Public Health And Municipal Engineering Department Tender

Providing Vibrated Cement Concrete ( 1:5:10 ) CC Mix usng 40 mm metal size HBG crushed stone graded metal and fine aggregate conforming to table 1000-2 of MoRT&H including cost, seigniorage conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2200 (4th Revision) and as directed by the Engineer-in-Charge for Side Wall

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prpared sub base, with 43 grade cement or any other type as per clause 1501.2.2 - M20 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick plythene film wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridges / culvert and construction joints admixtures as approved, curing of concrete slabs for 14-days, curing compound (where spcified) and water finishing to lines and grade as per drawing and Technical specification clause 1501 MORD.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and brancing, removal of stumps and other deleterious material and desposal upto a lead of 50 m, dressing of sides and bottom and backifilling in trenches with eccavaed suitable material as per Technical Specification 305 MORD / 304 MORTH.

Supplying and filling of Crusher stone dust including cost of quarrying carting and spreading at site including cost of all materials and labour charges etc.,

Plain Cement Concrete M7.5 ( 1:4:8 ) CC Mix usng 40 mm metal with concrete mixture. All work upto plinth level

Providing Vibrated Cement Concrete ( 1:3:6 ) CC Mix usng 20 mm metal size HBG crushed stone graded metal and fine aggregate conforming to table 1000-2 of MoRT&H including cost, seigniorage conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2200 (4th Revision) and as directed by the Engineer-in-Charge for Side Wall

Providing Vibrated Cement Concrete ( 1:2:4 ) CC Mix usng 20 mm metal size HBG crushed stone graded metal and fine aggregate conforming to table 1000-2 of MoRT&H including cost, seigniorage conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2200 (4th Revision) and as directed by the Engineer-in-Charge for Culvert Side Wall

Providing Plain Cement Concrete ( 1:2:4 ) CC Mix usng 20 mm metal size HBG crushed stone graded metal and fine aggregate conforming to table 1000-2 of MoRT&H including cost, seigniorage conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work(Excluding form work) (RBR-FNDN-4G V(i))

Plastering in CM (1:3) 12 mm thick including cost and conveyance of all materials , seigniorage charges , labour charges, curing etc complete for finished item of work as directed by the Engineer -in-Charge

Vibrated reinforced cement concrete of M30 grade using 20mm & 10mm HBG crushed stone aggregate including cost and seignorage, conveyance of all materials and labour charges centring, machine mixing, laying, vibrating, curing etc., including other incidental hire and operatioal charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item of work.

Supplying, fitting and placing HYSD bar reinforcement in foundation completed as per drawings and technical specification for bars below 36mm dia including over laps and wastage.