Police Housing Corporation Limited Tender

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness,Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns.Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours ,But excluding GST.

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. aving isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outerframe having an overall size of 60 mm x 55 mm x 2.40 with inforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x2.40 mm with reinforcement of 1 mm thickness.(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm.,including cost and conveyance of all materials,accessories, labour charges for transportation,erection at site complete for finished item of work,But excluding GST.

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) openable doors with openable shutters duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 55 mm x 2.40 mm for outer frames, 74 mm x 60 mm x 2.40 mm for mullion sections as per the need and 102 mm x 60 mm x2.40 mm for openable shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gaskets for sash & Glazing bead shall be co-extruded with Grey colour soft PVC System shall be provided with 4 no?s of 3D Hinges for each shutter and multipoint locking with keys with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work,But excluding GST.

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);MOULDED PVC DOOR ? WOOD FREE Providing and fixing 30mm thick Brand factory made Moulded door shutter- wood free consisting of frame made out of MS. tubes 19gauge thickness and size of 25mmX25mm for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick High density EPS conforming to IS 4671-1984 bounded with 2mm thick termite proof,water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different plain and / or prelamcolours after routing to the moulded design on one side and 2mm plain and / or prelam Pac sheet on other side of the EPS.The edge of panel to be sealed with lipping of 10mm wide PVC sheet bottom (made by sticking 2 rigid foam sheet of 5mm thickness using Pac solvent cement) and stiles sides 25mm(5mmX5) thick and 30mm width Pac sheet fitted along Ms.Tube for lock provision for lock height 5mm thick Pac sheet of size 150mmX100mm fixed with upper and lower face of inner side of EPS Panel etc. Complete as per direction of Engineer ? in-Charge, manufacture specification and drawing.But excluding GST.

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);SUPPLY &FIXING SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT) Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2nos. of 150mm long brackets of 1515mm MS. Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of 19guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-incharge,But excluding GST.

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);TOILET DOOR: 0.8X2.1 SUPPLY AND FIXING OF 30 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH TEAK VENEER ON ONE FACE AND COMMERCIAL PLY ON ANOTHER FACE LAMINATED WITH 1MM THICK MAT FINISH LAMINATE ON BOTH FACES INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH MEDIUM TEAK WOOD SCANTLINGS OF SIZE 115 MM X 65 MM, INCLUDING 6 NOS. OF MS HOLD FASTS OF SIZE 250X50X8 MM, 3 NOS. OF 125 MM SS BUTT HINGES, 2 NOS. 125 MM LONG SS DOOR HANDLES, 1 NO SS ALDROP OF SIZE 250 MM LONG, 1NOS. OF 150 MM LONG SS TOWER BOLTS, PROVIDING KICK PLATE WITH 24 GUAGE ALUMINIUM SHEET UPTO 600MM HT ON REAR FACE WITH BOLTS, NUTS, NF SCREWS , INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. BUT EXCLUDING GST (ALL FITTINGS AND FIXTURES SHOULD BE OF STAINLESS STEEL, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);INTERNAL DOOR(SINGLE SHUTTER): 1.2X2.7 SUPPLY AND FIXING OF 35 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH TEAK VENEER ON ONE FACE AND COMMERCIAL PLY ON ANOTHER FACE LAMINATED WITH 1MM THICK MAT FINISH LAMINATE ON BOTH FACES INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH MEDIUM TEAK WOOD SCANTLINGS OF SIZE 125 MM X 75 MM, INCLUDING 6 NOS. OF MS HOLD FASTS OF SIZE 250X50X8 MM, 3 NOS. OF 125 MM SS BUTT HINGES, 1 NO. DOOR STOPER, 2 NOS. 150 MM LONG SS DOOR HANDLES, 1 NO SS ALDROP OF SIZE 250 MM LONG, 1NOS. OF 150 MM LONG SS TOWER BOLTS WITH BOLTS, NUTS, NF SCREWS ,5MM THICK PLAIN GLASS FOR VENTILATOR INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK.BUT EXCLUDING GST (ALL FITTINGS AND FIXTURES SHOULD BE OF STAINLESS STEEL, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);INTERNAL DOOR(DOUBLE SHUTTER): 1.5X2.7 SUPPLY AND FIXING OF 30 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH TEAK VENEER ON ONE FACE AND COMMERCIAL PLY ON ANOTHER FACE LAMINATED WITH 1MM THICK MAT FINISH LAMINATE ON BOTH FACES INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH MEDIUM TEAK WOOD SCANTLINGS OF SIZE 125 MM X 75 MM, INCLUDING 6 NOS. OF MS HOLD FASTS OF SIZE 250X50X8 MM, 6 NOS. OF 125 MM SS BUTT HINGES, 2 NO. DOOR STOPER, 4 NOS. 150 MM LONG SS DOOR HANDLES, 1 NOS SS ALDROP OF SIZE 250 MM LONG, 2NOS. OF 150 MM LONG SS TOWER BOLTS WITH BOLTS, NUTS, NF SCREWS,5MM THICK PLAIN GLASS FOR VENTILATOR INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. BUT EXCLUDING GST(ALL FITTINGS AND FIXTURES SHOULD BE OF STAINLESS STEEL, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);INTERNAL DOOR(DOUBLE SHUTTER): 1.2X2.7 SUPPLY AND FIXING OF 30MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH TEAK VENEER ON ONE FACE AND COMMERCIAL PLY ON ANOTHER FACE LAMINATED WITH 1MM THICK MAT FINISH LAMINATE ON BOTH FACES INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH MEDIUM TEAK WOOD SCANTLINGS OF SIZE 125 MM X 75 MM, INCLUDING 6 NOS. OF MS HOLD FASTS OF SIZE 250X50X8 MM, 6 NOS. OF 125 MM SS BUTT HINGES, 2 NO. DOOR STOPER, 4 NOS. 125 MM LONG DOOR SS HANDLES, 1 NOS SS ALDROP OF SIZE 250 MM LONG, 2NOS. OF 150 MM LONG SS TOWER BOLTS WITH BOLTS, NUTS, NF SCREWS ,5MM THICK PLAIN GLASS FOR VENTILATOR INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND FIXING SHUTTER ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK.BUT EXCLUDING GST (ALL FITTINGS AND FIXTURES SHOULD BE OF STAINLESS STEEL , ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Fixed Glazing duly manufactured using UPVC reinforced profiles of 60 mm x 56 mm x 2.25 mm for outer frames and the mullion sections are of 60 mm x 70 mm x 2.25 mm frames are structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm the sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with EPDM weathering seal resistant including cost and conveyance of all materials,accessories, labour charges for transportation,erection at site with templates for casement sizing complete for finished item of work,But excluding GST.

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);Supplying and fixing of Unplasticised PolyVinyl Chloride (UPVC) 3 track sliding windows with mesh shutter ? (2-glass shutters and 1- mesh shutter) duly manufactured using UPVC reinforcedprofiles(Composition of profileshall consists a minimum of 5.5 PHR of TiO2 and not more than 12PHR of CaCo3 forevery100parts of PVC resin) of(94mmx45mm)/(80mmx52 mm) x2.20 mm for outer frames, (58 mm x 39 mm)/(54mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced withhot dip galvanized up to 50 microns of minimum thicknessof1.0/1.2mmprefabricated & welded through fusion welding. The window sashshall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42mmx25mm)/(52mmx21.5mm)x2.0mm fitted with Vinyl Coated Fibremesh-onrollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners,silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item ofwork.But excluding GST.

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);PROVIDING SKIRTING TO INTERNAL WALLS SOLUBLE SALT PORCELAIN VITRIFIED TILES SCREEN PRINTED AND POLISHED OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO 3711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, LENGTH EQUAL TO FLOORING STONES, SET OVER BASE COAT OF CM (1:5) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE LIFTING (MANUAL) BUT EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS, ETC COMPLETE FOR FINISHED ITEM OF WORK. FOR GROUND FLOOR

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);FLOORING WITH SOLUBLE SALT PORCELAIN VITRIFIED TILES SCREEN PRINTED AND POLISHED OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO 3711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE,BUT EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS., COMPLETE FOR FINISHED ITEM OF WORK.GROUND FLOOR

