Professor Jayashankar Telangana State Agricultural University Tender

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;Supply, Transportation and Laying of XLR Male to Female Patch Cable of Length 10Mtrs of Make Belden/ Kramer/Aten/Equivalent with requied connectors and accessories etc complete

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;Supply, Transportation and Laying of Speaker Cable of Make Belden/ Kramer/Aten/Equivalent with requied connectors and accessories etc complete

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;Supply, Transportation and Installation of 4X2 HDMI Switcher: 4x2 4K60 4:2:0 HDMI Automatic Matrix Switcher Make: Kramer/ Equivalent, Resolutions up to UXGA and 4K x 2K, HDCP 1.4 compliant, Automatic switching (last connected/priority), Max. Resolution ? 4K@60Hz (4:2:0), Automatic Switching Modes ? Last connected and priority switching of Make: Kramer/Aten/equivalent make with requied connectors and accessories etc complete

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;Supply, Transportation and Installation of LCD, Business Projector, SBrightness (ANSI lumens) 4200 and above, Native Resolution WXGA, 1280 x 800, Native Aspect Ratio 16:10, Contrast Ratio (FOFO)16000:1, Display Color Upto 1.07 billion colours, Light Source Lamp Light Source Life Normal 6500 hrs, b. ECO 17000 hrs, Throw Ratio 1.38 - 2.24:1, Keystone Adjustment, Optical Zoom 1.6x optical zoom, Keystone Correction Auto vertical: ± 30 ° horizontal ± 30 °, I/O connectivity / Interface 3 in 1: Image / Mouse / Sound Interfaces USB 2.0 Type A, USB 2.0 Type B, RS-232C, Ethernet interface (100 Base-TX / 10 Base-T), Wireless LAN a/n (5GHz) (optional), VGA in (2x), VGA out, HDMI in (2x), Composite in, Stereo mini jack audio out, Stereo mini jack audio in (2x), Cinch audio in, 16Watt Speakers, LDC Projection System, Kensington lock, Control panel lock, Security cable hole, Wireless LAN unit lock, Password, protection, AV Mute Slide, Automatic keystone correction, Built-in speaker, Direct Power on/off, Document Camera Compatible, Easy OSD pre-setting, Horizontal and vertical keystone,correction, Network projection, OSD copy function, PC Free, Quick Corner, Split-Screen-Function, Wireless LAN capable, iProjecton set-up by QR code, Main unit, Remote control incl. batteries, Warranty card Quick Start Guide,Power cable,HDMI Cable 1.8m of Make: Epson/Sony/panasonic with required connectors and accessories etc complete

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;Supply, Transportation and Installation 6/ 8 Channel Mixer have 6 line inputs (2 mono, 2 stereo) and 2 microphone inputs with 48-volt phantom power and a high-pass filter for each channel, STEREO INPUT (LINE) 2, STEREO OUT 2, Robust, impact-resistant, powder-coated metal chassis, AC Adapter PA-130 (DC12V/1.0A) 120V/60Hz or MU18 (DC12V/1.5A) 100-240V 50/60Hz, Small-format Analog Mixing Console with USB I/O and Lexicon Effects, Discrete class A ?D-PRE? mic preamps with an inverted darlington circuit, Digital effects processors: 6 ?SPX? effects of Make: Yamaha/Soundcraft/Shure Equaivalent with required connectors and Accessories etc complete

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;Power shall be supplied to the handheld transmitter by two 1.5 V AA size batteries. Operating time shall be typically 12 hours with a battery pack and up to 8 hours with AA batteries. Occupied bandwidth shall be 200 kHz. Transmit power (radiated) shall be 10 mW ERP (1785.2 ? 1799.8 MHz Range: 12 mW ERP). The handheld transmitter shall have a rugged metal housing; dimensions shall be approximately 50 mm (1.97?) in diameter and 268 mm (10.55?) in length. The microphone head suitable for use with the handheld transmitter shall be a dynamic type with a cardioid pick-up pattern and a sensitivity of 2.1 mV/Pa. Maximum sound +H4pressure level shall be 154 dB SPL. Make: Senneheiser/Audac/AKG with Required Connectors and Accessories etc Complete

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;An auto-lock feature shall be provided to prevent settings from being accidentally altered. The receiver shall feature a balanced XLR-3M audio output with a maximum output of +18 dBu along with an unbalanced ¼? (6.3 mm) audio output with a maximum output of +12 dBu. Two BNC-type input sockets shall be provided for connecting the antennas. The receiver shall operate on 12 V power supplied from the power supply unit or from a Sennheiser EW-D ASA antenna splitter. Power consumption shall be = 300 mA. The receiver shall have a rugged metal housing; dimensions shall be approximately 212 x 44 x 189 mm (8.35? x 1.73? x 7.44?). Weight shall be approximately 1000 grams (2.2 lbs) without antennas and power supply. Operating temperature shall range from -10 °C to +55 °C (+14 °F to +131 °F). Handheld transmitter: The handheld transmitter shall be for use with a companion receiver as part of a digital wireless RF transmission system. The handheld transmitter shall operate within ten UHF frequency ranges, with a switching bandwidth of up to 56 MHz: 470.2 ? 526 MHz, 520 ? 576 MHz, 552? 607.8 MHz, 606.2 ? 662 MHz, 630 ? 662 MHz, 662 ?693.8 MHz, 823.2 ? 831.8 MHz, 863.2 ? 846.8 MHz, 925.2? 937.3 MHz, 1785.2 ? 1799.8 MHz; selectable frequencies shall be up to 2,240. The audio frequency response shall be between 20 Hz and 20 kHz (-3 dB) @ 3 dBfs. Audio total harmonic distortion (THD) shall be = -60 dB for 1 kHz @ -3 dBfs input level. Dynamic range shall be 134 dB. A programmable mute switch shall be provided to mute or unmute the audio signal

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;Supply, Transportation and Installation of Wireless Handheld Microphone, Rack receiver : The stationary receiver with switching diversity technology shall be for use with a companion transmitter as part of a digital wireless RF transmission system.The receiver shall operate within ten UHF frequency ranges, with a switching bandwidth of up to 56 MHz: 470.2 ? 526 MHz, 520 ? 576 MHz, 552 ? 607.8 MHz, 606.2 ? 662 MHz, 630 ? 662 MHz, 662 ? 693.8 MHz, 823.2 ? 831.8 MHz, 863.2 ? 846.8 MHz, 925.2 ? 937.3 MHz, 1785.2 ? 1799.8 MHz; selectable frequencies shall be up to 2,240. The receiver shall feature Bluetooth® Low Energy (BLE) at a frequency range between 2402 and 2480 MHz for remote controlling the devices via a control App for iOS and Android. The audio frequency response shall be between 20 Hz and 20 kHz (-3 dB) @ 3 dBfs. Audio total harmonic distortion (THD) shall be = -60 dB for 1 kHz @ -3 dBfs input level. Dynamic range shall be 134 dB. The receiver shall be menu-driven with a backlit LC display showing the current frequency, channel number, metering of RF level, metering of AF level, lock status, muting function, mute lock status, antenna switching diversity, app connection, gain, audio output level, menu and battery status of the associated transmitter

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;The bodypack transmitter shall operate within ten UHF frequency ranges, with a switching bandwidth of up to 56 MHz: 470.2 ? 526 MHz, 520 ? 576 MHz, 552 ? 607.8 MHz, 606.2 ? 662 MHz, 630 ? 662 MHz, 662 ? 693.8 MHz, 823.2 ? 831.8 MHz, 863.2 ? 846.8 MHz, 925.2 ? 937.3 MHz, 1785.2 ? 1799.8 MHz; selectable frequencies shall be up to 2,240. The audio frequency response shall be between 20 Hz and 20 kHz (-3 dB) @ 3 dBfs. Audio total harmonic distortion (THD) shall be = -60 dB for 1 kHz @ -3 dBfs input level. Dynamic range shall be 134 dB. A programmable mute switch shall be provided to mute or unmute the audio signal. The bodypack transmitter?s parameters shall be configurable in the associated receiver?s menu and synchronized with the bodypack transmitter via Bluetooth Low Energy (BLE). Power shall be supplied to the bodypack transmitter by two 1.5 V AA size batteries. Operating time shall be typically 12 hours with a battery pack and up to 8 hours with AA batteries. Occupied bandwidth shall be 200 kHz. Transmit power (radiated) shall be 10 mW ERP (1785.2 ? 1799.8 MHz Range: 12 mW ERP). The bodypack transmitter shall have a rugged metal housing; dimensions shall be approximately 63 x 80 x 20 mm (2.48? x 3.15? x 0.79?) without antenna. Make: Sennheiser/Shure/AKG with Required Connectors and Accessories etc Complete

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;The receiver shall be menu-driven with a backlit LC display showing the current frequency, channel number, metering of RF level, metering of AF level, lock status, muting function, mute lock status, antenna switching diversity, app connection, gain, audio output level, menu and battery status of the associated transmitter. An auto-lock feature shall be provided to prevent settings from being accidentally altered. The receiver shall feature a balanced XLR-3M audio output with a maximum output of +18 dBu along with an unbalanced ¼? (6.3 mm) audio output with a maximum output of +12 dBu. Two BNC-type input sockets shall be provided for connecting the antennas. The receiver shall operate on 12 V power supplied from the power supply unit or from a Sennheiser EW-D ASA antenna splitter. Power consumption shall be = 300 mA. The receiver shall have a rugged metal housing; dimensions shall be approximately 212 x 44 x 189 mm (8.35? x 1.73? x 7.44?). Weight shall be approximately 1000 grams (2.2 lbs) without antennas and power supply. Operating temperature shall range from -10 °C to +55 °C (+14 °F to +131 °F). Bodypack transmitter : The bodypack transmitter shall be for use with a companion receiver as part of a digital wireless RF transmission system

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;Supply, Transportation and Installation of Wireless Collar Microphone, Rack receiver : The stationary receiver with switching diversity technology shall be for use with a companion transmitter as part of a digital wireless RF transmission system. The receiver shall operate within ten UHF frequency ranges, with a switching bandwidth of up to 56 MHz: 470.2 ? 526 MHz, 520 ? 576 MHz, 552 ? 607.8 MHz, 606.2 ? 662 MHz, 630 ? 662 MHz, 662 ? 693.8 MHz, 823.2 ? 831.8 MHz, 863.2 ? 846.8 MHz, 925.2 ? 937.3 MHz, 1785.2 ? 1799.8 MHz; selectable frequencies shall be up to 2,240. The receiver shall feature Bluetooth® Low Energy (BLE) at a frequency range between 2402 and 2480 MHz for remote controlling the devices via a control App for iOS and Android. The audio frequency response shall be between 20 Hz and 20 kHz (-3 dB) @ 3 dBfs. Audio total harmonic distortion (THD) shall be = -60 dB for 1 kHz @ -3 dBfs input level. Dynamic range shall be 134 dB.

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;A green signal LED?s indicates the presence of an input signal and it?s level exceeding the -20 dB level, a clip LED indicating the channel operation at maximum level and a protection LED indicating any fault detected shall be provided for each channel. All connections shall be made on the rear panel of the unit. The signal input connections shall be balanced and performed using XLR connectors, including signal link-through connections. The output connections must be fitted with both Speakon compatible and terminal block connectors. The amplifier shall operate on a 100-240V AC - 50/60 Hz mains network and shall be equipped with a removable power cord having a standard shuko (CEE 7/7) AC plug. The connector on the amplifier chassis shall be a fused IEC C14 type. The amplifier chassis shall be a single rackspace steel constructed 19?? housing. Depth from mounting surface to rear supports shall be 330 mm and the weight shall not exceed 4.4 Kg. Make: Audac/Bose/Meyersound with Required Connectors and Accessories etc Complete

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;Supply, Transportation and Installation of 240Watts Mixing Amplifier oThe amplifier must be an energy efficient and compact dual channel Class-D power amplifier, containing two independent controllable amplifier channels with an output power of 2 x 250 Watt. Bridging the outputs shall be possible, merging the power to 500 Watt for a single load. The construction must be transformerless using Class-D amplifier technology and powered by a switching power supply. Each channel shall have integrated circuitry to protect against short-circuits or mismatched loads and over heating. The amplifier must be convection cooled so that maintenance can be kept to a strict minimum. An automatic signal detection circuit shall be implemented, switching the amplifier to standby mode when no input signal is detected. The energy efficiency levels shall comply with energy-star and other international energy and environmental requirement standards. The front panel shall contain an AC power switch accompanied by a blue power indicator LED and channel operation indicator LED?s.

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;The loudspeaker shall be a surface-mount 2-way type, consisting of a 5? woofer and 1? tweeter which are built in an ABS enclosure with finely perforated front grill and fitted with a line transformer allowing it to be used on both low impedance (8 Ohm) and 100 Volt distributed lines. It shall be vertically and horizontally mountable using the supplied mounting bracket. It shall have an RMS power handling of 50 Watt with a maximum power handling of 100 Watt and the frequency response (±3 dB) shall range from 70 Hz to18 kHz. The sensitivity shall be 87 dB when measuring with an input signal of 1 Watt at a distance of 1 meter, while the maximum continuous sound pressure level shall be 104 dB. The loudspeaker shall have an impedance of 8 Ohm, a 70/100V line transformer and a passive built-in crossover network with crossover frequency of 2.5 kHz. The transformer shall have multiple tappings for 40 Watt, 20 Watt and 10 Watt which are selectable, including the 8 Ohm bypass, using a rotary switch on the rear of the enclosure. The loudspeaker enclosure shall be 147 mm high, 212 mm wide and 136 mm deep and the weight shall not exceed 2.54 Kg. of Make: Audac/Bose/Meyersound with Required Connectors and Accessories etc Complete

Replacing of Audio Video System to Seminar Hall I andII at University Auditorium,PJTSAU Campus,Rajen;Item Detailed Specification Description