Public Health And Municipal Engineering Department Tender

KTK SWD 1Cr;Amendment as per SOR 2021-22: Collection, Supply and filling with HBG stone chips 2.36 mm & below from approved quarry to work site and stacking at work site to Dept. gauge for premeasurements including cost and convenyance of all material and all labour charges etc. complete as per standard specifications. Clause 305.3.9 MORD & 304 MORTH.

KTK SWD 1Cr;RBR-FNDN-4 I(i) :Providing PCC Grade M10 concrete using 20 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

KTK SWD 1Cr;RBR-FNDN-4 :Providing PCC M15 nominal mix using 20 mm size graded HBG crushed metal including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc.,to site labour charges for mixing, laying concrete,raming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work as directed by Engineer-in Charge (for Drain Bottom slab)

KTK SWD 1Cr;RBR-FNDN(E) :RCC M- 25 (Design Mix):Providing concrete for plain/reinforced concrete in open foundations using 20 mm Graded Metal (MORD & MORTH 12.8 E) hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

KTK SWD 1Cr;RBR-FNDN-4 :Providing PCC M15 nominal mix using 20 mm size graded HBG crushed metal including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc.,to site seniorage charges on all materials, labour charges for mixing, laying concrete,raming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work as directed by Engineer-in Charge (for Side walls)

KTK SWD 1Cr;RBR-FNDN(E) :RCC M- 25 (Design Mix):Providing concrete for plain/reinforced concrete in open foundations using 20 mm Graded Metal (MORD & MORTH 12.8 E) hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

KTK SWD 1Cr;RBR-FNDN-4 :Providing PCC M15 nominal mix using 20 mm size graded HBG crushed metal including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc.,to site labour charges for mixing, laying concrete,raming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work as directed by Engineer-in Charge (Benching Concrete)

KTK SWD 1Cr;RBR-FNDN(E) :RCC M- 25 (Design Mix):Providing concrete for plain/reinforced concrete in open foundations using 20 mm Graded Metal (MORD & MORTH 12.8 E) hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

KTK SWD 1Cr;RBR-FNDN(E) : Providing RCC M- 25 (Design Mix) concrete using 20 mm Graded Metal (MORD & MORTH 12.8 E) hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. (Culvert slab)

KTK SWD 1Cr;RBR-FNDN-7 : Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work in all floors.( APSS No.126).

KTK SWD 1Cr;Carting away the surplus excavated earth from the work site with a lead of 5.0 km beyond initial lead including loading, unloading and conveyance including stacking charges etc., complete for roads/drains- 1 cum

KTK SWD 1Cr;RBR-STCL-7 - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH

KTK SWD 1Cr;Laying of RCC Trunk Mains

KTK SWD 1Cr;RBR-FNDN-1- ( I-A-i ) In ordinary soils, up to 3.00 Mts depth below GL by Manual means: Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material , dressing of sides and bottom as per Technical Specification 305 MoRD / 304 MoRTH and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for laying sewer/water pipe lines including divertion of traffic and backfilling in trenches with excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational charges etc., complete for Pipe Line trenches by manual means.

KTK SWD 1Cr;Amendment as per SOR 2021-22: Collection, Supply and filling with HBG stone chips 2.36 mm & below from approved quarry to work site and stacking at work site to Dept. gauge for premeasurements including cost and convenyance of all material and all labour charges etc. complete as per standard specifications. Clause 305.3.9 MORD & 304 MORTH.

KTK SWD 1Cr;Supply and delivery of Salt Glazed Pipes of ISI make conforming to ISI 651 including cost and conveyance of pipes i.e laoding at factory, transporation, unloading at site and stacking etc, complete (350mm Dia )

KTK SWD 1Cr;Supply and delivery of Salt Glazed Pipes of ISI make conforming to ISI 651 including cost and conveyance of pipes i.e laoding at factory, transporation, unloading at site and stacking etc, complete (300mm Dia )

KTK SWD 1Cr;PHE - LJSW-13: Lowering and laying in ready made trench true to alignment and gradient, jointing, and testing of stone ware pipes including cost of jointing material such as cement mortar (1:1) proportion and hemp yarn but excluding cost and conveyance of pipe. (Reference to specifications BIS No. 6530/72) (350mm Dia )

KTK SWD 1Cr;PHE - LJSW-13: Lowering and laying in ready made trench true to alignment and gradient, jointing, and testing of stone ware pipes including cost of jointing material such as cement mortar (1:1) proportion and hemp yarn but excluding cost and conveyance of pipe. (Reference to specifications BIS No. 6530/72) (300mm Dia )

KTK SWD 1Cr;TBSP-B.I-03: Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

KTK SWD 1Cr;Carting of surplus excavated rock/Soil within a lead of 5Km from the site to a distance suitable including loading charges, cost & conveyance, dumping, labour charges and other incidental and operational charges etc., complete.