Professor Jayashankar Telangana State Agricultural University Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 30,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
313862Bid Award Id
ViewTender No
02-11/PJTSAU/EO/TPA/TA/2022-23, Dt: 23-04-2022Tender Authority
Professor Jayashankar Telangana State Agricultural University ViewPurchaser Address
-Website
http://https://pjtsau.edu.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Office Building;Supply and Transportation of 3.0 TR 4 Star capable of delivering 30000 BTU/hr and above with operating on refrigerant R-32 / R-410 Makes : Blue Star / Carrier / Hitachi Non - Inverter Cassette type AC unit with ceiling mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units etc complete with Wireless remote controller, but without refrigerent piping and cable with 2 years warranty and annual maintenance contract.
2
-
278130
... More
Office Building;Supply and fixing of 24 Port manageble switches Makes : CISCO / Net Gear / HP / D link
3
-
20451
... More
Office Building;Supply and installation of IP 20, IK 08 24U floor 600mm Width x 800mm Deep Floor mounting net work rack with all accessories like front and rear doors, fans, castors, cable manager, shelf, power distribution unit, hardware packet. Mod cap floor stand : Modular construction of the rack made of 4 vertical , 4 Horizontal and 4 depth alloy extruded multi folded hallow profiles bolted and joined together with links and corner blocks. 3 Pairs of support channels to equate the load evenly and castor provision at bottom side.Painting shade : Combination of RAL 7035 / 7037 fine texture - 60 to 80 microns. or RAL 9005 fine texture - 60 to 80 microns complies with standards : UL 2416, Din 41494, IEC EN 60529, IEC EN 62262, IEC EN 60068-2-11, ISO 9001-2008. Makes : HCL / VAL / Rittal / APW.
1
-
44174
... More
Office Building;Supply, Transportation and laying PVC armoured under ground cable of size 3.5 Core 120.00 Sqmm 1100V grade of makeTorrent / Unicab / Universal /Polycab / Havells / Gloster / KEI / Finolex/ Paragon with ISI mark standard / Solid alluminium conductor etc., complete by making trench in all soils up to 0.90Mtr deep and filling the Sand at the bottom of trench before laying the cable and emmbedding the cable complete on sand layer and bricks placed on top of the cable width wise all over the run and back filling the exacavated earth without stones and making the surface proper with 15cm crown on the top duly providng root indicators at every 8 Mtrs embeded in CC as per IS 1255 and as directed by the department including cost and conveyance of all materials and labour charges etc., complete
120
-
148680
... More
Office Building;Supply, Transportation and laying PVC armoured under ground cable of size 4 Core 16.00 Sqmm 1100V grade of make Torrent / Unicab / Universal /Polycab / Havells / Gloster / KEI / Finolex / Paragon with ISI mark standard / Solid alluminium conductor etc., complete by making trench in all soils up to 0.90Mtr deep and filling the Sand at the bottom of trench before laying the cable and emmbedding the cable complete on sand layer and bricks placed on top of the cable width wise all over the run and back filling the exacavated earth without stones and making the surface proper with 15cm crown on the top duly providng root indicators at every 8 Mtrs embeded in CC as per IS 1255 and as directed by the department including cost and conveyance of all materials and labour charges etc., complete
260
-
111280
... More
Office Building;Supply and fixing of Automatic Street Light Control System with Optical Sensor, Low volatage / High voltage trip and reset operating voltage 150 - 280V AC, 50 HZ with suitable SMC enclousure of IP 54 protection, MCBs of Legrand / Schneider /L&T / Siemens of 10KA C/D curve and Contactor suitable to control the load of 5 KW Single phase load with necessary clamping arrangements.Makes : Swadeep Nature Switch / Light Mate / L&T / Siemens / Bajaj
1
-
13407
... More
Office Building;Fabrication, Transportation and supply of 1.5 Mtr Length single Arm standard Bracket made with MS galvanized 50mm dia Pipe.Makes: BAJAJ / VALMONT / TRANSRAIL/ SKIPPER / UTKARSH / LAASMA / CONSOUL
13
-
25402
... More
Office Building;Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly provided 4 Nos foundation bolts with nuts with providing of 0.45Mtrx0.45Mtrsx1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement as directed by the field engineers during execution including centering, decentering, water curing as required, soil exacavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance of materials etc. complete.
13
-
69862
... More
Office Building;Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including chain for anti theft mechanism, supply of suitable boards with bakelite sheet, din channel for MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for7.50 Mtrs height Pole having dimensions Bottom 130mm, Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700mm long 'J' bolts along with template or equivalent. Makes: BAJAJ / VALMONT / TRANSRAIL / SKIPPER / UTKARSH / LAASMA / CONSOUL
13
-
177242
... More
Office Building;Supply ,transportation and fixing of 90W +/-10% LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >100 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Wipro /Jaquar / Eveready / Halonix / Keselec /HAVELLS / POLYCAB / SURYA / SYSKA /Capart / Fortune Art / FIEM / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM / SAMSUNG / LG LEDs.including all connections and all labour charges etc.,complete.
13
-
129220
... More
Office Building;Supply and fixing of Cat 6 RJ-45 information outlets including duel face plate. including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B
10
-
5070
... More
Office Building;Supply and fixing of LAN Cable cat - 6 UTP cable of Makes : D Link / AMP / Molex / Legrand / Krone. including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B
450
-
16200
... More
Office Building;Supply and run of 25mmx3mm copper strip including cost of all accessories and labour charges etc.,complete
60
-
34020
... More
Office Building;Supply, Transportation and Fixing of 9" (225mm) light duty exhaust fan with wire guard etc complete of makes Crompton / Havells Ventilair-DB /Orient hill air Make exhaust / Fresh Air fan with metallic body and blades including making hole in wall and masonary work and all labour charges etc., complete.
16
-
38768
... More
Office Building;Supply of 7.0W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base, 490 Lumens.Makes: Phillips / OSRAM / GE / Crompton / VIN /Bajaj / Havells / Pharox / Halonix / Green lites.
20
-
2900
... More
Office Building;Supply and fixing of Anchor/Gold Medal Olive/million Zoom make ISI mark batten holder / angle holder on existing block, but without bulb including all connections etc., complete (For replacement)
20
-
1880
... More
Office Building;Providing earth electrode of low carbon steel rod, UL listed of 17.2 mm dia, 3 Mtr long, coated with copper of 254 microns thickness, CPRI tested for short time current withstand test of 25 kA, coating thickness, environmental test (Salt Mist Test), Bend test, Tensile strength, Yield /tensile ratio, Electrical Resistivity test,complete with clamps and 2 bags of Earthplus ULTRA high grade earthing compound IEC 62561-7 complaint Ecofriendly,Maintenance free, anti corrosive, lead-free, super conductive, mineral based high-grade earthing compound, to enhance soil conductivity. With resistance <0.20 ohms-meter, should be leach proof & sulphur free complete with earth inspection chamber of dimensions : Width :320 mm x 320 mm, Height : 192 mm, Weight : 30 Kgs, Load bearing capacity :5000 Kgs including drilling of bore in any kind of soil.
2
-
33702
... More
Office Building;Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through flange with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
2
-
18790
... More
Office Building;Supply and fixing of 8 Way VTPN DB accomodating 125A 4 Pole MCCB as incomer and 8 Nos(40-63)A TP MCBs as outgoing and with IP 43 Protection of makes Legrand / Schneider. , including internal connections and labour charges for Flush Mounting etc., complete
1
-
39655
... More
Office Building;Supply and fixing of 12 way SPN DB Harizontal with IP-43 Protection makes Legrand/Schneider suitable for with 1No 40A DP isolator and 12Nos 6-32A 10KA SP MCB,C/D Curve ISI Mark of make Legrand/Schneider , including internal connections and labour charges for Flush Mounting etc., complete(Conseling)
2
-
13592
... More
Office Building;Supply and fixing of (8+12) 4 way TPN DB Harizontal with IP-43 Protection makes Legrand/Schneider suitable for with 1No 100A FP isolator and 12Nos 6-32A 10KA SP MCB,C/D Curve ISI Mark of make Legrand/Schneider , including internal connections and labour charges for Flush Mounting etc., complete.
4
-
37992
... More
Office Building;Supply and fixing of Legrand/Schneider make DB with 32A TP plug and socket in SS enclosure with (6-32)A TPMCB,C/D curve of including internal connection and labour charges for Flush Mounting etc., complete.
4
-
19112
... More
Office Building;Supply and fixing of Legrand/Schneider make DB with 1 No 20A single phase plug and Socket, in sheet steel enclosure with 1 No 10A to 20A 10 KA SP MCB including internal connection and labour charges for Flush Mounting etc., complete
8
-
16776
... More
Office Building;Supply,fixing and Transportation of 36W, 2' x2' (600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K 6500K as desired by the department, CRI >80, and THD is less than 15% etc., complete with 5 years warranty. LUMINAIRE MAKE : Phillips / OSRAM / GE / Crompton / Bajaj / Havells / Halonix / HPL / Syska / Surya. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.of mirror optic tube light luminaire in false ceiling/pop with necessary arrangment including giving connections and all labour charges etc.,complete
20
-
88520
... More
Office Building;Supply,fixing and transportation of 18 W +/-10% back lit LED Down Light Recessed /Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / OSRAM / Wipro/ Crompton / Havells / Jaquar / IB LED / Panasonic / Halonix / Syska /Eveready / Keselec / FIEM.LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM / SAMSUNG / LG LEDs...including all accessrioes and all labour charges etc.,complete.
25
-
58475
... More
Office Building;Supply,fixing and Transportation of 10W,1000 lumens, 600mm length LED batten tube light, housing made with PC body, wide operating voltage with Single /double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K -6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc complete with 5 years warranty with BIS Certification.LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro / Crompton / Havells / Jaquar / IB LED / Panasonic /Halonix / Syska / Eveready /Keselec.LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM / SAMSUNG / LG LEDs. including all accessories and labour charges etc complete
20
-
15500
... More
Office Building;Supply,fixing and Transportation of 22W, +/ 10% , >/ 2300 lumens, 1200mm length LED light housing made with alluminium anodised body, wide operating voltage with PF=0.9, Surge protection: >2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI=80 etc., complete with 5 years warranty with BIS certification with BIS Certification.LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Crompton /Havells / Jaquar / IB LED / Panasonic /Halonix /Syska / Eveready .LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM / SAMSUNG / LG LEDs including all accessories and labour charges etc complete
50
-
55800
... More
Office Building;Supply & Fixing of Electronic step type Fan Regulator.Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal GIFA /GM-Zenova/ L&T- Englaze including 2 way module box and Cover frame including all accessories and labour charges etc complete
20
-
13080
... More
Office Building;Supply, Transportation and Fixing of energy efficient decorative fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle kit, safety rope, copper winding, Power Factor greater than 0.90,Service Value (CMM/W) greater than 8.5,Air delivery minimum 235 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%, remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., complete.Makes :Atomberg (Efficio + ) / Havells / Orient including all labour charges etc., complete.
20
-
72760
... More
Office Building;Supply and fixing of 16A/6A 1 way Combi Socket Modular Socket ( Sockets combined 2 in one) with 20A 1 Way Modular Switch with indicator of Legrand Myrius /Goldmedal Curve/ Anchor Roma viola /Havells Fabio / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana. make make with suitable cover frame and Modular box and earth connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B
50
-
29050
... More
Office Building;Supply and fixing of 10A 3/2 pin 2 module modular Socket with 10A 1 Way 1 module Modular Switch of Legrand Myrius /Goldmedal Curve/ Anchor Roma viola /Havells Fabio / Panasonic Vision / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana make make with suitable cover frame and Modular box and earth connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B
35
-
16940
... More
Office Building;Supply and Run of 5 of 140/0.3mm (10.00 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) /L&T / V-Guard (HFFR). make in existing pipe for run of mains inlcuding all labour charges etc., com
70
-
38500
... More
Office Building;Supply and Run of 3 of 86/0.3mm (6.00 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) /L&T / V-Guard (HFFR). make in existing pipe for run of mains inlcuding all labour charges etc., com
40
-
9480
... More
Office Building;Supply and Run of 5 of 86/0.3mm (6.00 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) /L&T / V-Guard (HFFR). make in existing pipe for run of mains inlcuding all labour charges etc., com
70
-
26040
... More
Office Building;Supply and Run of 5 of 56/0.3mm (4.00 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) /L&T / V-Guard (HFFR)t. make in existing pipe for run of mains inlcuding all labour charges etc., com
90
-
22950
... More
Office Building;Supply and Run of 3 of 56/0.3mm (4.00 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) /L&T / V-Guard (HFFR)t. make in existing pipe for run of mains inlcuding all labour charges etc., com
650
-
108550
... More
Office Building;Supply and Run of 3 of 36/0.3mm (2.50 Sq.mm) + Run of 2 of 22/0.3mm(1.50sqmm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) /L&T / V-Guard (HFFR).. make in existing pipe for run of mains inlcuding all labour charges etc., com
510
-
73950
... More
Office Building;Wiring with run of 3 of 22/0.3mm (1.50 Sq.mm) FRLS/HFFR PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) /L&T / V-Guard (HFFR) make in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with cover frame of ISI Mark Legrand Myrius / Million Tap-Wood/ Anchor Roma viola / Havells Fabio / C&S Prime / CPL Vysma / Benlo Vesta / Polycab Levana makes with required cover frame to be fixed with Modular box in existing surface / consealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete including cost and conveyance of all materials and all labour charges etc., complete for light and bell points in N.R.B
20
-
15940
... More
Office Building;Wiring with run of 2 of 22/0.3mm (1.50 Sq.mm) FRLS/HFFR PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) /L&T / V-Guard (HFFR) make in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with cover frame of ISI Mark Legrand Myrius / Million Tap-Wood/ Anchor Roma viola / Havells Fabio / C&S Prime / CPL Vysma / Benlo Vesta / Polycab Levana makes with required cover frame to be fixed with Modular box in existing surface / consealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete including cost and conveyance of all materials and all labour charges etc., complete for light and bell points in N.R.B
95
-
63650
... More
Office Building;Supply and fixing of 25mm outer dia Heavy(1.50mm thickness) grade with IS:9537 part 3 regid PVC pipe makes Sudhakar / Finolex / Modi / VIP /Precision / Universal / Million Plast / Gold / Polycab / DEC / Beljin / Champion / along with reinforcement is concealed in wall with all required accessories including chiseling the wall whenever necessary including masonry work including all labour charges etc., complete and as directed by the department for fan point, light point and plug point including all labour charges.
620
-
57660
... More
Office Building;Supply and fixing of 25mm outer dia Heavy(2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe makes Sudhakar / Finolex / Modi / VIP /Precision / Universal / Million Plast / Gold/ Polycab / DEC / Beljin / Champion. along with reinforcement is concealed in Roof Slabs with all required accessories including chiseling the wall whenever necessary including masonry work including all labour charges etc., complete and as directed by the department for fan point, light point and plug point including all labour charges.(for Slabs)
420
-
42840
... More
Office Building;160 mm dia 3 M Double Socket PVC/SWR pipe 6 Kg/sq.cm
12
-
8472
... More
Office Building;Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber(catch basin) up to 914.4 mm(3'0") and fitted with light weight 457.2 mm x 457.2 mm1'6"x1'6") C.I frame and cover of 20 Kg.
3
-
13239
... More
Office Building;a) 110mm
6
-
5700
... More
Office Building;Supply, fixing of rain water currah leaf trap, grating side wall mounted type as shown in the drawing. The rate shall include of fixing with all the necessary materials. ( SUPREEM)
-
-
-
... More
Office Building;a) 110 mm dia 3 M Single Socket PVC/SWR pipe 6 Kg/sq.cm
12
-
3720
... More
Office Building;Supplying, laying, jointing and testing of PVC / SWR pipes of approved make of 4 kg/cm2 confirming to is:13592-1992, including labour charges for laying, fixing, and commissioning the PVC pipes including couplers/ bends/tees etc., including fixing neccessary fittings like bends plugs, couplers, junctions, tees etc. jointing with solvent cement including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 0.91m depth and refilling with excavated soils, watering, tamping, cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.
-
-
-
... More
Office Building;160 mm dia 3 M Double Socket PVC/SWR pipe 6 Kg/sq.cm
12
-
8472
... More
Office Building;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS -4111: Part-1:1986 with cement mortar(1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5N/sq.mm including plastering with cement mortar 1:3prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pitsup to a depth of 1524 mm (5'-0") in all sorts of soils(excluding rock) and laying cement concrete (1:4:8) 150mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benchingand channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement,sand, bricks, water etc., to site, cost of seigniorage chargeson all materials and all incidental and operational, labourcharges like mixing cement mortar, constructing masonry,lift charges, curing etc., complete for finished item of workas per Standard specification.
1
-
13480
... More
Office Building;Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM1:6 prop. Masonry. Inspection chamber up to 914.4 mm( 3'0") and fitted with light weight 457.2 mm x 457.2 mm1'6"x1'6") C.I frame and cover of 20 Kg.
2
-
8826
... More
Office Building;Constructing Brick masonry chamber over the gully trap or peet valve and fitted with 304.8 x 228.6 m size CI frame and hinged cover.
3
-
1638
... More
Office Building;b) 50 mm dia prn +ur internal
19
-
2660
... More
Office Building;a) 40 mm dia
24
-
2400
... More
Office Building;Supplying , installing , testing and commissioning approved make u P V C pressure pipes ( 6 kg/sqcm)conforming to IS 4985 for waste drainage system including necessary fittings, fixing and jointing material all leads and lifts complete.
-
-
-
... More
Office Building;b) 110 mm dia 3 M Single Socket PVC/SWR pipe 6 Kg/sq.cm
34
-
10540
... More
Office Building;a) 75 mm dia 3 M Single Socket PVC/SWR pipe 6 Kg/sq.cm
42
-
6846
... More
Office Building;Supplying, laying, jointing and testing of PVC / SWR pipes of approved make of 6 kg/cm2 confirming to is:13592-1992, including labour charges for laying, fixing, and commissioning the PVC pipes including couplers/ bends/tees etc., including fixing neccessary fittings like bends plugs, couplers, junctions, tees etc. .( internal Toilet +Shaft)
-
-
-
... More
Office Building;Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM1:6 prop. Masonry. Inspection chamber up to 914.4 mm( 3'0") and fitted with light weight 457.2 mm x 457.2 mm1'6"x1'6") C.I frame and cover of 20 Kg.
1
-
4413
... More
Office Building;50mm dia (Flanged end)
1
-
2500
... More
Office Building;Supply and fixing in position, the following 'Y' Strainer with necessary unions, bolts,nuts etc complete. (Near OHT )
-
-
-
... More
Office Building;S & F Bronze Gate/ Globe valve as per IS 778 Class I,Indian make heavy type -50 mm NB Size
1
-
3896
... More
Office Building;S & F Bronze Gate/ Globe valve as per IS 778 Class I,Indian make heavy type -40 mm NB Size
1
-
2656
... More
Office Building;S & F Bronze Gate/ Globe valve as per IS 778 Class I,Indian make heavy type -32 mm NB Size
1
-
1969
... More
Office Building;S & F Bronze Gate/ Globe valve as per IS 778 Class I,Indian make heavy type -25 mm NB Size
3
-
3885
... More
Office Building;S & F Bronze Gate/ Globe valve as per IS 778 Class I,Indian make heavy type -20 mm NB Size
4
-
3604
... More
Office Building;f) S&F premium make CPVC Pipes of 54.00mm OD Pipe SDR 11
45
-
26415
... More
Office Building;e) S&F premium make CPVC Pipes of 41.30mm OD Pipe SDR 11
10
-
4030
... More
Office Building;d) S&F premium make CPVC Pipes of 34.90mm OD Pipe SDR 11
20
-
6500
... More
Office Building;c) S&F premium make CPVC Pipes of 28.60mm OD Pipe SDR 11
25
-
5975
... More
Office Building;b) S&F premium make CPVC Pipes of 22.20mm OD Pipe SDR 11
40
-
7960
... More
Office Building;a) S&F premium make CPVC Pipes of 15.90mm OD Pipe SDR 11
55
-
9020
... More
Office Building;Supply and fixing - SDR 11 Ashirvad / Astral or equivalent premier CPVC pipes and fittings to meet the requirements of ASTM-D2846 and are produced in cts (copper tube sizes 1/2" to 2") Ashirvad flow guards SDR 11 made from identical CPVC compounds having the same physical properties for hot and cold water (is 15778-2007) including cost and conveyance of pipe & its fittings and all materials to site, labour charges etc., complete for finished item of work.(fws+dws internal toilets + shaft)
-
-
-
... More
Office Building;Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm
7
-
3766
... More
Office Building;S&F of Chromium plated finish stainless steel body Toilet paper holder with 10 years warranty
5
-
4585
... More
Office Building;S&F Stainless steel 4" dia round Grating with frame for nahany or floor trap cover with or without hole
13
-
871
... More
Office Building;S & F 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931 (Wash Bain & HF)
10
-
2490
... More
Office Building;S&F of 15 mm Stainless steel flexible hose 1.0 m long forhand shower / health faucet with brass nuts
5
-
1340
... More
Office Building;S&F CP finish brass bottle trap 190mm long with wall connection pipe & wall Flange
7
-
7021
... More
Office Building;Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P.Spreader fixed with screws complete Indian make : 590 x375 x 390 mm
2
-
5915
... More
Office Building;S&F CP finish brass body 32 mm dia nominal size waste coupling with half/ full thread & brass body check nut andchain & plug conforming to IS 2963: 1979
7
-
1877
... More
Office Building;Supplying & Fixing Indian make below counter Wash Hand Basin 1st quality with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe threadconforming to IS:2963-1979 and fitted with 15 mm nominalbore Chromium Plated Pillar Tap of 1st quality Indian make400 grams Seiko/ Senior/ Nice/ Esso or equivalentcomplete with standard CI brackets including wooden blockwith single CP pillar cock
7
-
28273
... More
Office Building;Supply, Installation and commissioning approved makewash down wall mounted EWC conforming to IS:2556 (Part16)-2002 with 'P' or 'S' trap with concealed flush cistern fixed in wall with all internal parts of dual flush cistern,ultra solid seat cover of approved make with rubber bufferand cap all of approved make etc. complete for finished itemof work in all respects: Coloured Grade-I & II
5
-
65687
... More
Office Building;Painting to new wood work with luppam finish to give even & smooth surface and painting two coats with synthetic enamel paint 1st grade of approved brand and shade having VOC (Volatile organic compound) content less than 50 grams/liter over wood primer coat, including cost and conveyance of all materials to site, all labour charges , including sand paper on lappam coats for neat even and glossy surface, including cost of overheads & contractors profit, etc. complete for finished item of work as directed by Engineer-in-charge during exection - for all floors.
2
-
484
... More
Office Building;Painting to new Internal walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. and cost of overheads & contractors profit complete for finished item of work as per SS 912 .
49
-
6419
... More
Office Building;Providing and applying Exterior grade Texture ready mixed paint with sand texture added sand particles Acrylic copolymers and mineral compounds, bactericides and various additives or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation and applying 2 coats of weather proof exterior emulsion paint of approved brand and shade over a coat of primer including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - including cost of access scaffolding for:-External Colouring - Providing Texture and 2 coats weather proof exterior emulsion paint over a coat of primer to External walls
183
-
75579
... More
Office Building;including cost of Alluminm fixtures of 1 No tower bolt of 150x10mm dia, 1 No. Aldrops - 250 mm long and 2 Nos. handles of 125 mm size, including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002
-
-
-
... More
Office Building;Supplying and fixing of door with Medium Teak wood Frame of 100x65 mm including 6 Nos. of standard legs made from flat/ steel strips not less than 1.60 mm thick including base tie of section 50 mm x 25 mm (minimum) pre-fixed hinges of size 150 mm ? 3 Nos. for single shutters with one side fixed to frame for fixing shutters and Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 30 mm thick conforming to IS:2202 including providing & fixing of 1.20 mm PVC sheet to the full height of shutter including cost of Stainless Steel fixtures of 1 No tower bolt of 150x10mm dia, 1 No. Aldrops - 250 mm long and 2 Nos. handles of 125 mm size, including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002
2
-
10356
... More
Office Building;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).
200
-
116000
... More
Office Building;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)
183
-
99186
... More
Office Building;Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contractors profit etc., complete for finished item of work. (APSS No. 501 & 504).
10.34
-
85936
... More
Office Building;Providing and Fixing of Edge Trim including all charges
19
-
6821
... More
Office Building;Providing and Fixing of TR60+ 1.00mm thk JSW Structural Metal Decking
20.4
-
26908
... More
Office Building;Extra for providing and applying of enamel paint of approved brand and manufacture on steel works for two or more coats to give the smooth and even shade including scafolding and staggings and tools etc., all complete as per the engineer in charge directions.
1.57
-
7552
... More
Office Building;Fabrication and erection in position structural steel work in built up sections, rolled steel sections, trusses and framed work including cutting, hoisting fixing in position and applying zinc chromate primer to exposed surfaces of steel etc., complete as per specification and as directed. (Grade 345 Mpa & 310 Mpa Hot rolled sections
1.57
-
205121
... More
Office Building;Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)
0.1
-
8563
... More
Office Building;Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Lintels
0.1
-
1441
... More
Office Building;i) Deck Slab 150 mm thick at Trough & 90 mm at Ridge (Avg 120 mm Thk)
21
-
22071
... More
Office Building;Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
-
-
-
... More
Office Building;Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks for finished item of work. (APSS No. 402): HAND MIXING
0.1
-
582
... More
Office Building;Supply and Fixing of Cement Bonded Board conforming to IS:14862-2000 - 6mm Thick including cost& conveyance, all labour charges, necessary screws etc completing for encasing Structural steel columns including cost, conveyance, all fixtures & all labour charges etc
79
-
43529
... More
Office Building;Supplying and fixing Aluminum composite cladding with skin material 0.50 mm thick aluminum sheet cover material natural polyethylene aluminum cladding panel fixed with extruded aluminum basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including cost & conveyance of all materials, all Taxes, all incidental, operational and Labour charges etc for finished item of work but excluding cost of structural steel fabrication, scaffolding charges, if any, ACP Cladding - 4 mm thick, overheads & contractors profit etc ., complete for finished item of work.
10
-
33190
... More
Office Building;Supply and Fixing of Rabbit wire mesh (chicken mesh) of not less than 30 gauge including cost & conveyance, all labour charges, screws, nails, bindung wire etc
52
-
1144
... More
Office Building;Supplying and fixing stainless steel works such as raling, hand rail, grills etc., using Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & Diameters for - 304 Grade as per the approved drawing including cost and conveyance of all materials to site, Labour charges for Fabrication of stainless steel works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish, overheads & contractors profit etc ., complete for finished item of work.
98.4
-
64747
... More
Office Building;Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat, overheads and contractors profit, etc. complete for finished item of work as per Idia Gypsum Ltd specification.
141
-
147204
... More
Office Building;Supplying and fixing 16 mm - Mineral Fibre Sheet Grid Line False Ceiling of Tegular Edge 600 x 600 of Board / Tegular/ Micro look Edge tiles with a Humidity Resistance of 90% RH, Average NRC 0.60, Light Reflectance >80%, Thermal Conductivity ? = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1; fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC universal holding clips system at 1200 mm c/c and fixing the 14mm Mineral Fibre Sheet of size 600 x 600 mm in position and finishing two coats of drywall topcoat including overheads & contractors profit, etc. complete for finished item of work.
47
-
55695
... More
Office Building;Painting with 2 coats of approved synthetic enamel paint over a coat of primer of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for:-Synthetic enamel paint over a coat of primer to New Iron Work - 2 coats + 1 coat primer
29
-
4930
... More
Office Building;Painting to new wood work with luppam finish to give even & smooth surface and painting two coats with synthetic enamel paint 1st grade of approved brand and shade having VOC (Volatile organic compound) content less than 50 grams/liter over wood primer coat, including cost and conveyance of all materials to site, all labour charges , including sand paper on lappam coats for neat even and glossy surface, including cost of overheads & contractors profit, etc. complete for finished item of work as directed by Engineer-in-charge during exection - for all floors.
9
-
2178
... More
Office Building;Providing and applying Exterior grade Texture ready mixed paint with sand texture added sand particles Acrylic copolymers and mineral compounds, bactericides and various additives or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation and applying 2 coats of weather proof exterior emulsion paint of approved brand and shade over a coat of primer including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - including cost of access scaffolding for:-External Colouring - Providing Texture and 2 coats weather proof exterior emulsion paint over a coat of primer to External walls
182.6
-
74501
... More
Office Building;Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation and applying 2 coats of plastic emulsion paint of approved brand and shade over a coat of primer including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for INTERNAL walls - including cost of access scaffolding for:-Internal Colouring - Providing Putty and 2 coats plastic emulsion paint over a coat of primer to Internal walls
528
-
225984
... More
Office Building;Providing and fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated base steel as per IS 513 of ?D? quality, galvanized as per IS 277 and the glass holding section made of 304 grade stainless steel of 0.58 mm thick galvanized steel section as stiffeners inside the colour coated steel powder coated sections as per the design requirement & calculations to suit wind pressures as given in IS: 875, the primer coat with epoxy primer, finish painted with a polyester paint or powder coated with pure polyester powder and the vertical section of 50 mm x 99 mm x 0.72 mm, 33 mm x 56 mm x 0.72 mm for frame horizontal section, stiffener section of 47 mm x 97 mm x 1 mm, cover profiles sections of 20 mm x 58 mm x 0.58 mm, glass holding section of 37 mm x 37 mm & 37 mm x 18 mm including fixing 5mm thick Ocean Blue reflective glass, brackets made of CRCA powder coated/Electroplated to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement and EPDM gasket, U.V. resistant silicon sealant including fixing in concrete/masonry wall with self- expanding cap & screws inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and fixing charges excluding scaffolding complete for finished item of work.
18
-
151437
... More
Office Building;Supplying and fixing ornamental MS Grills including fabrication and erection in position using alround frame of 25mm X 5mm MS flat welded with 10mm square bars placed at 5" c/c Hor, 10" c/c ver fixed in both horizontal and vertical directions including cost and conveyance of all materials to work site and all operational, incidental labour charges, power charges, overheads & contractors profit etc., complete for finished item of work.
21.6
-
30802
... More
Office Building;Supply & Fixing 12 mm thick Toughened Glass Frame less partition with C Channel in Floor & top wooden support in Falsec ceiling etc including all fixtures for rigid support etc.
46.8
-
120884
... More
Office Building;Providing wooden paneling 12 mm thick prelaminated particle board fixed on wooden frame of BT wood size 50.8 mm x 25.4 mm (2"x1") at distance of 609.6mm (2'-0") intervals of both ways providing 3/4" x 1/2" (19.05 mm x 12.7 mm) size BT wood ornamental cover beading and necessary screws, synthetic glue, including cost of overheads and contractor's profit complete for finished item of work.
50
-
102800
... More
Office Building;Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm.,including provision for Exhaust, cost and conveyance of all materials, accessories, labour charges for transportation, erection at site, including overheads and contractor profit etc.,complete for finished item of work.
2
-
13864
... More
Office Building;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter ? (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
10.8
-
83192
... More
Office Building;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co- extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. 1 ,
10.8
-
79672
... More
Office Building;S/F of 30mm thick WPC(wood plastic composite) solid door shutter factory made including made including fixing of MS powder coating alum coating alum fixture such as3nos.butt hinges,150mmht,1no tower bolts 150mm long, 2nos alum long handles,125mm long 1no aldrop 200mm long, including fixing the door shutter to frame for finished item of work (Rate as per Quotation approved by the Executive Engineer).
8
-
28000
... More
Office Building;Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast.
25
-
19000
... More
Office Building;Supply and fixing Single shutter door with Medium teak wood frame of size 125x75mm and Flush door shutters 35mm thick FACTORY MADE MOULDED DOOR SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped with 15mm (5mmX3) thick X 30mm width on one stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different panel and / or prelamcolours on one side after routing the moulded design on flush door and 2mm prelam Pac sheet on other side using rubber adhesive on flush door and solvent cement adhesive on Pac lipping etc. complete, cost of fixtures like 6 Nos MS-Z Hold fasts-300 mm long of 40x40x5mm ISA, 3 Nos SS Butt hinges (IS:205)- 150 mm Long, 1 No SS Tower Bolt-10 mm (IS:204) 250 mm Long, 1 No. SS latch heavy 300 mm long, 1 No. SS Aldrop (IS:2681) 300 mm long, 2 Nos. SS fancy handles 150 mm long , 1 No. SS Door Stoppers, 1 Nos.Rubber/ Nylon door stop bushes, 1 no.s of 5mm clear glass panels in the vision panels portion including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractor profit etc., complete for finished item of work.
19
-
141208
... More
Office Building;Dadooing to walls with digital / polished glazed full body porcelain highlighter wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., including cost of overheads & contractors profitcomplete for finished item of work as directed by Engineer-in-charge.
40
-
31400
... More
Office Building;Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)
13.68
-
12216
... More
Office Building;Skirting with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering.
7.1
-
7434
... More
Office Building;Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)
159.7
-
168004
... More
Office Building;ii) Platforms
2.5
-
9505
... More
Office Building;Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) ,12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads of window sills on both edges , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work for Treads of Window Sills (S.S.701 & special)
3
-
17973
... More
Office Building;Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of Regular colours (other than black) in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand, water flooring stones etc. to site , cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work (APSS No.701 & 707)
1.4
-
6397
... More
Office Building;iv) Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same.
40
-
17600
... More
Office Building;iii) Grooves 2-3 mm
72
-
5544
... More
Office Building;ii) Risers
5.4
-
21827
... More
Office Building;Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work (S.S.701 & special) i) Treads
10.8
-
64703
... More
Office Building;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)
3.6
-
15293
... More
Office Building;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)
569.2
-
283462
... More
Office Building;Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)
5
-
2610
... More
Office Building;Reinforced Masonry for partition walls (100 mm thick) in CM (1:6) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit etc., but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509)
6.9
-
6148
... More
Office Building;Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contractors profit etc., complete for finished item of work. (APSS No. 501 & 504).
37.6
-
293806
... More
Office Building;Providing and Fixing of Edge Trim including all charges
57
-
20463
... More
Office Building;Providing and Fixing of TR60+ 1.00mm thk JSW Structural Metal Decking
184.6
-
243487
... More
Office Building;Extra for providing and applying of enamel paint of approved brand and manufacture on steel works for two or more coats to give the smooth and even shade including scafolding and staggings and tools etc., all complete as per the engineer in charge directions.
16.4
-
78884
... More
Office Building;Fabrication and erection in position structural steel work in built up sections, rolled steel sections, trusses and framed work including cutting, hoisting fixing in position and applying zinc chromate primer to exposed surfaces of steel etc., complete as per specification and as directed. (Grade 345 Mpa & 310 Mpa Hot rolled sections
16.4
-
2142660
... More
Office Building;Providing Mild steel (MS) steel bars ( (Fe 250 grade as per IS 432) of different diameters including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to bars, including all wastages such as overlaps, couplings, chairs, spacer bars, including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials and cost of overheads & contractors profit etc., complete for finished item of work in all floors.( APSS No.126)
0.1
-
8549
... More
Office Building;Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)
0.98
-
82612
... More
Office Building;i) 50 mm thickWindow Sills & Platforms
8.8
-
8378
... More
Office Building;Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
-
-
-
... More
Office Building;Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., for 60 cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting concrete, laying concrete, curing, cost of overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work for sunshades (APSS No. 402, 403 & 903) & 903)
13.2
-
14322
... More
Office Building;Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Lintels
0.8
-
10946
... More
Office Building;i) Deck Slab 150 mm thick at Trough & 90 mm at Ridge (Avg 120 mm Thk)
184.6
-
187554
... More
Office Building;Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
-
-
-
... More
Office Building;Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks for finished item of work. (APSS No. 402): HAND MIXING
2.7
-
15152
... More
Office Building;Supply and Fixing of Cement Bonded Board conforming to IS:14862-2000 - 6mm Thick including cost& conveyance, all labour charges, necessary screws etc completing for encasing Structural steel columns including cost, conveyance, all fixtures & all labour charges etc
79
-
43529
... More
Office Building;Supplying and fixing Aluminum composite cladding with skin material 0.50 mm thick aluminum sheet cover material natural polyethylene aluminum cladding panel fixed with extruded aluminum basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including cost & conveyance of all materials, all Taxes, all incidental, operational and Labour charges etc for finished item of work but excluding cost of structural steel fabrication, scaffolding charges, if any, ACP Cladding - 4 mm thick, overheads & contractors profit etc ., complete for finished item of work.
60
-
199140
... More
Office Building;Supply and Fixing of Rabbit wire mesh (chicken mesh) of not less than 30 gauge including cost & conveyance, all labour charges, screws, nails, bindung wire etc
104
-
2288
... More
Office Building;Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat, overheads and contractors profit, etc. complete for finished item of work as per Idia Gypsum Ltd specification.
141
-
147204
... More
Office Building;Supplying and fixing 14mm - Mineral Fibre Sheet Grid Line False Ceiling of Tegular Edge 600 x 600 of Board / Tegular/ Micro look Edge tiles with a Humidity Resistance of 90% RH, Average NRC 0.60, Light Reflectance >80%, Thermal Conductivity ? = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1; fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC universal holding clips system at 1200 mm c/c and fixing the 14mm Mineral Fibre Sheet of size 600 x 600 mm in position and finishing two coats of drywall topcoat including overheads & contractors profit, etc. complete for finished item of work.
47
-
55695
... More
Office Building;Supplying and fixing stainless steel works such as raling, hand rail, grills etc., using Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & Diameters for - 304 Grade as per the approved drawing including cost and conveyance of all materials to site, Labour charges for Fabrication of stainless steel works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish, overheads & contractors profit etc ., complete for finished item of work.
119
-
78302
... More
Office Building;Painting with 2 coats of approved synthetic enamel paint over a coat of primer of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for:-Synthetic enamel paint over a coat of primer to New Iron Work - 2 coats + 1 coat primer
32
-
5440
... More
Office Building;Painting to new wood work with luppam finish to give even & smooth surface and painting two coats with synthetic enamel paint 1st grade of approved brand and shade having VOC (Volatile organic compound) content less than 50 grams/liter over wood primer coat, including cost and conveyance of all materials to site, all labour charges , including sand paper on lappam coats for neat even and glossy surface, including cost of overheads & contractors profit, etc. complete for finished item of work as directed by Engineer-in-charge during exection - for all floors.
1.49
-
361
... More
Office Building;Providing and applying Exterior grade Texture ready mixed paint with sand texture added sand particles Acrylic copolymers and mineral compounds, bactericides and various additives or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation and applying 2 coats of weather proof exterior emulsion paint of approved brand and shade over a coat of primer including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - including cost of access scaffolding for:-External Colouring - Providing Texture and 2 coats weather proof exterior emulsion paint over a coat of primer to External walls
160
-
64480
... More
Office Building;Painting to new Internal walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. and cost of overheads & contractors profit complete for finished item of work as per SS 912 .
147
-
19257
... More
Office Building;Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation and applying 2 coats of plastic emulsion paint of approved brand and shade over a coat of primer including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for INTERNAL walls - including cost of access scaffolding for:-Internal Colouring - Providing Putty and 2 coats plastic emulsion paint over a coat of primer to Internal walls
334
-
132598
... More
Office Building;Supplying and fixing ornamental MS Grills including fabrication and erection in position using alround frame of 25mm X 5mm MS flat welded with 10mm square bars placed at 5" c/c Hor, 10" c/c ver fixed in both horizontal and vertical directions including cost and conveyance of all materials to work site and all operational, incidental labour charges, power charges, overheads & contractors profit etc., complete for finished item of work.
32
-
45632
... More
Office Building;Providing and fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated base steel as per IS 513 of ?D? quality, galvanized as per IS 277 and the glass holding section made of 304 grade stainless steel of 0.58 mm thick galvanized steel section as stiffeners inside the colour coated steel powder coated sections as per the design requirement & calculations to suit wind pressures as given in IS: 875, the primer coat with epoxy primer, finish painted with a polyester paint or powder coated with pure polyester powder and the vertical section of 50 mm x 99 mm x 0.72 mm, 33 mm x 56 mm x 0.72 mm for frame horizontal section, stiffener section of 47 mm x 97 mm x 1 mm, cover profiles sections of 20 mm x 58 mm x 0.58 mm, glass holding section of 37 mm x 37 mm & 37 mm x 18 mm including fixing 5mm thick Ocean Blue reflective glass, brackets made of CRCA powder coated/Electroplated to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement and EPDM gasket, U.V. resistant silicon sealant including fixing in concrete/masonry wall with self- expanding cap & screws inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and fixing charges excluding scaffolding complete for finished item of work.
11
-
92545
... More
Office Building;Supply & Fixing 12 mm thick Toughened Glass Frame less partition with C Channel in Floor & top wooden support in Falsec ceiling etc including all fixtures for rigid support etc.
15
-
38745
... More
Office Building;Providing wooden paneling 12 mm thick prelaminated particle board fixed on wooden frame of BT wood size 50.8 mm x 25.4 mm (2"x1") at distance of 609.6mm (2'-0") intervals of both ways providing 3/4" x 1/2" (19.05 mm x 12.7 mm) size BT wood ornamental cover beading and necessary screws, synthetic glue, including cost of overheads and contractor's profit complete for finished item of work.
15
-
30840
... More
Office Building;Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm.,including provision for Exhaust, cost and conveyance of all materials, accessories, labour charges for transportation, erection at site, including overheads and contractor profit etc.,complete for finished item of work.
1
-
6932
... More
Office Building;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter ? (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
17.28
-
133108
... More
Office Building;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co- extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. 1 ,
15.12
-
111540
... More
Office Building;S/F of 30mm thick WPC(wood plastic composite) solid door shutter factory made including made including fixing of MS powder coating alum coating alum fixture such as3nos.butt hinges,150mmht,1no tower bolts 150mm long, 2nos alum long handles,125mm long 1no aldrop 200mm long, including fixing the door shutter to frame for finished item of work (Rate as per Quotation approved by the Executive Engineer).
8
-
28000
... More
Office Building;Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast.
29
-
22040
... More
Office Building;Supply and fixing Single shutter door with Medium teak wood frame of size 125x75mm and Flush door shutters 35mm thick FACTORY MADE MOULDED DOOR SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped with 15mm (5mmX3) thick X 30mm width on one stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different panel and / or prelamcolours on one side after routing the moulded design on flush door and 2mm prelam Pac sheet on other side using rubber adhesive on flush door and solvent cement adhesive on Pac lipping etc. complete, cost of fixtures like 6 Nos MS-Z Hold fasts-300 mm long of 40x40x5mm ISA, 3 Nos SS Butt hinges (IS:205)- 150 mm Long, 1 No SS Tower Bolt-10 mm (IS:204) 250 mm Long, 1 No. SS latch heavy 300 mm long, 1 No. SS Aldrop (IS:2681) 300 mm long, 2 Nos. SS fancy handles 150 mm long , 1 No. SS Door Stoppers, 1 Nos.Rubber/ Nylon door stop bushes, 1 no.s of 5mm clear glass panels in the vision panels portion including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractor profit etc., complete for finished item of work.
12.18
-
90522
... More
Office Building;Supplying and fixing of Unplasticised Poly Vinyl Chloride(UPVC)2Track?2Panel Sliding Doors duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 45 mm x 2.20 mm with reinforcement of 1.2 mm thickness, super sash with overall size of 39 mm x 75 mm x 2.20 mm with for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. Door shall be provided with standard hardware & multi point locking system of bent handle espagulate .the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
2.52
-
16531
... More
Office Building;Providing & fixing glass door mounted over approved Glass Hinges . The shutters to be formed out of 12mm thick clear toughened glass. The glass shuttesr should be polished on the edges.Hardware : DORMA Hardware?s like, two no?s floor mounted SS bush of approved make, floor spring(BTS 84 ) etc per each shutter complete as per approved shop drawings and as directed.
8.64
-
65638
... More
Office Building;Granolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal and screened sand laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal sand and water, overheads & contractors profit, complete for finished item of work. (APSS No.701 & 710)
4
-
1576
... More
Office Building;Dadooing to walls with digital / polished glazed full body porcelain highlighter wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., including cost of overheads & contractors profitcomplete for finished item of work as directed by Engineer-in-charge.
37.17
-
28807
... More
Office Building;Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)
13.04
-
11084
... More
Office Building;Skirting with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering.
8
-
8040
... More
Office Building;Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)
161
-
162610
... More
Office Building;ii) Platforms
2
-
7442
... More
Office Building;Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) ,12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads of window sills on both edges , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work for Treads of Window Sills (S.S.701 & special)
3
-
17517
... More
Office Building;Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of Regular colours (other than black) in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand, water flooring stones etc. to site , cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work (APSS No.701 & 707)
2
-
8986
... More
Office Building;Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same.
49
-
21560
... More
Office Building;Cutting Grooves 2-3 mm in Granite slabs
97
-
7469
... More
Office Building;ii) Risers
7.29
-
29080
... More
Office Building;Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work (S.S.701 & special) i) Treads
15
-
87585
... More
Office Building;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)
6.3
-
26265
... More
Office Building;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) (internal)
494
-
223782
... More
Office Building;Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)
5
-
2365
... More
Office Building;Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509)
9.08
-
7455
... More
Office Building;Masonry work in CM(1:6) prop (Cement :50% Screened sand & 50% Rock sand) with fly ash cement solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contractors profit etc., complete for finished item of work. (APSS No. 501 & 504).
32
-
234144
... More
Office Building;Coursed rubble masonry with hard stone (2nd sort) in superstructure in cement mortar 1:6 ( 1 cement : 6 50% Screened sand & 50% Rock sand) including Bond stones at every 1.20m lengths including cost and conveyance of all materials like cement, fine aggregate (sand) cut stones, water etc., to site and including Seigniorage charges, all taxes on all materials including all operational, incidental and labour charges such as mixing mortar, constructing masonry, curing etc.,complete (APSS No. 615 & 601)
9.7
-
44067
... More
Office Building;Random Rubble stone masonry in CM (1:8) prop: (Cement: 50% Screened sand & 50% Rock sand) using hard Granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., to site, labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of overheads & contractors profit etc., complete for finished item of work in foundation and basement. (APSS No. 601 & 615).
9.7
-
37520
... More
Office Building;Providing and Fixing of Edge Trim including all charges
57
-
20463
... More
Office Building;Providing and Fixing of TR60+ 1.00mm thk JSW Structural Metal Decking Sheets including necessary studs, all lanour charges etc
185
-
244015
... More
Office Building;Extra for providing and applying of enamel paint of approved brand and manufacture on steel works for two or more coats to give the smooth and even shade including scafolding and staggings and tools etc., all complete as per the engineer in charge directions.
17.5
-
84175
... More
Office Building;Providing and laying of grouting for the gap between the base plates and pedestals using with grouting material of conbextra GP2 grout/Sysgrout 652 of venders specifications etc., including cost & conveyance of all materials, all incidental, operational and Labour charges etc for finished item of work. as per the directions of the engineer in charge
0.2
-
9878
... More
Office Building;Providing and fixing of base plates in any thickness etc., including cutting, fixing in position and applying of priming coat of approved steel primer all complete.
0.8
-
104520
... More
Office Building;Providing and fixing mild steel round holding down bolts EN 8.8 grade with nuts and washer plates complete
0.5
-
65325
... More
Office Building;Fabrication and erection in position structural steel work in built up sections, rolled steel sections, trusses and framed work including cutting, hoisting fixing in position and applying zinc chromate primer to exposed surfaces of steel etc., complete as per specification and as directed. (Grade 345 Mpa & 310 Mpa Hot rolled sections
17
-
2221050
... More
Office Building;Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)
6.34
-
525979
... More
Office Building;Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)i) 50 mm thickWindow Sills & Platforms
14
-
12698
... More
Office Building;Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., for 60 cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting concrete, laying concrete, curing, cost of overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work for sunshades (APSS No. 402, 403 & 903) & 903)
20
-
20640
... More
Office Building;Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Lintels
1.5
-
19430
... More
Office Building;i) Deck Slab 150 mm thick at Trough & 90 mm at Ridge (Avg 120 mm Thk)
200
-
196200
... More
Office Building;Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
-
-
-
... More
Office Building;Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) - For PLINTH BEAMS
9.16
-
115883
... More
Office Building;Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) - For PEDESTALS
8
-
85360
... More
Office Building;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Ready mix concrete from Batching Plant using 20mm size graded machine crushed hard Granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry, including superplastisizers @ 4% of weight of cement, placing with concrete Pump; including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as batching, laying concrete using concrete pump , curing etc., and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).FOR FOUNDATIONS.
40
-
402720
... More
Office Building;Plain Cement Concrete corresponding to M-15 grade as per IS 456 nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, all operational, incidental and labour charges such as mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work - For Leveling Course.
0.4
-
2063
... More
Office Building;Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks for finished item of work. (APSS No. 402): HAND MIXING
3
-
16221
... More
Office Building;Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, all charges for mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No. 402) MACHINE MIXING
23
-
88228
... More
Office Building;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING - For Leveling Course.
10
-
40420
... More
Office Building;Providing plinth protection withfly ash brick masonry in CM (1:6) on edge (115 mm width by 300 mm height),100 mm thick PCC(1:5:10) Prop. using 40 mm size HBG metal and on top 75 mm thick PCC M-20 (1:2:4) in panels of size not exceeding 1.5x1.5 mts and providing 5 mm thick glass strips between the panels and finishing the to surface to require smoothness and slopes including Grooves & thread lining as directed by the Engineer - incharge including cost conveyance of all materials to work site, labour charges, curing, excluding seigniorage charges sales and other taxes on all materials etc. complete for finished item of work
52
-
74412
... More
Office Building;Pre construction Anti termite Treatment in which chemical toxic to sub terrain termites is injected into soil during early stage of building Construction Treatment of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the columns , plinth beams (Back filling) walls and floor junction, external perimeters, along retaining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around columns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for spraying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge(Plinth area measurements will be taken for payment
213
-
36849
... More
Office Building;Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).
40
-
9240
... More
Office Building;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310)
184
-
8464
... More
Office Building;Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. a) up to 3.0 m depth
184
-
24104
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements