Professor Jayashankar Telangana State Agricultural University Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 15,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
256351Bid Award Id
ViewTender No
07-2/PJTSAU/EO/TPA/TA/2021-22, Dt: 17-07-2021Tender Authority
Professor Jayashankar Telangana State Agricultural University ViewPurchaser Address
-Website
http://https://pjtsau.edu.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Office cum Instrumentation Tools;Supply and fixing of LAN Cable cat - 6 UTP cable of Makes : D Link / AMP / Molex / Legrand / Krone. including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B
250
-
9000
... More
Office cum Instrumentation Tools;Supply and run of 25mmx3mm copper strip including cost of all accessories and labour charges etc.,complete
30
-
17070
... More
Office cum Instrumentation Tools;Supply, Transportation and Fixing of 9" (225mm) light duty exhaust fan with wire guard etc complete of makes Crompton / Havells Ventilair-DB /Orient hill air Make exhaust / Fresh Air fan with metallic body and blades including making hole in wall and masonary work and all labour charges etc., complete.
8
-
19568
... More
Office cum Instrumentation Tools;Supply of 7.0W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base, 490 Lumens.Makes: Phillips / OSRAM / GE / Crompton / VIN /Bajaj / Havells / Pharox / Halonix / Green lites.
10
-
1450
... More
Office cum Instrumentation Tools;Supply and fixing of Anchor/Gold Medal Olive/million Zoom make ISI mark batten holder / angle holder on existing block, but without bulb including all connections etc., complete (For replacement)
10
-
970
... More
Office cum Instrumentation Tools;Providing earth electrode of low carbon steel rod, UL listed of 17.2 mm dia, 3 Mtr long, coated with copper of 254 microns thickness, CPRI tested for short time current withstand test of 25 kA, coating thickness, environmental test (Salt Mist Test), Bend test, Tensile strength, Yield /tensile ratio, Electrical Resistivity test,complete with clamps and 2 bags of Earthplus ULTRA high grade earthing compound IEC 62561-7 complaint Ecofriendly,Maintenance free, anti corrosive, lead-free, super conductive, mineral based high-grade earthing compound, to enhance soil conductivity. With resistance <0.20 ohms-meter, should be leach proof & sulphur free complete with earth inspection chamber of dimensions : Width :320 mm x 320 mm, Height : 192 mm, Weight : 30 Kgs, Load bearing capacity :5000 Kgs including drilling of bore in any kind of soil.
1
-
16851
... More
Office cum Instrumentation Tools;Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through flange with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
2
-
18790
... More
Office cum Instrumentation Tools;Supply and fixing of Legrand/Schneider make DB with 32A TP plug and socket in SS enclosure with (6-32)A TPMCB,C/D curve of including internal connection and labour charges for Flush Mounting etc., complete.
4
-
19232
... More
Office cum Instrumentation Tools;Supply and fixing of Legrand/Schneider make DB with 1 No 20A single phase plug and Socket, in sheet steel enclosure with 1 No 10A to 20A 10 KA SP MCB including internal connection and labour charges for Flush Mounting etc., complete
4
-
8480
... More
Office cum Instrumentation Tools;Supply and fixing of 8 Way VTPN DB accomodating 125A 4 Pole MCCB as incomer and 8 Nos(40-63)A TP MCBs as outgoing and with IP 43 Protection of makes Legrand / Schneider. , including internal connections and labour charges for Flush Mounting etc., complete
1
-
39731
... More
Office cum Instrumentation Tools;Supply and fixing of 12 way SPN DB Harizontal with IP-43 Protection makes Legrand/Schneider suitable for with 1No 40A DP isolator and 12Nos 6-32A 10KA SP MCB,C/D Curve ISI Mark of make Legrand/Schneider , including internal connections and labour charges for Flush Mounting etc., complete(Conseling)
1
-
6858
... More
Office cum Instrumentation Tools;Supply and fixing of (8+12) 4 way TPN DB Harizontal with IP-43 Protection makes Legrand/Schneider suitable for with 1No 100A FP isolator and 12Nos 6-32A 10KA SP MCB,C/D Curve ISI Mark of make Legrand/Schneider , including internal connections and labour charges for Flush Mounting etc., complete.
2
-
19120
... More
Office cum Instrumentation Tools;Supply,fixing and transportation of 18 W +/-10% back lit LED Down Light Recessed /Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / OSRAM / Wipro/ Crompton / Havells / Jaquar / IB LED / Panasonic / Halonix / Syska /Eveready / Keselec / FIEM.LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM / SAMSUNG / LG LEDs...including all accessrioes and all labour charges etc.,complete.
20
-
46860
... More
Office cum Instrumentation Tools;Supply,fixing and Transportation of 10W,1000 lumens, 600mm length LED batten tube light, housing made with PC body, wide operating voltage with Single /double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K -6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc complete with 5 years warranty with BIS Certification.LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro / Crompton / Havells / Jaquar / IB LED / Panasonic /Halonix / Syska / Eveready /Keselec.LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM / SAMSUNG / LG LEDs. including all accessories and labour charges etc complete
10
-
7810
... More
Office cum Instrumentation Tools;Supply,fixing and Transportation of 22W, +/ 10% , >/ 2300 lumens, 1200mm length LED light housing made with alluminium anodised body, wide operating voltage with PF=0.9, Surge protection: >2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI=80 etc., complete with 5 years warranty with BIS certification with BIS Certification.LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Crompton /Havells / Jaquar / IB LED / Panasonic /Halonix /Syska / Eveready .LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM / SAMSUNG / LG LEDs including all accessories and labour charges etc complete
25
-
28050
... More
Office cum Instrumentation Tools;Supply & Fixing of Electronic step type Fan Regulator.Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal GIFA /GM-Zenova/ L&T- Englaze including 2 way module box and Cover frame including all accessories and labour charges etc complete
8
-
5256
... More
Office cum Instrumentation Tools;Supply, Transportation and Fixing of energy efficient decorative fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle kit, safety rope, copper winding, Power Factor greater than 0.90,Service Value (CMM/W) greater than 8.5,Air delivery minimum 235 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%, remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., complete.Makes :Atomberg (Efficio + ) / Havells / Orient including all labour charges etc., complete.
8
-
29160
... More
Office cum Instrumentation Tools;Supply and fixing of 16A/6A 1 way Combi Socket Modular Socket ( Sockets combined 2 in one) with 20A 1 Way Modular Switch with indicator of Legrand Myrius / Cabtree verona /Million Logus / Gold Medal Curve / Anchor Roma viola/ CPL make make with suitable cover frame and Modular box and earth connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B
20
-
11740
... More
Office cum Instrumentation Tools;Supply and fixing of 10A 3/2 pin 2 module modular Socket with 10A 1 Way 1 module Modular Switch of Legrand Myrius / Cabtree verona/Million Logus / Gold Medal Curve / Anchor Roma viola/ CPL make make with suitable cover frame and Modular box and earth connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B
15
-
7350
... More
Office cum Instrumentation Tools;Supply and Run of 5 of 140/0.3mm (10.00 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes Finolex / RR kabel / Havells / APAR EBXL / KEI(HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR). make in existing pipe for run of mains inlcuding all labour charges etc., com
40
-
22080
... More
Office cum Instrumentation Tools;Supply and Run of 5 of 86/0.3mm (6.00 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes Finolex / RR kabel / Havells / APAR EBXL / KEI(HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR). make in existing pipe for run of mains inlcuding all labour charges etc., com
60
-
22380
... More
Office cum Instrumentation Tools;Supply and Run of 5 of 56/0.3mm (4.00 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes Finolex / RR kabel / Havells / APAR EBXL / KEI(HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR). make in existing pipe for run of mains inlcuding all labour charges etc., com
120
-
30720
... More
Office cum Instrumentation Tools;Supply and Run of 3 of 56/0.3mm (4.00 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes Finolex / RR kabel / Havells / APAR EBXL / KEI(HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR). make in existing pipe for run of mains inlcuding all labour charges etc., com
450
-
75600
... More
Office cum Instrumentation Tools;Supply and Run of 3 of 36/0.3mm (2.50 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes Finolex / RR kabel / Havells / APAR EBXL / KEI(HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR) make in existing pipe for run of mains inlcuding all labour charges etc., com
160
-
23360
... More
Office cum Instrumentation Tools;Wiring with run of 3 of 22/0.3mm (1.50 Sq.mm) FRLS/HFFR PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes :Finolex / RR kabel / Havells / APAR EBXL / KEI(HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR). make in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with cover frame of ISI Mark Legrand Myrius / Cabtree Thames Platinum /Million Logus / Gold Medal Curve / Anchor Roma viola / CPL makes with required cover frame to be fixed with Modular box in existing surface / consealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete including cost and conveyance of all materials and all labour charges etc., complete for light and bell points in N.R.B
8
-
6472
... More
Office cum Instrumentation Tools;Wiring with run of 2 of 22/0.3mm (1.50 Sq.mm) FRLS/HFFR PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) /L&T / V-Guard (HFFR) make in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with cover frame of ISI Mark Legrand Myrius / Million Tap-Wood/ Anchor Roma viola / Havells Fabio / C&S Prime / CPL Vysma / Benlo Vesta / Polycab Levana makes with required cover frame to be fixed with Modular box in existing surface / consealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete including cost and conveyance of all materials and all labour charges etc., complete for light and bell points in N.R.B
55
-
37455
... More
Office cum Instrumentation Tools;Supply and fixing of 25mm outer dia Heavy(1.50mm thickness) grade with IS:9537 part 3 regid PVC pipe makes Sudhakar / Modi / Atul along with reinforcement is concealed in wall with all required accessories including chiseling the wall whenever necessary including masonry work including all labour charges etc., complete and as directed by the department for fan point, light point and plug point including all labour charges.
240
-
22800
... More
Office cum Instrumentation Tools;Supply and fixing of 25mm outer dia Heavy(2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe makes Sudhakar / GM / Modi / AKG / VIP along with reinforcement is concealed in Roof Slabs with all required accessories including chiseling the wall whenever necessary including masonry work including all labour charges etc., complete and as directed by the department for fan point, light point and plug point including all labour charges.(for Slabs)
120
-
12480
... More
Office cum Instrumentation Tools;ELECTRICAL WORKS
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
35
-
770
... More
Office cum Instrumentation Tools;a) Stilt Floor
35
-
770
... More
Office cum Instrumentation Tools;Supply and Fixing of Rabbit wire mesh (chicken mesh) of not less than 30 gauge including cost & conveyance, all labour charges, screws, nails, bindung wire etc
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
3
-
15288
... More
Office cum Instrumentation Tools;a) Stilt Floor
3
-
15288
... More
Office cum Instrumentation Tools;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Fixed Glazing/ Window duly manufactured using UPVC reinforced profiles of 60 mm x 60 mm x 2.60 mm for frames and the mullion sections are of 60 mm x 82 mm x 2.60 mm frames are structurally reinforced with hot dip galvanized up to 50 microns of size 35 mm x 28 mm of thickness 1.5 mm the sash shall be fitted with 5 mm thick clear float glass ofreputed make duly fixed with EPDM weathering sealresistant and glazing bead 34.5 mm x 18 mm including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
96
-
63552
... More
Office cum Instrumentation Tools;a) Stilt Floor
96
-
63552
... More
Office cum Instrumentation Tools;Supplying and fixing stainless steel works such as raling, hand rail, grills etc., using Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & Diameters for - 304 Grade as per the approved drawing including cost and conveyance of all materials to site, Labour charges for Fabrication of stainless steel works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish, overheads & contractors profit etc ., complete for finished item of work.
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
71
-
74976
... More
Office cum Instrumentation Tools;a) Stilt Floor
71
-
74976
... More
Office cum Instrumentation Tools;Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat, overheads and contractors profit, etc. complete for finished item of work as per Idia Gypsum Ltd specification.
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
71
-
84987
... More
Office cum Instrumentation Tools;a) Stilt Floor
71
-
84987
... More
Office cum Instrumentation Tools;Supplying and fixing of 14/15 mm - Micro Look Edge 600 x 600 of Board / Tegular/ Micro look Edge tiles with a Humidity Resistance of 95% RH, Average NRC 0.90, Light Reflectance >88%, Thermal Conductivity ? = 0.032 w/mk, Fire Performance Class 0/Class 1suitable for Green Building application, with Recycled content of 88% (FG) ; fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC universal holding clips system at 1200 mm c/c and fixing the 14mm Mineral Fibre Sheet of size 600 x 600 mm in position and finishing two coats of drywall topcoat including overheads & contractors profit, etc. complete for finished item of work.
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
25
-
4375
... More
Office cum Instrumentation Tools;a) Stilt Floor
18
-
3150
... More
Office cum Instrumentation Tools;Painting with 2 coats of approved synthetic enamel paint over a coat of primer of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for:-Painting to wood work - Synthetic enamel paint over a coat of primer to New Iron Work - 2 coats + 1 coat primer
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
8
-
9192
... More
Office cum Instrumentation Tools;a) Stilt Floor
7
-
8043
... More
Office cum Instrumentation Tools;Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., including overheads & contractors profit complete for finished item of work for:-Polishing to wood work - Melamine Polishing to Wood Work.
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
222
-
156954
... More
Office cum Instrumentation Tools;a) Stilt Floor
127
-
83566
... More
Office cum Instrumentation Tools;Providing and applying Exterior grade Texture ready mixed paint with sand texture added sand particles Acrylic copolymers and mineral compounds, bactericides and various additives or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation and applying 2 coats of weather proof exterior emulsion paint of approved brand and shade over a coat of primer including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - including cost of access scaffolding for:-External Colouring - Providing Texture and 2 coats weather proof exterior emulsion paint over a coat of primer to External walls
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
449
-
198009
... More
Office cum Instrumentation Tools;a) Stilt Floor
193
-
78744
... More
Office cum Instrumentation Tools;Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation and applying 2 coats of plastic emulsion paint of approved brand and shade over a coat of primer including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for INTERNAL walls - including cost of access scaffolding for:-Internal Colouring - Providing Putty and 2 coats plastic emulsion paint over a coat of primer to Internal walls
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
1
-
6932
... More
Office cum Instrumentation Tools;a) Stilt Floor
1
-
6932
... More
Office cum Instrumentation Tools;Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm.,including provision for Exhaust, cost and conveyance of all materials, accessories, labour charges for transportation, erection at site, including overheads and contractor profit etc.,complete for finished item of work.
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
25
-
32875
... More
Office cum Instrumentation Tools;a) Stilt Floor
18
-
23670
... More
Office cum Instrumentation Tools;Supplying and fixing ornamental MS Grills including fabrication and erection in position using alround frame of 25mm X 5mm MS flat welded with 10mm square bars placed at 5" c/c Hor, 10" c/c ver fixed in both horizontal and vertical directions including cost and conveyance of all materials to work site and all operational, incidental labour charges, power charges, overheads & contractors profit etc., complete for finished item of work.
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
25
-
219600
... More
Office cum Instrumentation Tools;a) Stilt Floor
18
-
158112
... More
Office cum Instrumentation Tools;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co- extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
-
-
-
... More
Office cum Instrumentation Tools;S/F of 30mm thick WPC(wood plastic composite) solid door shutter factory made including made including fixing of MS powder coating alum coating alum fixture such as3nos.butt hinges,150mmht,1no tower bolts 150mm long, 2nos alum long handles,125mm long 1no aldrop 200mm long, including fixing the door shutter to frame for finished item of work (Rate as per Quotation approved by the Executive Engineer).
7
-
24500
... More
Office cum Instrumentation Tools;Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast.
24
-
18000
... More
Office cum Instrumentation Tools;Supply and fixing Single shutter door with Medium teak wood frame of size 125x75mm and Flush door shutters 35mm thick FACTORY MADE MOULDED DOOR SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped with 15mm (5mmX3) thick X 30mm width on one stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different panel and /or prelamcolours on one side after routing the moulded design on flush door and 2mm prelam Pac sheet on other side using rubber adhesive on flush door and solvent cement adhesive on Pac lipping etc. complete, cost of fixtures like 6 Nos MS-Z Hold fasts-300 mm long of 40x40x5mm ISA, 3 Nos SS Butt hinges (IS:205)- 150 mm Long, 1 No SS Tower Bolt-10 mm (IS:204) 250 mm Long, 1 No. SS latch heavy 300 mm long, 1 No. SS Aldrop (IS:2681) 300 mm long, 2 Nos. SS fancy handles 150 mm long , 1 No. SS Door Stoppers, 1 Nos.Rubber/ Nylon door stop bushes, 1 no.s of 5mm clear glass panels in the vision panels portion including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractor profit etc., complete for finished item of work.
9
-
62415
... More
Office cum Instrumentation Tools;b) Ground Floor
4
-
26096
... More
Office cum Instrumentation Tools;a) Stilt Floor
7
-
45668
... More
Office cum Instrumentation Tools;Supply and fixing double shutter door with Medium teak wood frame of size 125x75mm and Flush door shutters 35mm thick FACTORY MADE MOULDED DOOR SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped with 15mm (5mmX3) thick X 30mm width on one stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different panel and / or prelamcolours on one side after routing the moulded design on flush door and 2mm prelam Pac sheet on other side using rubber adhesive on flush door and solvent cement adhesive on Pac lipping etc. completeincluding cost of fixtures like 6 Nos MS-Z Hold fasts-300 mm long of 40x40x5mm ISA, 6 Nos SS Butt hinges (IS:205)- 150 mm Long, 2 No SS Tower Bolt-10 mm (IS:204) 250 mm Long, 1 No. SS latch heavy 300 mm long, 1 No. SS Aldrop (IS:2681) 300 mm long, 4 Nos. SS fancy handles 150 mm long , 2 No. SS Door Stoppers, 2 Nos.Rubber/ Nylon door stop bushes, 2 no.s of 5mm thick clear glass panels in the vision panels portion including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractor profit etc., complete for finished item of work
-
-
-
... More
Office cum Instrumentation Tools;Suplying and Fixing bestteak wood ornamental main door fully panelled double shutter and glazed partition with toughened glass 8 mm thick using 4" X 9" frame ,7" X2 " styles, lock and top rails of 6" X2" , bottom rail of 11"x2", 1 1/4" thick B.T wood planks with covering and alround planks with Covering 3/4" X1/2" ornamental best teak wood beading and Fixing fixtures.
5
-
71880
... More
Office cum Instrumentation Tools;a) Ground Floor
36
-
28512
... More
Office cum Instrumentation Tools;Dadooing to walls with digital / polished glazed full body porcelain highlighter wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., including cost of overheads & contractors profitcomplete for finished item of work as directed by Engineer-in-charge.
-
-
-
... More
Office cum Instrumentation Tools;a) Ground Floor
9
-
8235
... More
Office cum Instrumentation Tools;Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed)cost of excluding seigniorage on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No.707 & 701)
-
-
-
... More
Office cum Instrumentation Tools;Granolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal and screened sand laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal sand and water, overheads & contractors profit, complete for finished item of work. (APSS No.701 & 710)
100
-
40900
... More
Office cum Instrumentation Tools;b) Ground Floor
10
-
12240
... More
Office cum Instrumentation Tools;a) Stilt Floor
4
-
4720
... More
Office cum Instrumentation Tools;Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles withdouble layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering.
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
122
-
149938
... More
Office cum Instrumentation Tools;a) Stilt Floor
30
-
35550
... More
Office cum Instrumentation Tools;Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles withdouble layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)
-
-
-
... More
Office cum Instrumentation Tools;Providing Platfrom with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) black set over a base coat of CM (1:8) prop. 20mm thick, including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand, water, granite, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work (APSS No.701 & 707)
2
-
7650
... More
Office cum Instrumentation Tools;b) Ground Floor
5
-
30235
... More
Office cum Instrumentation Tools;a) Stilt Floor
3
-
17664
... More
Office cum Instrumentation Tools;i) Treads of Window Sills
-
-
-
... More
Office cum Instrumentation Tools;Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) ,12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads of window sills on both edges , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work for (S.S.701 & special)
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
1
-
4588
... More
Office cum Instrumentation Tools;a) Stilt Floor
1
-
4509
... More
Office cum Instrumentation Tools;Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of Regular colours (other than black) in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand, water flooring stones etc. to site , cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work (APSS No.701 & 707) Work.
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
15
-
6300
... More
Office cum Instrumentation Tools;a) Stilt Floor
22
-
9240
... More
Office cum Instrumentation Tools;iv) Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same.
