Roads And Buildings Department Tender

civil work;Supply and Fixing Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2"x2"(50 mm x 50 mm) - 8Gauge

civil work;Supplying and fixing Mild Steel Tubes & pipes of Brands like JSW, TATA Steel, Sail,JSW etc all Diameters as per IS-1161 as per design and drawings including charges for fabricating and erecting and all incidental charges etc, for finished item of work

civil work;Supplying and fixing Mild Steel Chequred plates as floor of Brands like JSW, TATA Steel, Sail,JSW etc any thickness as per design and drawings including charges for fabricating and erecting and all incidental charges etc, for finished item of work

civil work;Supplying and fixing Mild steel, structural steel. i.e Angles, Channels & I-sections of Brands like JSW, TATA Steel, Sail,JSW etc any thickness as per design and drawings including charges for fabricating and erecting and all incidental charges etc, for finished item of work

civil work;Supplying and fixing Mild Steel plates of Brands like JSW, TATA Steel, Sail,JSW etc any thickness as per design and drawings including charges for fabricating and erecting and all incidental charges etc, for finished item of work

civil work;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

civil work;HIRE CHARGES FOR CENTERING for pedestal

civil work;HIRE CHARGES FOR CENTERING & SCAFFOLDING forfootings pedestal plinth beams columns upto 3.66 m HIRE CHARGES FOR CENTERING for footings

civil work;RCC M- 20 Nominal mix for FOUNDATIONS, PLINTH, PEDESTALS (Below Plinth) (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering.

civil work;Plain Cement Cocrete (1:3:6) using 40mm metal with hand mixing upto plinth level.

civil work;Earth work excavation for and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS 20B (ApSS 308) in Ordinary Soil-Manual Means-Upto 3M depth.

civil work;Demolishing and disposal of unserviceable materials within 100 metres lead -Unreinforced cement concrete upto 15 cm thickness