Public Health And Municipal Engineering Department Tender

Construction of cc drain and Roads;BLD-CSTN-2-4 (12) Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixture.All work upto plinth level. Including cost and conveynace of all materials labour charges etc complete.

Construction of cc drain and Roads;Plain Cement Concrete (M10)- Nominal Mix (1:3:6) Prop with 20mm metal hand/machine mixing including cost and conveyance of all materials and labour charges etc., complete for Walls.

Construction of cc drain and Roads;RBR-FNDN-4;Plain Cement Concrete (M15)- Nominal Mix using 20mm size graded HBG crushed metal including cost and conveyance of all materials like cement,sand,coarse aggregate,water etc.to site ,labour charges for mixing ,laying concrete ramming in 15cm layers finishing top surface to the required level curing etc,complete for finished item of work as directed by ERNC

Construction of cc drain and Roads;BLD-CSTN-3-13 (30) RCC M-20 Nominal mix ( Cement:fine aggregate : coarse aggragate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc. to site, all operational, incidental, and labour charges such as machine mixing, laying concrete, curing etc,.. complete but excluding cost of steel and its fabricaton charges for finished item of work, but excluding centering, shuttering. AP Revised data Building

Construction of cc drain and Roads;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Construction of cc drain and Roads;Carting of surplus excavated soil /waste material etc, dumping distance 5.00km radias from the site to out of the town including carting and conveyance charges and labour charges etc complete.

Construction of cc drain and Roads;RBR-EECD-5 (iii) Excavation Mechanical Mean in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m, Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with all lifts and lead upto 1000 m as per Technical Specification Clause 302.3 MORD / 301 MORTH

Construction of cc drain and Roads;Collection & Spreading with Carted Stone Crushed Dust, including cost and conveyance of all Collected in required thickness as per Technical specification 307 MORTH

Construction of cc drain and Roads;Plain Cement Concrete (1:5:10) using 40 mm metal with Concrete Mixture. All work upto Plinth Level including cost and conveyance of all materials and labour charges etc., complete

Construction of cc drain and Roads;Cement Concrete Pavement Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification

Construction of cc drain and Roads;Vaccum drying of freshly laid cement concrete floor using 100% air tight suction mat of suitable size and length,vaccum pump to maintain vaccum pressure 0.7-0.8 atmosphere as per the standard procedure,floating with power floater,vibrating using Screed vibrator, mechanical trowelling, finishing with sound edges and corners,including hire and operational charges of machinery ,labour,fuel etc,complete for finished i tem as directed by the -in-Charge.

Construction of cc drain and Roads;Saw cut joints for freshly laid concrete pavement including all material and labour charges(Groooves 2-3mm)

Construction of cc drain and Roads;BLD-CSTN-2-8(modification)Filling with Gravel in trenches sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational,incidental,labour charges hire charges of T&P etc complete for finished item of work (APSS No.309&310)

Construction of cc drain and Roads;Manufacture, Supply and Delivery of R.C.C. Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes conforming to B.I.S. 458/2003 at ex-factory (rate per meter of effective length) Excluding transportation & taxes.- RCC Np2 pipes 300mm dia