Public Health And Municipal Engineering Department Tender

Laying of CC Road from Dandugadda Colony to Sri Krishna Temple in Kothakota Municipality, Wanaparthy;RBR-FNDN-4 I(i) : Providing P.C.C grade M 10 concrete using 40 mm nominal size hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Laying of CC Road from Dandugadda Colony to Sri Krishna Temple in Kothakota Municipality, Wanaparthy;RBR-CCPV-5-Construction of M30 grade plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement @ 350 kg per cum or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Laying of CC Road from Dandugadda Colony to Sri Krishna Temple in Kothakota Municipality, Wanaparthy;Vaccum drying of freshly laid cement concrete floor using 100% air tight suction mat of suitable size and length, vaccum pump to maintain vaccum pressure 0.7-0.8 atmospheres as per the standard procedures floating with power floater, mechanically travelling,finishing with sound edges and corners including hire and operational charges of machinery,labour,fuel etc., complete for finished item of work as directed by Engineer-in-charge of the work( As per Quotation ).