Professor Jayashankar Telangana State Agricultural University Tender

Extension of Pantry;S&F premium make CPVC Pipes of 22.20mm OD Pipe - SDR 13.5 (TBSP-J.III-02)

Extension of Pantry;Supplying & fixing 75 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm (TBSP-H.I-01)

Extension of Pantry;Supplying & fixing 3" (75 mm nominal size ) Nahany Trap with Jali - UPVC/SWR Pipe fittings (TBSP-H.II-73)

Extension of Pantry;Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm thick with accessories (TBSP-E.VI-13)

Extension of Pantry;Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation and applying 2 coats of plastic emulsion paint of approved brand and shade over a coat of primer including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for INTERNAL walls - including cost of access scaffolding for:-Internal Colouring - Providing Putty and 2 coats plastic emulsion paint over a coat of primer to Internal walls

Extension of Pantry;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black/ REGULAR colours set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of granite over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, granite slabs, white cement etc., to site (excluding cost of C.C. bed) cost of excluding seigniorage on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No.707 & 701)

Extension of Pantry;S/F of 30mm thick WPC (wood plastic composite) solid door shutter factory made including made including fixing of MS powder coating alum coating alum fixture such as 3nos. Butt hinges, 150mm ht, 1no, tower bolts 10mm long, 2nos alum long handles, 125mm long 1no aldrop 200mm long, including fixing the door shutter to frame for finished item of work (Rate as per Quotation approved by the Executive Engineer).

Extension of Pantry;Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast

Extension of Pantry;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows with mesh duly manufactured using UPVC reinforced profiles of 91 mm x 49 mm x 2.20 mm for outer frames, 62 mm x 41 mm x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with 30mm15mmx1.5mm with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm and the shutter of fly screen with fibre mesh shall be made of size 21mm x 58mm extruded uPVC window profile section of white colour having outer wall thickness of 2.2mm (± 0.3mm) provided with reinforcement of minimum 1.5mm thick G/J/U/S/O type GI section duly mitred cut and thermal welded at all corners and prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make & Glazing bead shall be coextruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

Extension of Pantry;Flooring with Vitrified tiles of Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with laticrete epoxy grout of pigment of approved shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) cost of excluding seigniorage on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No.707 & 701)

Extension of Pantry;Supplying, fitting and placing HYSD Fe 500 manufactured by Primary producers like TATA,SAIL,VSP, Jindal (as approved by Ministry of steel guidelines) of different diameters for RCC works complete, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)

Extension of Pantry;25mm thick shelves

Extension of Pantry;Supply and fixing of pre cast RCC Racks (1:1:2) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 6mm HGG chips, cement and sand for cupboard racks and platforms as per the approved design including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials including cost of centering charges and shuttering machine mixing, laying concrete in position, curing etc., & lift charges for finished item of work. (APSS No. 402)

Extension of Pantry;b) 75mm thick slab

Extension of Pantry;a) 125mm thick slab

Extension of Pantry;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for BEAMS & SLABS IN BUILDINGS Design Mix : M 20(Weigh Batch)

Extension of Pantry;Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:5) & (1:3): 12 mm

Extension of Pantry;Brick Masonry work in Adesive jointing mortar with Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 (landing cost - including cost of conveyance,loading & unloading) 600 x 200 x 230 mm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., complete for walls for Superstructure Walls.