 grade for Super Structure with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 (5th revision)as per MOST Drg. No: SD/114 upto 5.0m Height
213
7292
1553196
... More
Bridge work;Reinforced Cement Concrete M30 for Approach Slab with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 &2704(5th revision)as directed by Engineer-in-Chrge for approach slab
29
6185
179365
... More
Bridge work;V.R.C.C. M30 grade concrete with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming to table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawing BD/1-69A and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 &2702(5th revision)as directed by Engineer-in-Charge for wearing coat over deck slab
23
6190
142370
... More
Bridge work;Plain Vibrated Cement Concrete M15 Mix using 40mm HBG (SS5) graded M/C metal including cost and conveyance of all materials , centering, machine mixing, laying,vibrating, finishing curing including hire and operational charges of all T&P etc., and including island formation and diversion of flow of water, if necessary etc., complete for Levelling course below approach slab as per drawings and technical specifications & as per MoRT&H Spcn. No 2700.
8
5566
44528
... More
Bridge work;Vibrated Reinforced cement concrete in super structure complete as per darwing and techincal specifications as per MORT&H specification nos 1500,1700 & 2200 VRCC M-40 for Crash barriers excluding cost of steel and its fabrication charges as per approved drawing.
20
7110
142200
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Foundation
3
86228
258684
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Sub structure
4
86558
346232
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Super structure
21
88842
1865682
... More
Bridge work;Providing Grouted Revetment with rough stone (HBG) of not less than 300 mm size grouted with 0.20 cum of CC (1:4:8) including cost, seigniorage charges and conveyance of materials to site and including labour charges for packing the stones for revetment etc., complete for finished item of work as per MoRT&H specification 2504 ( 5th revision ) and as directed by the Engineer-in-Charge for quadrantial revetment.
36
2843
102348
... More
Bridge work;Pitching with 300 mm size rough stone including cost, and conveyance of materials to site and including labour charges for packing the stones for revetment etc., complete for finished item of work as per MoRT&H specification 2504 ( 5th revision ) and as directed by the Engineer-in-Charge for Pitching of slopes for Toe wall.
13
1903
24739
... More
Bridge work;Providing and laying filter material with selected earth underneath pitching in slopes including cost, and conveyance of materials to site including labour charges etc., complete for finished item of work as per MoRT&H Specification 2504 (5th Revision) and as directed by the Engineer-in-Charge under Revetment.
18
368
6624
... More
Bridge work;Back filling behind Abutments with selected earth including cost ,conveyance and of all materials to site etc., complete as per Clause 710.1.4 of IRC : 78and as per MoRT&H Specification No. 2200 (5th Revision) and as per Drawing and technical specifications for finished item of work
121
368
44528
... More
Bridge work;Providing filter media with granular material/ crushed stone aggregates satisfying the requirements laid down in clause 2504.2.2 of MORT&H (Rev. V) specifications to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards wall and provided over the entire surface, behind abutment, and return wall to the full height and compacted to a firm condition complete as per drawing and technical specifications as per MORT&H Spcn. No. 2200 and as per Clause No of 710.1.4 of IRC 78 .
105
2165
227325
... More
Bridge work;Providing weep holes in Brick masonry/Plain/Reinforced concrete Abutment/wing wall/Return wall with 100mm dia meter A/C pipe extending through the full width of the structure with slope of about 1 V : 20H towards drawing face Complete as per drawing and technical specification, complete for finished item of work for weep holes as per MORTH specification No 2706 & 2200 (5th Revision)
147
456
67032
... More
Bridge work;Supplying and fixing of C I drainage spouts complete as per MOT Drg No SD/
4
1444
5776
... More
Bridge work;Providing 25.4 mm mastic pads for longitudinal joints, Transverse expansion joints and construction joints of approved quality including cost of conveyance and placing in position etc., as directed by the engineer in charge
59
1186
69974
... More
Bridge work;Forming embankment with borrowed useful earth (Selected earth with a lead of 10.0km) from outside road boundary by mechanical means upto SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (5th revision) (Payment will be made based on level for finished item of work). For Shoulder only
3368
378
1273104
... More
Bridge work;Construction of Granular sub-base by providing HBG material confirming to Grading - VI of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge. (Payment will be made based on level for finished item of work)
464
2243
1040752
... More
Bridge work;Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix Macadem specification including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work.(Payment will be made based on level for finished item of work)
314
2509
787826
... More
Bridge work;Providing and aplying Prime coat with bitumen emulsion (Slow setting /bulk) using emulsion pressure distributor on prepared surface of Granular base including cleaning of road surface and spraying emulsion at the rate of 0.70 Kg/sqm using emulsion pressure distributor for finished item of work as per MoRT&H specification 502 (5th Revision) and as directed by the Engineer - in charge.
1201
36
43596
... More
Bridge work;Providing and applying tack coat with bitumen VG-10 bitumen using pressure distributor at the rate of 0.2Kgs per sqm on the prepared bituminous/granular surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
1201
12
14652
... More
Bridge work;Providing and laying 30 mm thick compacted Bituminous Concrete with 100-120 TPH Batch mix plant using HBG crushed aggregates of Grading ? 3 as per table 500-7 of specification 507 of MoRT&H (5th revision), premixed with bitumen VG-30 grade @ 5.4% of mix and filler, including cost and conveyance of all materials to work site and transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
37
10233
378621
... More
Bridge work;Earth work excavation for foundation of structures as per Drawings and technical specifications,incuding settting out, construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and back filling with approved material as per MoRT&H Spn. 304 (5th revision) and as directed by the Engineer-in-Charge a) Above LWL excluding dewatering charges in ordinary soils upto SDR, by mechanical means upto 3M depth
1650
144
237600
... More
Bridge work;Earth work excavation for foundation of structures as per Drawings and technical specifications,incuding settting out, construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and back filling with approved material as per MoRT&H Spn. 304 (5th revision) and as directed by the Engineer-in-Charge a) Above LWL excluding dewatering charges in ordinary soils upto SDR, by mechanical means 3M - 6M depth
902
164
147928
... More
Bridge work;Earth work excavation for foundation of structures as per Drawings and technical specifications,incuding settting out, construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and back filling with approved material as per MoRT&H Spn. 304 (5th revision) and as directed by the Engineer-in-Charge b) Above LWL excluding dewatering charges in ordinary rock by mechanical means upto 3M depth
969
183
177327
... More
Bridge work;Plain Cement Concrete (1:3:6) nominal Mix in foundation with crushed stone aggregate 40 mm nominal sizemechanically mixed placed in foundation and compacted by vibration complete as per drawings and technical specifications & as per MoRT&H Spcn. No 2100
52
5741
298532
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Foundations using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision)for footings of abutmentsPiers, cut-off walls and Wing walls below sill Level
736
5789
4260704
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Substructure using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision) for sub structure of abutments and Wing walls below sill Level upto 5.0m Height
610
6123
3735030
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Substructure using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision) for sub structure of abutments and Wing walls below sill Level 5.0m - 10.0m Height
80
6346
507680
... More
Bridge work;Vibrated Reinforced Cement Concrete M25 Mix in sub structure using 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700 & 2200 (5th revision)for Abutmnet bed blocks & backing walls, pier bed blocks sub structure upto 5.0m Height
13
6645
86385
... More
Bridge work;Vibrated Reinforced Cement Concrete M25 Mix in sub structure using 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700 & 2200 (5th revision)for Abutmnet bed blocks & backing walls, pier bed blocks sub structure 5.0m - 10.0m Height
23
6862
157826
... More
Bridge work;V.R.C.C concrete M -30 grade for Super Structure with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 (5th revision)as per MOST Drg. No: SD/114 upto 5.0m Height
119
7292
867748
... More
Bridge work;V.R.C.C concrete M -30 grade for Super Structure with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 (5th revision)as per MOST Drg. No: SD/114 5.0m - 10.0m Height
712
7596
5408352
... More
Bridge work;Reinforced Cement Concrete M30 for Approach Slab with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 &2704(5th revision)as directed by Engineer-in-Chrge for approach slab
29
6185
179365
... More
Bridge work;V.R.C.C. M30 grade concrete with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming to table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawing BD/1-69A and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 &2702(5th revision)as directed by Engineer-in-Charge for wearing coat over deck slab
70
6190
433300
... More
Bridge work;Plain Vibrated Cement Concrete M15 Mix using 40mm HBG (SS5) graded M/C metal including cost and conveyance of all materials , centering, machine mixing, laying,vibrating, finishing curing including hire and operational charges of all T&P etc., and including island formation and diversion of flow of water, if necessary etc., complete for Levelling course below approach slab as per drawings and technical specifications & as per MoRT&H Spcn. No 2700.
8
5566
44528
... More
Bridge work;Vibrated Reinforced cement concrete in super structure complete as per darwing and techincal specifications as per MORT&H specification nos 1500,1700 & 2200 VRCC M-40 for Crash barriers excluding cost of steel and its fabrication charges as per approved drawing.
58
7110
412380
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Foundation
7
86228
603596
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Sub structure
12
86558
1038696
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Super structure
79
88842
7018518
... More
Bridge work;Providing Grouted Revetment with rough stone (HBG) of not less than 300 mm size grouted with 0.20 cum of CC (1:4:8) including cost, seigniorage charges and conveyance of materials to site and including labour charges for packing the stones for revetment etc., complete for finished item of work as per MoRT&H specification 2504 ( 5th revision ) and as directed by the Engineer-in-Charge for quadrantial revetment.
45
2843
127935
... More
Bridge work;Pitching with 300 mm size rough stone including cost, and conveyance of materials to site and including labour charges for packing the stones for revetment etc., complete for finished item of work as per MoRT&H specification 2504 ( 5th revision ) and as directed by the Engineer-in-Charge for Pitching of slopes for Toe wall.
14
1903
26642
... More
Bridge work;Providing and laying filter material with selected earth underneath pitching in slopes including cost, and conveyance of materials to site including labour charges etc., complete for finished item of work as per MoRT&H Specification 2504 (5th Revision) and as directed by the Engineer-in-Charge under Revetment.
23
368
8464
... More
Bridge work;Back filling behind Abutments with selected earth including cost ,conveyance and of all materials to site etc., complete as per Clause 710.1.4 of IRC : 78and as per MoRT&H Specification No. 2200 (5th Revision) and as per Drawing and technical specifications for finished item of work
165
368
60720
... More
Bridge work;Providing filter media with granular material/ crushed stone aggregates satisfying the requirements laid down in clause 2504.2.2 of MORT&H (Rev. V) specifications to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards wall and provided over the entire surface, behind abutment, and return wall to the full height and compacted to a firm condition complete as per drawing and technical specifications as per MORT&H Spcn. No. 2200 and as per Clause No of 710.1.4 of IRC 78 .
129
2165
279285
... More
Bridge work;Providing weep holes in Brick masonry/Plain/Reinforced concrete Abutment/wing wall/Return wall with 100mm dia meter A/C pipe extending through the full width of the structure with slope of about 1 V : 20H towards drawing face Complete as per drawing and technical specification, complete for finished item of work for weep holes as per MORTH specification No 2706 & 2200 (5th Revision)
172
456
78432
... More
Bridge work;Supplying and fixing of C I drainage spouts complete as per MOT Drg No SD/
14
1444
20216
... More
Bridge work;Providing 25.4 mm mastic pads for longitudinal joints, Transverse expansion joints and construction joints of approved quality including cost of conveyance and placing in position etc., as directed by the engineer in charge
125
1186
148250
... More
Bridge work;Forming embankment with borrowed useful earth (Selected earth with a lead of 10.0km) from outside road boundary by mechanical means upto SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (5th revision) (Payment will be made based on level for finished item of work). For Shoulder only
2599
378
982422
... More
Bridge work;Construction of Granular sub-base by providing HBG material confirming to Grading - VI of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge. (Payment will be made based on level for finished item of work)
313
2243
702059
... More
Bridge work;Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix Macadem specification including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work.(Payment will be made based on level for finished item of work)
211
2509
529399
... More
Bridge work;Providing and aplying Prime coat with bitumen emulsion (Slow setting /bulk) using emulsion pressure distributor on prepared surface of Granular base including cleaning of road surface and spraying emulsion at the rate of 0.70 Kg/sqm using emulsion pressure distributor for finished item of work as per MoRT&H specification 502 (5th Revision) and as directed by the Engineer - in charge.
809
36
29367
... More
Bridge work;Providing and applying tack coat with bitumen VG-10 bitumen using pressure distributor at the rate of 0.2Kgs per sqm on the prepared bituminous/granular surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
809
12
9870
... More
Bridge work;Providing and laying 30 mm thick compacted Bituminous Concrete with 100-120 TPH Batch mix plant using HBG crushed aggregates of Grading ? 3 as per table 500-7 of specification 507 of MoRT&H (5th revision), premixed with bitumen VG-30 grade @ 5.4% of mix and filler, including cost and conveyance of all materials to work site and transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
25
10233
255825
... More
Bridge work;Earth work excavation for foundation of structures as per Drawings and technical specifications,incuding settting out, construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and back filling with approved material as per MoRT&H Spn. 304 (5th revision) and as directed by the Engineer-in-Charge a) Above LWL excluding dewatering charges in ordinary soils upto SDR, by mechanical means upto 3M depth
1298
144
186912
... More
Bridge work;Earth work excavation for foundation of structures as per Drawings and technical specifications,incuding settting out, construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and back filling with approved material as per MoRT&H Spn. 304 (5th revision) and as directed by the Engineer-in-Charge b) Above LWL excluding dewatering charges in ordinary rock by mechanical means upto 3M depth
875
183
160125
... More
Bridge work;Plain Cement Concrete (1:3:6) nominal Mix in foundation with crushed stone aggregate 40 mm nominal sizemechanically mixed placed in foundation and compacted by vibration complete as per drawings and technical specifications & as per MoRT&H Spcn. No 2100
47
5741
269827
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Foundations using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision)for footings of abutmentsPiers, cut-off walls and Wing walls below sill Level
490
5789
2836610
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Substructure using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision) for sub structure of abutments and Wing walls below sill Level upto 5.0m Height
614
6123
3759522
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Substructure using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision) for sub structure of abutments and Wing walls below sill Level 5.0m - 10.0m Height
30
6346
190380
... More
Bridge work;Vibrated Reinforced Cement Concrete M25 Mix in sub structure using 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700 & 2200 (5th revision)for Abutmnet bed blocks & backing walls, pier bed blocks sub structure upto 5.0m Height
10
6645
66450
... More
Bridge work;Vibrated Reinforced Cement Concrete M25 Mix in sub structure using 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700 & 2200 (5th revision)for Abutmnet bed blocks & backing walls, pier bed blocks sub structure 5.0m - 10.0m Height
29
6862
198998
... More
Bridge work;V.R.C.C concrete M -30 grade for Super Structure with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 (5th revision)as per MOST Drg. No: SD/114 5.0m - 10.0m Height
958
7596
7276968
... More
Bridge work;Reinforced Cement Concrete M30 for Approach Slab with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 &2704(5th revision)as directed by Engineer-in-Chrge for approach slab
29
6185
179365
... More
Bridge work;V.R.C.C. M30 grade concrete with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming to table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawing BD/1-69A and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 &2702(5th revision)as directed by Engineer-in-Charge for wearing coat over deck slab
83
6190
513770
... More
Bridge work;Plain Vibrated Cement Concrete M15 Mix using 40mm HBG (SS5) graded M/C metal including cost and conveyance of all materials , centering, machine mixing, laying,vibrating, finishing curing including hire and operational charges of all T&P etc., and including island formation and diversion of flow of water, if necessary etc., complete for Levelling course below approach slab as per drawings and technical specifications & as per MoRT&H Spcn. No 2700.
8
5566
44528
... More
Bridge work;Vibrated Reinforced cement concrete in super structure complete as per darwing and techincal specifications as per MORT&H specification nos 1500,1700 & 2200 VRCC M-40 for Crash barriers excluding cost of steel and its fabrication charges as per approved drawing.
69
7110
490590
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Foundation
6
86228
517368
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Sub structure
12
86558
1038696
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Super structure
79
88842
7018518
... More
Bridge work;Providing Grouted Revetment with rough stone (HBG) of not less than 300 mm size grouted with 0.20 cum of CC (1:4:8) including cost, seigniorage charges and conveyance of materials to site and including labour charges for packing the stones for revetment etc., complete for finished item of work as per MoRT&H specification 2504 ( 5th revision ) and as directed by the Engineer-in-Charge for quadrantial revetment.
37
2843
105191
... More
Bridge work;Pitching with 300 mm size rough stone including cost, and conveyance of materials to site and including labour charges for packing the stones for revetment etc., complete for finished item of work as per MoRT&H specification 2504 ( 5th revision ) and as directed by the Engineer-in-Charge for Pitching of slopes for Toe wall.
13
1903
24739
... More
Bridge work;Providing and laying filter material with selected earth underneath pitching in slopes including cost, and conveyance of materials to site including labour charges etc., complete for finished item of work as per MoRT&H Specification 2504 (5th Revision) and as directed by the Engineer-in-Charge under Revetment.
19
368
6992
... More
Bridge work;Back filling behind Abutments with selected earth including cost ,conveyance and of all materials to site etc., complete as per Clause 710.1.4 of IRC : 78and as per MoRT&H Specification No. 2200 (5th Revision) and as per Drawing and technical specifications for finished item of work
123
368
45264
... More
Bridge work;Providing filter media with granular material/ crushed stone aggregates satisfying the requirements laid down in clause 2504.2.2 of MORT&H (Rev. V) specifications to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards wall and provided over the entire surface, behind abutment, and return wall to the full height and compacted to a firm condition complete as per drawing and technical specifications as per MORT&H Spcn. No. 2200 and as per Clause No of 710.1.4 of IRC 78 .
113
2165
244645
... More
Bridge work;Providing weep holes in Brick masonry/Plain/Reinforced concrete Abutment/wing wall/Return wall with 100mm dia meter A/C pipe extending through the full width of the structure with slope of about 1 V : 20H towards drawing face Complete as per drawing and technical specification, complete for finished item of work for weep holes as per MORTH specification No 2706 & 2200 (5th Revision)
148
456
67488
... More
Bridge work;Supplying and fixing of C I drainage spouts complete as per MOT Drg No SD/
18
1444
25992
... More
Bridge work;Providing 25.4 mm mastic pads for longitudinal joints, Transverse expansion joints and construction joints of approved quality including cost of conveyance and placing in position etc., as directed by the engineer in charge
145
1186
171970
... More
Bridge work;Forming embankment with borrowed useful earth (Selected earth with a lead of 10.0km) from outside road boundary by mechanical means upto SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (5th revision) (Payment will be made based on level for finished item of work). For Shoulder only
5617
378
2123226
... More
Bridge work;Construction of Granular sub-base by providing HBG material confirming to Grading - VI of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge. (Payment will be made based on level for finished item of work)
671
2243
1505053
... More
Bridge work;Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix Macadem specification including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work.(Payment will be made based on level for finished item of work)
453
2509
1136577
... More
Bridge work;Providing and aplying Prime coat with bitumen emulsion (Slow setting /bulk) using emulsion pressure distributor on prepared surface of Granular base including cleaning of road surface and spraying emulsion at the rate of 0.70 Kg/sqm using emulsion pressure distributor for finished item of work as per MoRT&H specification 502 (5th Revision) and as directed by the Engineer - in charge.
1736
36
63017
... More
Bridge work;Providing and applying tack coat with bitumen VG-10 bitumen using pressure distributor at the rate of 0.2Kgs per sqm on the prepared bituminous/granular surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
1736
12
21179
... More
Bridge work;Providing and laying 30 mm thick compacted Bituminous Concrete with 100-120 TPH Batch mix plant using HBG crushed aggregates of Grading ? 3 as per table 500-7 of specification 507 of MoRT&H (5th revision), premixed with bitumen VG-30 grade @ 5.4% of mix and filler, including cost and conveyance of all materials to work site and transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
53
10233
542349
... More
Bridge work;Earth work excavation for foundation of structures as per Drawings and technical specifications,incuding settting out, construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and back filling with approved material as per MoRT&H Spn. 304 (5th revision) and as directed by the Engineer-in-Charge a) Above LWL excluding dewatering charges in ordinary soils upto SDR, by mechanical means upto 3M depth
267
144
38448
... More
Bridge work;Earth work excavation for foundation of structures as per Drawings and technical specifications,incuding settting out, construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and back filling with approved material as per MoRT&H Spn. 304 (5th revision) and as directed by the Engineer-in-Charge b) Above LWL excluding dewatering charges in ordinary rock by mechanical means upto 3M depth
283
183
51789
... More
Bridge work;Plain Cement Concrete (1:3:6) nominal Mix in foundation with crushed stone aggregate 40 mm nominal sizemechanically mixed placed in foundation and compacted by vibration complete as per drawings and technical specifications & as per MoRT&H Spcn. No 2100
19
5741
109079
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Foundations using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision)for footings of abutmentsPiers, cut-off walls and Wing walls below sill Level
264
5789
1528296
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Substructure using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision) for sub structure of abutments and Wing walls below sill Level upto 5.0m Height
234
6123
1432782
... More
Bridge work;Vibrated Reinforced Cement Concrete M25 Mix in sub structure using 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700 & 2200 (5th revision)for Abutmnet bed blocks & backing walls, pier bed blocks sub structure upto 5.0m Height
10
6645
66450
... More
Bridge work;V.R.C.C concrete M -30 grade for Super Structure with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 (5th revision)as per MOST Drg. No: SD/114 5.0m -10.0m Height
107
7596
812772
... More
Bridge work;Reinforced Cement Concrete M30 for Approach Slab with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 &2704(5th revision)as directed by Engineer-in-Chrge for approach slab
29
6185
179365
... More
Bridge work;V.R.C.C. M30 grade concrete with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming to table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawing BD/1-69A and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 &2702(5th revision)as directed by Engineer-in-Charge for wearing coat over deck slab
15
6190
92850
... More
Bridge work;Plain Vibrated Cement Concrete M15 Mix using 40mm HBG (SS5) graded M/C metal including cost and conveyance of all materials , centering, machine mixing, laying,vibrating, finishing curing including hire and operational charges of all T&P etc., and including island formation and diversion of flow of water, if necessary etc., complete for Levelling course below approach slab as per drawings and technical specifications & as per MoRT&H Spcn. No 2700.
8
5566
44528
... More
Bridge work;Vibrated Reinforced cement concrete in super structure complete as per darwing and techincal specifications as per MORT&H specification nos 1500,1700 & 2200 VRCC M-40 for Crash barriers excluding cost of steel and its fabrication charges as per approved drawing.
13
7110
92430
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Foundation
3
86228
258684
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Sub structure
4
86558
346232
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Super structure
12
88842
1066104
... More
Bridge work;Providing Grouted Revetment with rough stone (HBG) of not less than 300 mm size grouted with 0.20 cum of CC (1:4:8) including cost, seigniorage charges and conveyance of materials to site and including labour charges for packing the stones for revetment etc., complete for finished item of work as per MoRT&H specification 2504 ( 5th revision ) and as directed by the Engineer-in-Charge for quadrantial revetment.
49
2843
139307
... More
Bridge work;Pitching with 300 mm size rough stone including cost, and conveyance of materials to site and including labour charges for packing the stones for revetment etc., complete for finished item of work as per MoRT&H specification 2504 ( 5th revision ) and as directed by the Engineer-in-Charge for Pitching of slopes for Toe wall.
15
1903
28545
... More
Bridge work;Providing and laying filter material with selected earth underneath pitching in slopes including cost, and conveyance of materials to site including labour charges etc., complete for finished item of work as per MoRT&H Specification 2504 (5th Revision) and as directed by the Engineer-in-Charge under Revetment.
25
368
9200
... More
Bridge work;Back filling behind Abutments with selected earth including cost ,conveyance and of all materials to site etc., complete as per Clause 710.1.4 of IRC : 78and as per MoRT&H Specification No. 2200 (5th Revision) and as per Drawing and technical specifications for finished item of work
169
368
62192
... More
Bridge work;Providing filter media with granular material/ crushed stone aggregates satisfying the requirements laid down in clause 2504.2.2 of MORT&H (Rev. V) specifications to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards wall and provided over the entire surface, behind abutment, and return wall to the full height and compacted to a firm condition complete as per drawing and technical specifications as per MORT&H Spcn. No. 2200 and as per Clause No of 710.1.4 of IRC 78 .
123
2165
266295
... More
Bridge work;Providing weep holes in Brick masonry/Plain/Reinforced concrete Abutment/wing wall/Return wall with 100mm dia meter A/C pipe extending through the full width of the structure with slope of about 1 V : 20H towards drawing face Complete as per drawing and technical specification, complete for finished item of work for weep holes as per MORTH specification No 2706 & 2200 (5th Revision)
177
456
80712
... More
Bridge work;Supplying and fixing of C I drainage spouts complete as per MOT Drg No SD/
2
1444
2888
... More
Bridge work;Providing 25.4 mm mastic pads for longitudinal joints, Transverse expansion joints and construction joints of approved quality including cost of conveyance and placing in position etc., as directed by the engineer in charge
51
1186
60486
... More
Bridge work;Forming embankment with borrowed useful earth (Selected earth with a lead of 10.0km) from outside road boundary by mechanical means upto SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (5th revision) (Payment will be made based on level for finished item of work). For Shoulder only
4504
378
1702512
... More
Bridge work;Construction of Granular sub-base by providing HBG material confirming to Grading - VI of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge. (Payment will be made based on level for finished item of work)
493
2243
1105799
... More
Bridge work;Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix Macadem specification including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work.(Payment will be made based on level for finished item of work)
333
2509
835497
... More
Bridge work;Providing and aplying Prime coat with bitumen emulsion (Slow setting /bulk) using emulsion pressure distributor on prepared surface of Granular base including cleaning of road surface and spraying emulsion at the rate of 0.70 Kg/sqm using emulsion pressure distributor for finished item of work as per MoRT&H specification 502 (5th Revision) and as directed by the Engineer - in charge.
1274
36
46246
... More
Bridge work;Providing and applying tack coat with bitumen VG-10 bitumen using pressure distributor at the rate of 0.2Kgs per sqm on the prepared bituminous/granular surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
1274
12
15543
... More
Bridge work;Providing and laying 30 mm thick compacted Bituminous Concrete with 100-120 TPH Batch mix plant using HBG crushed aggregates of Grading ? 3 as per table 500-7 of specification 507 of MoRT&H (5th revision), premixed with bitumen VG-30 grade @ 5.4% of mix and filler, including cost and conveyance of all materials to work site and transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
39
10233
399087
... More
Bridge work;Earth work excavation for foundation of structures as per Drawings and technical specifications,incuding settting out, construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and back filling with approved material as per MoRT&H Spn. 304 (5th revision) and as directed by the Engineer-in-Charge a) Above LWL excluding dewatering charges in ordinary soils upto SDR, by mechanical means upto 3M depth
951
144
136944
... More
Bridge work;Earth work excavation for foundation of structures as per Drawings and technical specifications,incuding settting out, construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and back filling with approved material as per MoRT&H Spn. 304 (5th revision) and as directed by the Engineer-in-Charge b) Above LWL excluding dewatering charges in ordinary rock by mechanical means upto 3M depth
442
183
80886
... More
Bridge work;Plain Cement Concrete (1:3:6) nominal Mix in foundation with crushed stone aggregate 40 mm nominal sizemechanically mixed placed in foundation and compacted by vibration complete as per drawings and technical specifications & as per MoRT&H Spcn. No 2100
29
5741
166489
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Foundations using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision)for footings of abutmentsPiers, cut-off walls and Wing walls below sill Level
403
5789
2332967
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Substructure using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision) for sub structure of abutments and Wing walls below sill Level upto 5.0m Height
450
6123
2755350
... More
Bridge work;Plain Vibrated Cement Concrete M20 Mix in Substructure using 40 mm, 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc. complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700, 2100 (5th revision) for sub structure of abutments and Wing walls below sill Level 5.0m - 10.0m Height
119
6346
755174
... More
Bridge work;Vibrated Reinforced Cement Concrete M25 Mix in sub structure using 20mm and 10mm size HBG (ss5) graded M/c metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1700 & 2200 (5th revision)for Abutmnet bed blocks & backing walls, pier bed blocks sub structure 5.0m - 10.0m Height
13
6862
89206
... More
Bridge work;V.R.C.C concrete M -25 grade for Super Structure with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 (5th revision)as per MOST Drg. No: SD/114 5.0m - 10.0m Height
142
7524
1068408
... More
Bridge work;Reinforced Cement Concrete M30 for Approach Slab with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming ti table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawings and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 &2704(5th revision)as directed by Engineer-in-Chrge for approach slab
29
6185
179365
... More
Bridge work;V.R.C.C. M30 grade concrete with 20 mm & 10mm (SS5)HBG M/C graded metal ( Coasre aggregate confirming to table 1000-1 and fine aggregate confirming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, vibrating, finishing curing including all other incidental cahrges and all other operational charges of all T & P required etc as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item complete as per drawing BD/1-69A and technical specifications & as per MoRT&H Spcn. No 1500, 1600 & 1700 &2702(5th revision)as directed by Engineer-in-Charge for wearing coat over deck slab
20
6190
123800
... More
Bridge work;Plain Vibrated Cement Concrete M15 Mix using 40mm HBG (SS5) graded M/C metal including cost and conveyance of all materials , centering, machine mixing, laying,vibrating, finishing curing including hire and operational charges of all T&P etc., and including island formation and diversion of flow of water, if necessary etc., complete for Levelling course below approach slab as per drawings and technical specifications & as per MoRT&H Spcn. No 2700.
8
5566
44528
... More
Bridge work;Vibrated Reinforced cement concrete in super structure complete as per darwing and techincal specifications as per MORT&H specification nos 1500,1700 & 2200 VRCC M-40 for Crash barriers excluding cost of steel and its fabrication charges as per approved drawing.
20
7110
142200
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Foundation
4
86228
344912
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Sub structure
6
86558
519348
... More
Bridge work;Providing HYSD bars (Fe-500)from primary producers like TATA, SAIL VSP, JSW & Shyam as approved by Ministry of Steel of different diameters , wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinfircemnet including cutting, bending, bi nding roads, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and opertaional charges etc., including over lapping, welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-in-Chrage and as per MoRT&H spn. 1600&2200 (5th revision) and as per I.S:1786 of 1985 for Super structure
16
88842
1421472
... More
Bridge work;Providing Grouted Revetment with rough stone (HBG) of not less than 300 mm size grouted with 0.20 cum of CC (1:4:8) including cost, seigniorage charges and conveyance of materials to site and including labour charges for packing the stones for revetment etc., complete for finished item of work as per MoRT&H specification 2504 ( 5th revision ) and as directed by the Engineer-in-Charge for quadrantial revetment.
104
2843
295672
... More
Bridge work;Pitching with 300 mm size rough stone including cost, and conveyance of materials to site and including labour charges for packing the stones for revetment etc., complete for finished item of work as per MoRT&H specification 2504 ( 5th revision ) and as directed by the Engineer-in-Charge for Pitching of slopes for Toe wall.
21
1903
39963
... More
Bridge work;Providing and laying filter material with selected earth underneath pitching in slopes including cost, and conveyance of materials to site including labour charges etc., complete for finished item of work as per MoRT&H Specification 2504 (5th Revision) and as directed by the Engineer-in-Charge under Revetment.
52
368
19136
... More
Bridge work;Back filling behind Abutments with selected earth including cost ,conveyance and of all materials to site etc., complete as per Clause 710.1.4 of IRC : 78and as per MoRT&H Specification No. 2200 (5th Revision) and as per Drawing and technical specifications for finished item of work
386
368
142048
... More
Bridge work;Providing filter media with granular material/ crushed stone aggregates satisfying the requirements laid down in clause 2504.2.2 of MORT&H (Rev. V) specifications to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards wall and provided over the entire surface, behind abutment, and return wall to the full height and compacted to a firm condition complete as per drawing and technical specifications as per MORT&H Spcn. No. 2200 and as per Clause No of 710.1.4 of IRC 78 .
180
2165
389700
... More
Bridge work;Providing weep holes in Brick masonry/Plain/Reinforced concrete Abutment/wing wall/Return wall with 100mm dia meter A/C pipe extending through the full width of the structure with slope of about 1 V : 20H towards drawing face Complete as per drawing and technical specification, complete for finished item of work for weep holes as per MORTH specification No 2706 & 2200 (5th Revision)
384
456
175104
... More
Bridge work;Supplying and fixing of C I drainage spouts complete as per MOT Drg No SD/
4
1444
5776
... More
Bridge work;Providing 25.4 mm mastic pads for longitudinal joints, Transverse expansion joints and construction joints of approved quality including cost of conveyance and placing in position etc., as directed by the engineer in charge
57
1186
67602
... More
Bridge work;Forming embankment with borrowed useful earth (Selected earth with a lead of 10.0km) from outside road boundary by mechanical means upto SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (5th revision) (Payment will be made based on level for finished item of work). For Shoulder only
6405
378
2421090
... More
Bridge work;Construction of Granular sub-base by providing HBG material confirming to Grading - VI of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge. (Payment will be made based on level for finished item of work)
746
2243
1673278
... More
Bridge work;Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix Macadem specification including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work.(Payment will be made based on level for finished item of work)
503
2509
1262027
... More
Bridge work;Providing and aplying Prime coat with bitumen emulsion (Slow setting /bulk) using emulsion pressure distributor on prepared surface of Granular base including cleaning of road surface and spraying emulsion at the rate of 0.70 Kg/sqm using emulsion pressure distributor for finished item of work as per MoRT&H specification 502 (5th Revision) and as directed by the Engineer - in charge.
1929
36
70023
... More
Bridge work;Providing and applying tack coat with bitumen VG-10 bitumen using pressure distributor at the rate of 0.2Kgs per sqm on the prepared bituminous/granular surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
1929
12
23534
... More
Bridge work;Providing and laying 30 mm thick compacted Bituminous Concrete with 100-120 TPH Batch mix plant using HBG crushed aggregates of Grading ? 3 as per table 500-7 of specification 507 of MoRT&H (5th revision), premixed with bitumen VG-30 grade @ 5.4% of mix and filler, including cost and conveyance of all materials to work site and transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
58
10233
593514
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%