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);ORNAMENTAL PLASTERING TO CEILING 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:3) PROP. with sponze finishing, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, LIFTING ( MANUAL) CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., BUT EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS, COMPLETE.FOR FINISHED ITEM OF WORK. FOR PORTICO (APSS NO: 901 & 904)

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, LIFTING ( MANUAL) CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., BUT EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS, COMPLETE .FOR FINISHED ITEM OF WORK. FIRST FLOOR (APSS NO: 901&904)

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, LIFTING ( MANUAL) CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., BUT EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS, COMPLETE .FOR FINISHED ITEM OF WORK. GROUND FLOOR (APSS NO: 901&904)

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SEINIORAGE CHARGES, SCAFFOLDING AND CURING ETC., BUT EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS, COMPLETE FOR SUPERSTRUCTURE WALLS 225 MM THICK FIRST FLOOR (APSS NO. 501&504).

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SEINIORAGE CHARGES, SCAFFOLDING AND CURING ETC., BUT EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS, COMPLETE FOR SUPERSTRUCTURE WALLS 225 MM THICK GROUND FLOOR (APSS NO. 501&504).

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);CEMENT CONCRETE (1:4:8) PROP. USING 40MM HARD GRANITE MACHINE CRUSHED METAL WITH MACHINE MIXING UP TO PLINTH LEVEL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC. BUT EXCLUDING SEIGNIORAGE CHARGES & GST, COMPLETE FOR FINISHED ITEM OF WORK. UNDER STONE SLAB FLOORING. (APSS NO: 402).

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M25 CORRESPONDING TO IS 456 USING WEIGH BATCHER / MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND - 0.40 CUM) COARSE AGGREGATE (0.80 CUM), WATER ETC., TO SITE AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC.,COMPLETE WITH MINIMUM CEMENT CONTENT OF 400 KGS PER CUM OF CONCRETE,I INCLUDING CENTERING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES,ETC.,FOR UNSUPPORTED HEIGHT 3.66M to 4.50M ,VIBRATING,CURING ETC, BUT EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS, COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK FOR FIRST FLOOR COLUMNS OF HEADROOM (APSS NO.403)

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M30 CORRESPONDING TO IS 456 USING WEIGH BATCHER / MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND - 0.40 CUM) COARSE AGGREGATE (0.80 CUM), WATER ETC., TO SITE AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC.,COMPLETE WITH MINIMUM CEMENT CONTENT OF 400 KGS PER CUM OF CONCRETE,I INCLUDING CENTERING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES,ETC.,FOR UNSUPPORTED HEIGHT 3.66M ,VIBRATING,CURING ETC, BUT EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS, COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK FOR FIRST FLOOR COLUMNS OF HEADROOM (APSS NO.403)

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M30 CORRESPONDING TO IS 456 USING WEIGH BATCHER / MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND - 0.40 CUM) COARSE AGGREGATE (0.80 CUM), WATER ETC., TO SITE AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC.,COMPLETE WITH MINIMUM CEMENT CONTENT OF 400 KGS PER CUM OF CONCRETE,I INCLUDING CENTERING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES,ETC.,FOR UNSUPPORTED HEIGHT 9.00M ,VIBRATING,CURING ETC, BUT EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS, COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK FOR GROUND FLOOR BEAMS FOR PORTICO(APSS NO.403)

CONSTRUCTION OF ADMINISTRATIVE BUILDING AT THE CTC OCTOPUS(BALANCE WORK);SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M30 CORRESPONDING TO IS 456 USING WEIGH BATCHER / MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND - 0.40 CUM) COARSE AGGREGATE (0.80 CUM), WATER ETC., TO SITE AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC.,COMPLETE WITH MINIMUM CEMENT CONTENT OF 400 KGS PER CUM OF CONCRETE,I INCLUDING CENTERING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES,ETC.,FOR UNSUPPORTED HEIGHT 9.00M ,VIBRATING,CURING ETC, BUT EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS, COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK FOR GROUND FLOOR SLABS OF 125MM THICK (APSS NO.403) FOR PORTICO