Professor Jayashankar Telangana State Agricultural University Tender

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Providing 160 mm dia ISI marked PVC underground pipe of SN 2 KN/m2r of ISI marked including cost of necessary all other accessories and fixing in position including cost and conveyanace of all materials, sales and other taxes on materials to site, operational & incidental charges including all labour charges for fixing as site etc., and or finished item of work.

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Removing of MS steps including all labour charges etc., complete as directed by the department.

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i) Ventilators: Fixed louvers 2'-0 x 2'-0 (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm and (ii) Ventilators: Fixed louvers 4'-0 x 2'- 0 (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm and (iii) Ventilators: Fixed louvers 4'-0 x 3'-0 (1219.2 x 914.4 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm (TBSC-M.II-02)

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) Fixed Glazing - 48 series duly manufactured using PVC reinforced profiles of 60 mm x 48 mm x 2.25 mm for outer frames and the mullion sections are of 60 mm x 76 mm x 2.25 mm frames are structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm the sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with EPDM weathering seal resistant including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (TBSC-N.I-03)

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Providing and fixing 2 Track 2 glass shutter sliding Windows fabricated from roll formed sections made of Galvanized Steel Colour Coated/ Powder Coated (Base Steel as per IS 513 ?D? quality, Galvanized as per IS 277 with Zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58 mm. Primer coat with epoxy primer of 5?7 micron thick, finish painted with polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Section for external frame should be of 44 x 59mm, Section for glass shutter should be of 35 x 49 mm Section for euro groove should be 25 x 24mm( Aluminium/Plastic)and Lap Strip should be of 30 x 41mm(Aluminium/Plastic).shutter should be provided with a glass of 5mm Plain Float Glass. Corner bracket for External frame made of Steel/Polypropylene, Corner Bracket for Internal frame made of Steel/Polypropylene, Touch Lock, Rollers, wool pile for lap strip & euro groove, Bump Stop Base & Rubber for shutter stopper. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter. The Frame Section should be cut to length and mitre joined with Corner brackets & Shutter Sections should be cut to length and mitre joined with Corner Bracket. Window Frame should be fixed to brick/ concrete masonry by using Nylon selfexpanding caps and driving MS electroplated 80mm long screws into the caps through frames.10mm square guard bars with 6? pitch (152.4mm) max to be fixed wall to wall and all taxes complete for finished item of work (TBSC-M.II-01)

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast and including Flush door shutters of 30 mm thick solid bond wood block board type with commercial ply ON BOTH faces conforming to IS:2202 and providing and fixing PVC door cladding to the flush doors shutter it shall be pasted with synthetic glue 1 mm thick including cost of Aluminium fixtures 1 No tower bolt of 250x10mm dia, 1 No. Aldrops - 300 mm long, 1 No. Latch - 300 mm long, 2 Nos. handles of 150 mm size and 3 nos of butt hinges of 125mm including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, overheads & contractors profit etc., complete for finished item of work.

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Supplying and fixing Gyp Board Fine Line Grid false ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using 12.5 mm thick/ 9.5 mm thick Gyp Board sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm conforming to IS 2095 - 1982 fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC unversal holding clips system at 1200 mm c/c and fixing the 12.5 mm / 9.5 mm Gypboard Sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm and finishing two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification.

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Epoxy tile joint fixing cutting of grooves of 2mm width and upto tile depth for corrider and toilets floor as per the requirement including cost of labour, material and machinery etc. complete (TBSC-V.IV-12)

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Providing specialised structural repairs to the ceiling area:

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Reinforced Brick Masonry for partition walls (115 mm thick) in CM (1:6) prop.(Cement:Sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding cost of seigniorage charges on all materials, scaffolding charges and all labour charges like mixing cement mortar, lift charges, curing, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501) for:-Reinforced Brick Masonry in CM 1:4 (Country)

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete.

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for Brick work

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Removing of AC sheet including all labour charges etc., complete as directed by the department. (TBSC-U.I-02)

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Labour charges for lifting heavy tables.

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Providing Pin headed glass 4mm thick including cost of putty chips etc., cost of conveyance of all materials, labour charges, etc., complete as directed by the department.

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Painting with 2 coats of approved synthetic enamel paint of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete.

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Painting to walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, scraping, labour charges etc. complete for finished item of work as per SS 911 for Internal walls for:-Internal Colouring - Plastic emulsion paint - 2 Coats

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Painting to walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, scraping, labour charges etc. complete for finished item of work as per SS 911 for Internal walls for:-External Colouring - acrylic emulsion paint - 2 Coats

Providing Repairs to Textile Lab at CCSc, Saifabad, Hyderabad;Item Detailed Specification Description