Professor Jayashankar Telangana State Agricultural University Tender

Painting to walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complet

Painting with 2 coats of approved synthetic enamel paint of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete

Dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, cost of excluding seigniorage on materials and all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed)cost of excluding seigniorage on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No.707 & 701)

Supply, Installation and commissioning approved make floor mounted Anglo Indian wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approvedmakeetc.completeforfinisheditemofwork in all respects: WhiteColour

S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter turn spindle internal / external threaded connection conforming to IS 8931

Supplying & fixing SINGLE BOWL stainless steel sink size 24"x18"x8 " (609.6 x 457.2 x 203.2mm) 1 mm thick with accessories

Supplying & Fixing Indian make white glazed vitreous china porcelain sink conforming to IS:2556-Part-5- 1994 on cantilever brackets with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting withparallelpipethreadconformingtoIS:2963-1979: 600 x 400 x250

S/F of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings

S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook

S&F CP finish steel towel rod of 600 mm long and 20 mm dia with brackets

S&F premium make CPVC Pipes of 22.20mm OD Pipe - SDR 13.5

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supplying and fixing the SS fly proof mesh for the windows and ventilators with alround frame made up of sal wood reepers of size 50mmx25mm alround including cutting the mesh to the required size, nailing the mesh to the wooden windows/ ventilators including fixing of the frame over the mesh including cost and conveyance of all the materials nails fixing charges etc., complete as directed by the department.

Providing doors and windows repairs including necessary fixture and all labour charges etc., complete.

Providing cupboard repairs including necessary fixture and all labour charges etc., complete.

S/F of Aluminium Aldrops (IS:2681) 200 mm long

S/F of Aluminium Tower Bolt-10 mm Bolt (IS:204) 150 mm Long

S/F of Aluminium Flat Latches: 200 mm long

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

S&F premium make CPVC Pipes of 34.90mm OD Pipe - SDR 13.5

Supply and Transportation of 1HP Single phase open well ISI submersible motor pumpset. Makes: Texmo / CRI / KSB / Aryan Varsha / Lubi

S & F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 32 mm NB Size

Providing 160 mm dia ISI marked PVC underground pipe of SN 2 KN/m2r of ISI marked including cost of necessary all other accessories and fixing in position including cost and conveyanace of all materials, sales and other taxes on materials to site, operational & incidental charges including all labour charges for fixing as site etc., and or finished item of work.

Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover

Fabrication and installation of Pleated Mosquito mesh for doors including necessary fixtures and all labour charges etc., complete.

Providing 110 mm dia ISI marked PVC down water take pipes with socket, 2.5 mm thick 4 kg/sq.cm pressure of ISI marked including cost of necessary PVC bends, shoes, iron/PVC clamps and all other accessories and fixing in position including cost and conveyanace of all materials, sales and other taxes on materials to site, operational & incidental charges including all labour charges for fixing as site etc., complete for finished item of work.

S&F CP finish brass soap dish

Fabrication, welding and erecting in position MS gate of approved design using 50x50x5mm MS angle box section for frame alround and wlelding with 40 x 6 mm MS flats for horizontals and 20 mm x 4 mm for internal design, 16 mm Sq. bars and 12 mm round bars for verticals spaced at 6" c/c alternately as per design, including welding bracing plates for all four comers with 4 mm thick MS plate. and 6" long CI moulded flowers on top of 16 mm bars, including making arrow shaped sharpened edge for 12 mm round bar on top, cost of all materials such as 2 nos x box type hinges with 18" long hold fasts, 1 no x 12" long x 25 mm dia aldrop, 1 no. x 18" long x 25 mm dia, tower bolt and fabrication, welding and erecting in position etc. complete

S/F of 75 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm

S/F of 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm