Professor Jayashankar Telangana State Agricultural University Tender

Providing interiors, Electrical fixtures;Supply and fixing of 8 Way VTPN DB accomodating 125A 4 Pole MCCB as incomer and 8 Nos(40-63)A TP MCBs as outgoing and with IP 43 Protection of makes Legrand / Schneider. , including internal connections and labour charges for Flush Mounting etc., complete(conseling)

Providing interiors, Electrical fixtures;Supply,fixing and Transportation of 36W, 2' x2' (600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K 6500K as desired by the department, CRI >80, and THD is less than 15% etc., complete with 5 years warranty. LUMINAIRE MAKE : Phillips / OSRAM / GE / Crompton / Bajaj / Havells / Halonix / HPL / Syska / Surya. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.of mirror optic tube light luminaire in false ceiling/pop with necessary arrangment including giving connections and all labour charges etc.,complete

Providing interiors, Electrical fixtures;Supply,fixing and transportation of 18 W +/-10% back lit LED Down Light Recessed /Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / OSRAM / Wipro/ Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska /Eveready / Surya / Keselec / FIEM.LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM / SAMSUNG / LG LEDs...including all accessrioes and all labour charges etc.,complete.

Providing interiors, Electrical fixtures;Supply and fixing of 16A/6A 1 way Combi Socket Modular Socket ( Sockets combined 2 in one) with 20A 1 Way Modular Switch with indicator of Legrand Myrius / Million mway/Goldmedal Curve/ Anchor Roma viola /Havells Fabio / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana. make make with suitable cover frame and Modular box and earth connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B

Providing interiors, Electrical fixtures;Supply and fixing of 10A 3/2 pin 2 module modular Socket with 10A 1 Way 1 module Modular Switch of Legrand Myrius / Million mway /Goldmedal Curve/ Anchor Roma viola /Havells Fabio / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana make make with suitable cover frame and Modular box and earth connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B

Providing interiors, Electrical fixtures;Supply and Run of 5 of 86/0.3mm (6.00 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) /L&T / V-Guard (HFFR). make in existing pipe for run of mains inlcuding all labour charges etc., com

Providing interiors, Electrical fixtures;Supply and Run of 3 of 56/0.3mm (4.00 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) /L&T / V-Guard (HFFR)t. make in existing pipe for run of mains inlcuding all labour charges etc., com

Providing interiors, Electrical fixtures;Supply and Run of 3 of 36/0.3mm (2.50 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) /L&T / V-Guard (HFFR).. make in existing pipe for run of mains inlcuding all labour charges etc., com

Providing interiors, Electrical fixtures;Wiring with run of 2 of 22/0.3mm (1.50 Sq.mm) FRLS/HFFR PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) /L&T / V-Guard (HFFR) make in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with cover frame of ISI Mark Legrand Myrius / Million Tap-Wood/ Anchor Roma viola / Havells Fabio / C&S Prime / CPL Vysma / Benlo Vesta / Polycab Levana makes with required cover frame to be fixed with Modular box in existing surface / consealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete including cost and conveyance of all materials and all labour charges etc., complete for light and bell points in R.B

Providing interiors, Electrical fixtures;Supply and fixing of 25mm outer dia Heavy(1.50mm thickness) grade with IS:9537 part 3 regid PVC pipe makes Sudhakar / Finolex / Modi / VIP /Precision / Universal / Million Plast / Gold / Polycab / DEC / Beljin / Champion / along with reinforcement is concealed in wall with all required accessories including chiseling the wall whenever necessary including masonry work including all labour charges etc., complete and as directed by the department for fan point, light point and plug point including all labour charges.

Providing interiors, Electrical fixtures;Providing Antitermite treatment as per IS 6315 (Part-2) 2001 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly usingChlorpyriphos/ Lindane enulsifiable concentrate 20% with 1% concentration @ 7.5 Litres/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth around of 500mm around columns & 300mm deep around plinthe beams, basements & floor filling area including excavation channel along the wall & rodding etc. & conveyance of all materials to the site, cost of labour for spraying, rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc., complete for finished item of work as per the approved of the Engineer-in-Charge.

Providing interiors, Electrical fixtures;Providing Teak wood beedings of width 100mm (for skirting and top of wall panelling including polishing whereever necessary including costs and conveyance charges labour charges etc., complete

Providing interiors, Electrical fixtures;Providing and fixing 10 mm thick Acrylic / synthetic carpet (1000grm / 1sqm) of approved design and colour 6 mm thick foam under lay and stuck to the existing Cement flooring with synthetic adhesive solution , cost of all materials , labour charges etc. complete as directed by the dept.

Providing interiors, Electrical fixtures;Providing and fixing roller blinds aluminium alloy and control units shall be DELIN imported and runners shall be transparent acrulic with antification LOUVERS FABRIC shall be protectve coated stain resistant soil repellance as directed by the department.

Providing interiors, Electrical fixtures;Supplying and fixing of maple wood flooring using mill run gate / certified better grade maple wood as per drawing over the maple wood runners of size 70mm x 45mm placed at 350mm C/C over the polythene sheet acting as vapour barrior and fixing maple wood flooring 19mm thick including cost of maple wood flooring, runners, polythene sheet, fitting with steel pins and rubber shokers etc., complete including labour charges for laying strips, frizes for parquest flooring continuously shaped, tonged, grooved, rebratred, chamfered, rejointed, beeded moulded, rounded along any of its edges, ends or facer, etc., complete including cost and conveyance tax, duties,etc., complete for finished item of work including polishing the surface etc.,complete.EDR-31.

Providing interiors, Electrical fixtures;Supplying and Fixing of Channeled Wood works perforated panels or equilent of width 192mm, thickness of 16mm and length 2440 mm or as required by the Architect / approving engineer, made of a high density particle board substrate with a laminated facing as per the approved shade / species & finish and a melamine balancing layer on the reverse side and the boards shall have a special perforation pattern where the visible surface has a (?Helmholtz? fluted perforation of 3mm width and 21mm of visible panel ) each and the panels shall be provided a minimum sag resistance of RH90 and a fire rating class of 1 as per Part 7 of BS 476 and the edges of the panels shall be ?tongue-and-grooved? to receive special clips for installation, back of the perforated panel haveing sound absorbing non-woven acoustical fleece, panels shall be mounted on special aluminium keels by using clips provided by Armstrong or equilent and installation using wooden battens of section 20mmx18mm or as approved by the Architect on the solid MS Structure Vertically using screws and plugs at spacing of 1000mm centre-to-centre,screw the aluminium extruded keel for channelled wood works (GTPT001) over the lowest and second wooden batten at an on-center distance of 1000mm, install the first set of wooden panels by inserting the clips for border channelled woodworks (GTPT002) and insert the groove of the panel into the projecting flange of the aluminium clip,continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing clips for inside channelled woodworks (GTPT003) into the next keel till the actual height is achieved,use clips for border channelled wood works (GTPT002) to finish off the installation finish off the edges using wooden moulding of matching colour ,including cost and conveyance of all materials, ,labour charges & other taxes on all materials, inclusive of all Taxes etc., complete for finished item of work. and other charges etc., complete for finished item of work at site as per the directions of Engineer- in- Charge

Providing interiors, Electrical fixtures;Supplying and fixing Gyp Board Fine Line Grid false ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using 12.5 mm thick/ 9.5 mm thick Gyp Board sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm conforming to IS 2095 - 1982 fixing to Gyp steel Precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using pre-coated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanized spring steel level clip of PVC universal holding clips system at 1200 mm c/c and fixing the 12.5 mm / 9.5 mm Gypboard Sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm and finishing two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd specification.

Providing interiors, Electrical fixtures;Auditorium portion ceiling:- Providing & Fixing of Armstrong Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance =85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm, suitable for Green Building application, with Recycled content of 66% GW & 74% RW. The tile shall be laid on Armstrong Suprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.04 Kgs/M2 & minimum pull out strength of 100 Kgs.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres.