Professor Jayashankar Telangana State Agricultural University Tender

Laying BT road from gate complex to senior staff quarters junction including internal roads of Agric;Painting 2 coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surface as per Tech Specification 800 MORTH (5th revision) and as directed by the Engineer in charge.

Laying BT road from gate complex to senior staff quarters junction including internal roads of Agric;Supplying and application of hot applied thermoplastic road marking compound, 2.5mm thick including reflectorising glass beads @ 250 gms with reflectorising glass beads on Bituminopus surface at 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass bead as per IRC: 35, the material should be of BERGER company / BERGER Equivalent and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for cheking up the white index in the department lab. In case the department approves the white index of any vendor, the department engineer may carryout random checking of the applied products at site against the approved panel. in case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department) b) luminance factor of the material should be in the range of 80-85% at 45 degree centigrade as per AASTHOM 249 c) Crack resistance. The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262, Part-1, 1989 and should pass at the range of '0' degree centigrade to '-0' degree centigrade d) Adhesion : Strong E) Softening point : 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision : High as directed by the Engineer-In-Charge and confirming to IS : 164-1961 (1st revision reaffirmed in 1986) and clause confirming to IRC 35-1997 (For Lane Marking)

Laying BT road from gate complex to senior staff quarters junction including internal roads of Agric;Providing and laying bituminous concrete with 100-120 TPH hot mix plant using crushed aggregates of specified grading-II as per Table 500-18 of MORTH, premixed with bituminous binder 60/70 Grade and properties confirming to IS:73 @ 5.4 per cent by weight of total mix and filler i.e. Cement @ 2% by weight of aggregate including mixing in drum type hot mix loading of aggregate by FE loader and hot mixing of bitumen, filler with aggregate in drum / batch type HMP plant and transporting the hot mix to work site by tippers, laying with paver finisher to the required grade, level and alignment, rolling with smooth wheeled roller and vibratory rollers to achieve the desired compaction and density including all hire and operational charges of all T&P etc. complete as per MORTH specification clause No. 509 complete in all respects for finished item of work but excluding Tack Coat. including Wet bond-s" Nano-technology silicon based liquid Anti-stripping Additive (0.2 to 0.6Kg/MT of Bitumen)

Laying BT road from gate complex to senior staff quarters junction including internal roads of Agric;Providing and laying dense graded bituminous macadam with 100.120 TPH HMP producing an average output of 75 Ton per hour using crushed aggregates of specified grading-II as per Table 500-10 of MORTH premixed with bituminous binder 60/70 Grade as per IS 73 @ 4.5 per cent by weight of total mix and filler cement at 2% by weight of total aggregates including loading of material with FE loader, heating of binder, aggregates and filler in Drum/Batch type Hot Mix Plant, transporting the hot mix to work site by tippers, laying with a paver finisher to the required grade, level and alignment, rolling with smooth wheeled rollers and vibratory rollers to achieve the desired compaction and density including hire and operational charges of all T&P etc. complete for finished item of work as per MORTH specification clause No. 507 complete in all respects but excluding cost of Tack Coat

Laying BT road from gate complex to senior staff quarters junction including internal roads of Agric;Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.30 to 0.35 kg per sqm on the prepared dry and hungry Bitumen surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 MORD.

Laying BT road from gate complex to senior staff quarters junction including internal roads of Agric;Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry Bitumen surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 MORD.

Laying BT road from gate complex to senior staff quarters junction including internal roads of Agric;Cleaning and grubbing road land including uprooting bank vegetation, grass, bushes, shrubs, saplings and trees girth upto 30mm removal of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used of auctioned upto a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150mm in thickness.

Laying BT road from gate complex to senior staff quarters junction including internal roads of Agric;Milling the road surface in bituminous pavement using milling machine to make a uniform surface without disturbing the base cleaning the milled surface including diversion of traffic removing the material excluding transportation charges of material obtained from milling site, depositing the material to approved site of dumping loading, unloading including all leads and lifts etc., complete finished item of work as per the direction of engineer in charge of the work.

Laying BT road from gate complex to senior staff quarters junction including internal roads of Agric;Item Detailed Specification Description