Roads And Buildings Department Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Roads And Buildings Department Tender
Civil And Construction
Building Construction
Opening Date25 Jan 2025
Closing Date29 Jan 2025
Tender Amount₹ 27,11,728
Costs
EMD
₹ 27,117Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
571867Tender No
NIT No. 70/E.E(R&B)/CBD/DB/HD/e-proc/24-25/ Date: 24.01.2025Tender Authority
Roads And Buildings Department ViewPurchaser Address
-Website
http://http://www.rnbgujarat.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Others;Supply & fixing of Floor Trap (Bell Mouth ) 110 mm - UPVC/SWR Pipe fittings Complete for finished item of work
3
269
807
... More
Others;Supply & fixing of 110 x 75 mm dia - Reducer - UPVC/SWR Pipe fittings Complete for finished item of work
1
69
69
... More
Others;Supply & fixing of 75 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings Complete for finished item of work
1
47
47
... More
Others;Supply & fixing of 110 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings Complete for finished item of work
1
154
154
... More
Others;Supply & fixing of 110 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings Complete for finished item of work
1
84
84
... More
Others;Supply & fixing of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings Complete for finished item of work
1
100
100
... More
Others;Supply & fixing of 110 mm dia - Single 'Y' - UPVC/SWR Pipe fittings complete for finished item of work
1
162
162
... More
Others;Supply and delivery of 75 mm dia 3 M Single Socket PVC/SWR pipe - 6 Kg/sq.cm including cost of pipe, overhead charges and contractor profit etc., complete for finished item of work as directed by Engineer-incharge
3
169
508.98
... More
Others;Supply and delivery of 110 mm dia 3 M Single Socket PVC/ SWR pipe -6 Kg/sq.cm including cost of pipe, overhead charges and contractor profit etc., complete for finished item of work as directed by Engineer-incharge
4
324
1296
... More
Others;S&F premium make CPVC Pipes of 22.20mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental , labour charges, etc. complete for finished item of work as directed by Engineer-incharge
30
303
9090
... More
Others;S&F premium make CPVC Pipes of 28.60mm OD Pipe - SDR 11 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental , labour charges, etc.complete for finished item of work as directed by Engineer-in-charge
70
410
28700
... More
Others;Supply & Fixing of 25mm PPR Union conforming to DIN Standards 8077/8092 Complete for finished item of work
6
129
774
... More
Others;Supply & fixing of 25mm x ¾? PPR Male Threaded Adaptor conforming to DIN Standards 8077/8092 Complete for finished item of work
10
283
2830
... More
Others;Supply & Fixing of PPR ball valve conforming to DIN Standards 8077/8092 Complete for finished item of work
15
267
4005
... More
Others;Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and overflow pipes but without fittings & base support for tanks TBSP-H.II-01
2000
10
20000
... More
Others;labour charges for Removing of old and damaged water storage tank etc complite. Sor 2011-12.
4000
-
1760
... More
Others;S & F 609.6 mm long 127 mm wide plate glass shelf with superior quality aluminium railing complete with aluminium screws. Complete for finished item of work
2
233
466
... More
Others;Supply of 25mm x ½? PPR Female Threaded Adaptor conforming to DIN Standards 8077/8092 Complete for finished item of work
5
126
630
... More
Others;Supplying & Fixing 15 mm nominal size PVC connection with brass union nut C.P coated Complete for finished item of work
5
124
620
... More
Others;Supplying and fixing of one piece closet, Hindware / Jaquar , Italian make collection EWC of KAHTY model Cat No. (S-30) Star white colour of size 73x32 CM complete as pe standard pratic for finished item etc complete. Approved in QTR NO 11. Agreement Bound No:- 57 /23-24. Dt. 6.10.23. SE (R&B)HQC No:- 10/2023-24 Dt.22.09.2023. T R&B (Bldgs). GORT No:- 414 Dt.21.8.23. Approved Rate in Minister Qtr No. 9 vide Agreement Bound NO: - 10/24-25. Ref to Sanction No:- 6/24-25.
1
23600
23600
... More
Others;S&F Stainless steel 4" dia round Grating with frame for nahany or floor trap cover with or without hole Complete for finished item of work
3
71
213
... More
Others;S&F CP finish brass soap dish Complete for finished item of work
1
623
623
... More
Others;S&F Stainless steel liquid soap container wall mounted and bottle type Complete for finished item of work
1
496
496
... More
Others;S&F of Chromium plated finish stainless steel body towel rail 24'' with 10 years warrant Complete for finished item of work
1
1778
1778
... More
Others;S&F CP finish brass wall mounted towel ring Complete for finished item of work
1
677
677
... More
Others;S&F CP finish steel towel rod of 600 mm long and 20 mm dia with brackets Complete for finished item of work
1
437
437
... More
Others;S&F 15 mm nominal size 5 flow hand shower with rabbit cleaning system and 1.5 m long flexible hose and wall hook. Complete for finished item of work
1
1973
1973
... More
Others;S&F of 15 mm brass forged body concealed diverter with high flow Complete for finished item of work
1
4805
4805
... More
Others;S&F of 15 mm brass body Premium variety Chromium plated finish long neck pillar cock with aerator of not less than 500 grams weight quarter turn spindle conforming to IS 8931 and with a warranty of 10 years Complete for finished item of work
1
1207
1207
... More
Others;S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty Complete for finished item of work
1
3524
3524
... More
Others;S&F of 15 mm brass body premium variety Chromium Plated finish bib tap angular shape with wall flange of not less than 500 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931 and with 10 years warranty Complete for finished item of work
2
1315
2630
... More
Others;Supplying and Fixing Pedestal for Wash Hand Basin Complete for finished item of work
1
1588
1588
... More
Others;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ standard CI brackets including wooden block: 630 x 450 mm - Single C.P. Pillar cock Complete for finished item of work
1
2893
2893
... More
Others;Supply & Fixing 40 mm nominal size dia PVC solid waste pipe outlet Complete for finished item of work
1
108
108
... More
Others;Supplying and fixing Rectangular Mirror Frameless of size 457 .2 mm x 609.6 mm Complete for finished item of work
1
1619
1619
... More
Others;S&F of 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 Complete for finished item of work
5
669
3345
... More
Others;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).2nd (F3)
54.5
683
37224.59
... More
Others;Supplying and fixing of Unplasticized Poly VinylChloride (UPVC) 3 track sliding windows withmesh shutter ? (2-glass shutters and 1-meshshutter) duly manufactured using UPVCreinforced profiles (Composition of profile shallconsists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts ofPVC resin) of (94 mm x 45 mm)/(80 mm x 52 mm)x 2.20 mm for outer frames, (58 mm x 39mm)/(54 mm x 38 mm) x 2.20 mm for slidingshutter frames capable of mounting single glazingsystem structurally reinforced with hot dipgalvanized up to 50 microns of minimumthickness of 1.0/1.2 mm prefabricated & weldedthrough fusion welding. The window sash shall befitted with 5 mm thick clear float glass ofreputed make and mesh shutter frame shall be(42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mmfitted with Vinyl Coated Fibre mesh- on rollers/pulley duly fixed with Grey colour TPV Gasket forsash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have singlepoint locking with Touch Lock and the system isto be installed at the site using anchor fasteners,silicon rubber sealant, easy glazing/ deglazing atsite etc., including cost and conveyance of all materials, accessories, labour charges fortransportation, erection at site complete forfinished item of work. TBSC-M.II-11
10.95
7119
77953.05
... More
Others;Providing, supplying & fixing of Fixed Louvered Ventilator made from multi chambered uPVC sections with Glazing bead shall be co-extrudedwith Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Ironprofiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x2.40 mm with reinforcement of 1 mm thickness.(Composition of profile shall consists of aminimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mmPin Head glass, standard hardware. Wallthickness of frame & Mullion shall be 2.4 mm.,including cost and conveyance of all materials,accessories, labour charges for transportation,erection at site complete for finished item ofwork. TBSC-M.III-07
0.45
6407
2883.15
... More
Others;Flooring with digital / polished glazed full bodyporcelain vitrified tiles with any type of designtexture such as marble finish, wooden, bamboo,stone finishes etc., scratch less, stain free and of size 1200 x 600 mm and thickness between 12-15mm 1st quality conforming to IS:15622 - 2017,IS:13630 (Parts 1 to 15) of any colour and finish inall shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)
51.6
1525
78725.6
... More
Others;Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats.
230
276
63517.35
... More
Others;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer.
153.23
153
23506.1
... More
Others;Supply and fixing of Teak wood frame Frame along with Flush door shutters along with solid wood lock board type in green ply/ equivalent, fixing both sides with 1mm laminate of approved shade (greenlam /equivalent) with necessary hinges(say 4nos) with heavy duty door closer(godrej), and 6/7 lever mortise handle (godrej) with locking system etc., to finsh as per directoins if Engineer in charge.
3.88
9186
35598.97
... More
Others;Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame,Supplying and fixing of 24/26 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fiber), and the remaining 15% additives, comprising of virgin PVC,MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA TBSC-P.IX-08, Stainless Steel Aldrops (IS:15834) 300 mm long TBSC-P.IV-12, Aluminium Flat Latches: 300 mm long TBSC-P.V-06, Stainless Steel Door Handles 150 mm Long TBSC-P.III-17, Rubber /Nylon door stop bushesbush TBSC-P.IX-04 complete for finished item of work
3.4
4860
16541.85
... More
Others;Dadooing to walls with digital / polished glazed full body porcelain highlighter wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.
15.3
1011
15472.28
... More
Others;Flooring with Supply of Non-skid red or white full body Ceramic floor tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)
4.01
1245
4987.87
... More
Others;Plain Cement Concrete M 20 nominal mix using WEIGH BATCHER / MIXER, 20mm size hard granite machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centering, shuttering, machine mixing, lift charges, laying concrete,vibrating, curing, overheads & contrctors profit etc., complete for finished item of work (APSS No. 402 & 403).
0.38
6115
2342.1
... More
Others;Providing and laying cinder concrete in cement cinder mix (1:15) prop. using 12.5 mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyance of all materials, water to work site, all operational, incidental, labour charges, such as mixing cement & cinder, cost of overheads and contractor's profit etc. complete for finished item of work.
1.15
3708
4260.81
... More
Others;Providing Integral Cement Waterproofing Liquid to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proo fing compound as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).
3.83
582
2231.48
... More
Others;Providing specialized high performance acrylic polymer modified elastomeric cementitious waterproof coating to the terrace / walls / internal portion of the bathroom & toilets / internal portion of the water tanks duly cleaning of the surface from dirt, dust and other contaminations, providing and application of Two coats of High performance Acrylic polymer modified Elastomeric cementitious waterproof coating ( 1.8 Sq. Mtr. / Kg /Each Coat ) complete for finished item of work
8.19
479
3921.57
... More
Others;Providing and applying (two coat component acrylic polymer modified elasto meric waterproofing membrane which consists of Brushbond powder and brushbond liquid acrylic emulsion ) for a minium 2mm thickness coating. Work shall be executed as per manufactures specification and instructions complete for finished item of work
8.19
262
2144.99
... More
Others;do-First floor
228.01
458
104615.09
... More
Others;Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding(with MS Jack Prop Cup lock Pipe Scaffolds) for:-External Putty-Ground floor
50
452
22636.5
... More
Others;Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for internal walls - :-Internal - Providing Putty.
174.37
242
42217.2
... More
Others;Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat, overheads and contractors profit, etc. complete for finished item of work as per Idia Gypsum Ltd specification.
60.59
1135
68788.43
... More
Others;Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS CUPLOCK SCAFFOLD SYSTEM USING MS STEEL PLATE SHUTTERS) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) Ground (F1)
55.59
568
31591.8
... More
Others;do-First floor
50.73
654
33225.91
... More
Others;Plastering 20 mm thick in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves as directed by Engineer - in - charge etc., complete for finished item of work. (SS 901,903 & 904) -Ground floor
111.32
571
63570.4
... More
Others;do-Second floor
46.12
651
30031.96
... More
Others;do-First floor
172.25
598
103007.22
... More
Others;Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS CUPLOCK SCAFFOLD SYSTEM USING MS STEEL PLATE SHUTTERS) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) -Ground floor
50
544
27242.5
... More
Others;do-First floor
56.37
1752
98764.19
... More
Others;Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) SLABS.125mm thick-Ground floor
56.37
1695
95549.97
... More
Others;do-First floor
1.99
14721
29295.29
... More
Others;Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS -Ground floor
1.99
14102
28062.98
... More
Others;do-First floor
1554.94
78
122264.93
... More
Others;Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)-Ground floor
1531.6
77
117963.83
... More
Others;do-Second floor
24.99
9338
233334.01
... More
Others;do-First floor
57.92
8743
506390.28
... More
Others;Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds) , constructing masonry, lift charges, curing, cost of overheads and contractors profit etc., complete for finished item of work. (APSS No. 501 & 504).)-Ground floor
1
7461
7461.63
... More
Others;Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard Granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand (with 50% river sand & 50% manufactured sand), water, stones etc., to site, labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of overheads & contractors profit etc.,complete for finished item of work in foundation and basement. (APSS No. 601 & 615).
13.43
4895
65740.39
... More
Others;Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR Plinth Beam
1.53
11218
17164.58
... More
Others;do-First floor
1.8
16075
28935.74
... More
Others;Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using CUPLOCK SCAFFOLD SYSTEM USING MS STEEL PLATE SHUTTERS, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS-Ground floor
2.28
15086
34396.79
... More
Others;Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR FOOTINGS.
3.93
11218
44089.41
... More
Others;Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No. 402) HAND MIXING
7.2
4881
35147.23
... More
Others;Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Manual Means.
46.66
486
22678.16
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements