Professor Jayashankar Telangana State Agricultural University Tender

Repairs and Renovation;S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931 (TBSP-F.I-02)

Repairs and Renovation;Supplying and fixing of SWR PVC pipes (Prince/Sudhakar) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junction, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, the complete for finished item of work at all floor levels, (APSS No. 1302, 1319 & 1326)PVC / SWR pipes & fittings (as per ISI standards) 4 kg / cm2 mm dia PVC pipe (includes Stacks & Internal Toilets) 75mm dia Verticals

Repairs and Renovation;Supplying and fixing of SWR PVC pipes (Prince/Sudhakar) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junction, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, the complete for finished item of work at all floor levels, (APSS No. 1302, 1319 & 1326)PVC / SWR pipes & fittings (as per ISI standards) 4 kg / cm2 mm dia PVC pipe (includes Stacks & Internal Toilets) 110mm dia Verticals

Repairs and Renovation;Supply and fixing of PPR Ball Valve conforming to DIN Standards 8077/8092 20mm PPR ball valve TBSP-J.III-184

Repairs and Renovation;Supply and fixing of PPR Ball Valve conforming to DIN Standards 8077/8092 25mm PPR ball valve TBSP-J.III-185

Repairs and Renovation;Providing and placing on terrace (at all floor levels) polyethylene water tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and albour charges, overheads & contractors profit complete for finished item of work

Repairs and Renovation;Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) 22.20mm OD Pipe - SDR 13.5

Repairs and Renovation;Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) 28.60mm OD Pipe - SDR 13.5

Repairs and Renovation;Supplying, laying and fixing 0.50mm thick galvanized/ prepainted GI prefiled sheets fixed to the purlins with 14 size self drilling screws with neoprene valves side laps and sticted with self tapping/ drilling screws and laps are stiched to be sealed with 25mm x 3mm butyl tape the sheets are provided with anti capillary groves etc., complete for finished item of work and as directed by the department.

Repairs and Renovation;Providing Mild Steel Tubes & pipes of all diameters as per IS-1161, of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawing to be supplied at the time of execution of work, including cost and conveyance of all Mild steel Tubes & Pipes sections and all wastages such as overlaps, couplings, welede joints, etc., and all operational, incidental, Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in position, including cost of Labour charges for erecting & fixing all structural steel works like heavy iron grills, Trusses, Stanchions, Heavy Beams and Girders erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and cranes etc., complete in position etc. complete for finished item of work.

Repairs and Renovation;Painting with 2 coats of approved synthetic enamel paint over a coat of primer of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for:-Painting to wood work - Synthetic enamel paint over a coat of primer to New Iron Work - 2 coats + 1 coat primer

Repairs and Renovation;Painting to new walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - Acrylic emulsion paint 2 Coats + 1 Coat Primer = 3 Coats

Repairs and Renovation;Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:5) & (1:3): 12 mm

Repairs and Renovation;Brick masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,cost of excluding seigniorage on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Brick Masonry in CM 1:6 (Country)

Repairs and Renovation;Granolithic Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, sand and water etc., complete, excluding seigniorage charges, etc., complete for finished item of work

Repairs and Renovation;Plain Cement Concrete M-20 (1:2:4) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC M-20(1:2:4) NOMINAL MIX

Repairs and Renovation;Demolition and disposal of unserviceable materials within 100 metres lead - Unreinforced Cement concrete upto 15 cm thickness