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
72
-
5328
... More
Office cum Instrumentation Tools;a) Stilt Floor
90
-
6660
... More
Office cum Instrumentation Tools;iii)Cutting Grooves 2-3 mm in Granite slabs
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
6
-
24312
... More
Office cum Instrumentation Tools;a) Stilt Floor
7
-
27972
... More
Office cum Instrumentation Tools;ii) Risers
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
11
-
66517
... More
Office cum Instrumentation Tools;a) Stilt Floor
14
-
82432
... More
Office cum Instrumentation Tools;i) Treads of Steps
-
-
-
... More
Office cum Instrumentation Tools;Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work (S.S.701 & special)
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
5
-
21350
... More
Office cum Instrumentation Tools;a) Stilt Floor
8
-
33504
... More
Office cum Instrumentation Tools;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
161
-
92736
... More
Office cum Instrumentation Tools;a) Stilt Floor
10
-
5360
... More
Office cum Instrumentation Tools;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
600
-
316800
... More
Office cum Instrumentation Tools;a) Stilt Floor
302
-
145564
... More
Office cum Instrumentation Tools;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
24
-
13296
... More
Office cum Instrumentation Tools;a) Stilt Floor
11
-
5533
... More
Office cum Instrumentation Tools;Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
11
-
102399
... More
Office cum Instrumentation Tools;a) Stilt Floor
3
-
25803
... More
Office cum Instrumentation Tools;Brick Masonry work in Adesive jointing mortar with Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 (landing cost - including cost of conveyance, loading & unloading) 600 x 200 x 100 mm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., complete for walls for Superstructure Walls.
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
53
-
406775
... More
Office cum Instrumentation Tools;a) Stilt Floor
32
-
231232
... More
Office cum Instrumentation Tools;Brick Masonry work in Adesive jointing mortar with Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 (landing cost - including cost of conveyance,loading & unloading) 600 x 200 x 230 mm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., complete for walls for Superstructure Walls.
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
62
-
18972
... More
Office cum Instrumentation Tools;a) Stilt Floor
53
-
16218
... More
Office cum Instrumentation Tools;Providing and Fixing of Edge Trim including all charges
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
161
-
207851
... More
Office cum Instrumentation Tools;a) Stilt Floor
142
-
183322
... More
Office cum Instrumentation Tools;Providing and Fixing of TR60+ 1.00mm thk JSW Structural Metal Decking Sheets including necessary studs, all lanour charges etc
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
14.2
-
60548.8
... More
Office cum Instrumentation Tools;a) Stilt Floor
13.7
-
58416.8
... More
Office cum Instrumentation Tools;Extra for providing and applying of enamel paint of approved brand and manufacture on steel works for two or more coats to give the smooth and even shade including scafolding and staggings and tools etc., all complete as per the engineer in charge directions.
-
-
-
... More
Office cum Instrumentation Tools;a) Stilt Floor
0.2
-
9878.2
... More
Office cum Instrumentation Tools;Providing and laying of grouting for the gap between the base plates and pedestals using with grouting material of conbextra GP2 grout/Sysgrout 652 of venders specifications etc., including cost & conveyance of all materials, all incidental, operational and Labour charges etc for finished item of work. as per the directions of the engineer in charge
-
-
-
... More
Office cum Instrumentation Tools;a) Stilt Floor
0.4
-
53460
... More
Office cum Instrumentation Tools;Providing and fixing of base plates in any thickness etc., including cutting, fixing in position and applying of priming coat of approved steel primer all complete.
-
-
-
... More
Office cum Instrumentation Tools;a) Stilt Floor
0.3
-
36333
... More
Office cum Instrumentation Tools;Providing and fixing mild steel round holding down bolts EN 8.8 grade with nuts and washer plates complete
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
14.2
-
1719762
... More
Office cum Instrumentation Tools;a) Stilt Floor
11
-
1332210
... More
Office cum Instrumentation Tools;Supply, Fabrication and erection in position structural steel work in built up sections, rolled steel sections, trusses and framed work of approved Grade including cutting, hoisting fixing in position and applying zinc chromate primer to exposed surfaces of steel etc., complete as per specification and as directed. Hot rolled/Builtup sections
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
0.1
-
7655.9
... More
Office cum Instrumentation Tools;a) Stilt Floor
0.2
-
15033.6
... More
Office cum Instrumentation Tools;Providing Mild steel (MS) steel bars ( (Fe 250 grade as per IS 432) of different diameters including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to bars, including all wastages such as overlaps, couplings, chairs, spacer bars, including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials and cost of overheads & contractors profit etc., complete for finished item of work in all floors.( APSS No.126)
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
0.9
-
73197.9
... More
Office cum Instrumentation Tools;a) Stilt Floor
3.7
-
295778
... More
Office cum Instrumentation Tools;Supplying, fitting and placing Thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)
-
-
-
... More
Office cum Instrumentation Tools;Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) i) 50 mm thickWindow Sills & Platforms-Ground Floor
8
-
7832
... More
Office cum Instrumentation Tools;b) Ground Floor
12
-
13404
... More
Office cum Instrumentation Tools;a) Stilt Floor
10
-
10620
... More
Office cum Instrumentation Tools;Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., for 60 cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting concrete, laying concrete, curing, cost of overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work for Sunshades (APSS No. 402, 403 & 903) & 903)
-
-
-
... More
Office cum Instrumentation Tools;iii) Curtain Wall 230 mm Thk
42
-
145026
... More
Office cum Instrumentation Tools;ii) Curtain Wall Base
5
-
52175
... More
Office cum Instrumentation Tools;b) Ground Floor
1.1
-
15567.2
... More
Office cum Instrumentation Tools;a) Stilt Floor
1
-
13391
... More
Office cum Instrumentation Tools;i) Lintels
-
-
-
... More
Office cum Instrumentation Tools;Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
161
-
157136
... More
Office cum Instrumentation Tools;a) Stilt Floor
142
-
118854
... More
Office cum Instrumentation Tools;i) Deck Slab 150 mm thick at Trough & 90 mm at Ridge (Avg 120 mm Thk)
-
-
-
... More
Office cum Instrumentation Tools;Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
-
-
-
... More
Office cum Instrumentation Tools;Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) - For PLINTH BEAMS
9
-
117522
... More
Office cum Instrumentation Tools;Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) - For PEDESTALS
10
-
110450
... More
Office cum Instrumentation Tools;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Ready mix concrete from Batching Plant using 20mm size graded machine crushed hard Granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry, including superplastisizers @ 4% of weight of cement, placing with concrete Pump; including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as batching, laying concrete using concrete pump , curing etc., and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).FOR FOUNDATIONS.
12
-
125040
... More
Office cum Instrumentation Tools;b) Ground Floor
1
-
5509
... More
Office cum Instrumentation Tools;a) Stilt Floor
2
-
10742
... More
Office cum Instrumentation Tools;Plain Cement Concrete corresponding to M-15 grade as per IS 456 nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, all operational, incidental and labour charges such as mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, -PCC : M-15 MACHINE MIX
-
-
-
... More
Office cum Instrumentation Tools;b) Ground Floor
1
-
5857
... More
Office cum Instrumentation Tools;a) Stilt Floor
1
-
5643
... More
Office cum Instrumentation Tools;Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks for finished item of work. (APSS No. 402): HAND MIXING
-
-
-
... More
Office cum Instrumentation Tools;Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, all charges for mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No. 402) MACHINE MIXING
15
-
60630
... More
Office cum Instrumentation Tools;Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:4:8) NOMINAL MIX
4
-
16996
... More
Office cum Instrumentation Tools;Providing plinth protection with fly ash brick masonry in CM (1:6) on edge (115 mm width by 300 mm height),100 mm thick PCC(1:5:10) Prop. using 40 mm size HBG metal and on top 75 mm thick PCC M-20 (1:2:4) in panels of size not exceeding 1.5x1.5 mts and providing 5 mm thick glass strips between the panels and finishing the to surface to require smoothness and slopes including Grooves & thread lining as directed by the Engineer - incharge including cost conveyance of all materials to work site, labour charges, curing, excluding seigniorage charges sales and other taxes on all materials etc. complete for finished item of work
51
-
71910
... More
Office cum Instrumentation Tools;Pre construction Anti termite process by applying/ injecting into soil during early stage of building Construction Treatment of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the columns , plinth beams (Back filling) walls and floor junction, external perimeters, along retaining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around columns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for spraying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge(Plinth area measurements will be taken for payment
142
-
24566
... More
Office cum Instrumentation Tools;Filling with Carted Gravel in trenches, sides of foundations & basement from approved quarry consolidating deposited layer by watering and ramming, including all operational, incidental, labour charges, complete including cost and conveyance of sand / gravel for finished item of work. (APSS No 309 & 310).
40
-
23920
... More
Office cum Instrumentation Tools;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
65
-
3055
... More
Office cum Instrumentation Tools;Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS 20B (ApSS 308) in Ordinary Soil-Manual Means-Upto 3M depth
11
-
4631
... More
Office cum Instrumentation Tools;Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. a) up to 3.0 m depth
65
-
8645
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements