Police Housing Corporation Limited Tender

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply, fabrication and fixing of 1set MS bracket suitable for fixing out door unit of Cassette AC unit including all accessories etc., complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Installation of Inverter Cassette type Air Conditioners (Indoor and Outdoor units) including all accessories etc., complete as directed by the Engineer-in-charge but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Providing 2 runs of Copper tubes for suction and liquid between indoor and outdoor unit for Casseete Air -Conditioner including foaming etc., complete. 1. 3/4" x 3/8" 2. 5/8" x 1/4" 3. 1/2" x 1/4" or equivalent sizes.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Providing 2 runs of Copper tubes for suction and liquid between indoor and outdoor unit for Casseete Air -Conditioner including foaming etc., complete but excluding GST. 1 1/8" x 5/8"

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and Transportation of of INVERTER Model Cool type split AC unit with high wall mounted Single Split 100% copper indoor and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord (Voltage range 160- 264 volts) and cordless remote control with with warranty of compressor for 5 years iand comprehensive maintenance for 2 years. 1.5 TR 5 Star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32 / R-410 etc., complete as directed by the Engineer-in-charge but excluding GST. (For UPS & HUB Room @ GF FF SF, DCP L&O Ante Room @ FF, Addl. DCP Ante Room @ FF) Makes : Daikin / Bluestar / Hitachi / Mitsubishi Electric / Toshiba.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and Transportation of of INVERTER Model Cool type split AC unit with high wall mounted Single Split 100% copper indoor and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord (Voltage range 160- 264 volts) and cordless remote control with with warranty of compressor for 5 years iand comprehensive maintenance for 2 years. 2.0 / 1.8 TR 5 Star capable of delivering 21600 BTU/hr and above with operating on refrigerant R-32 / R-410 etc., complete as directed by the Engineer-in-charge but excluding GST. (For Ground Floor - CP Chamber Ante Room) Makes : Daikin / Bluestar / Hitachi / Mitsubishi Electric / Toshiba.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and Transportation of Inverter Cassette type AC unit with ceiling mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units etc complete with Wireless remote controller, but without refrigerent piping and cable.with 2 years warranty and annual maintenance contract. 4.0 TR Three Phase capable of delivering 48000 BTU/hr and above with operating on refrigerant R-32 / R-410 etc., complete as directed by the Engineer-in-charge but excluding GST. (For Video Conference Hall @ GF, DCP L&O @ FF, Addl.DCP @ FF, CCC Traffic & CCC L&O @ SF) Makes: Daikin / Bluestar / Hitachi / Mitsubishi Electric / Toshiba.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and Transportation of Inverter Cassette type AC unit with ceiling mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units etc complete with Wireless remote controller, but without refrigerent piping and cable.with 2 years warranty and annual maintenance contract. 2.5 TR capable of delivering 30000 BTU/hr and above with operating on refrigerant R-32 / R-410 etc., complete as directed by the Engineer-in-charge but excluding GST. (For Ground Floor - CP Chamber) Makes: Daikin / Bluestar / Hitachi / Mitsubishi Electric / Toshiba.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and fixing of 12 Way SPN DB with IP 43 Protection as per IS:13032 and suitable for single phase S.P out goings and for 1No Incommer including internal connection and labour charges for flush mounting etc., complete but excluding GST. Incommer: 10kA-40-63A FP MCB - 1No. Outgoing: 10kA-6-32A SP MCBs - 5 Nos. 10kA-40-63A TP MCB - 1 No. DB Makes: Legrand / Schneider / Siemens / LK. MCB Make: Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and transportation of 10W LED Bulk head fitting with milky diffuser heat sink integrated with housing with all accessories etc., complete with 5 years warranty warranty but excluding GST. LUMINAIRE MAKE : CROMPTON / HAVELLS / Jaquar LED MAKE: CREE / NICHIA / OSRAM.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and run of 5 of 6.0 Sqmm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable.in existing pipe for 2 runs of mains & 1 run of earth continuity inlcuding all labour charges etc., complete but excluding GST. Makes: Finolex / RR kabel / Havells / Polycab.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and run of 3 of 2.5 Sqmm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable.in existing pipe for 2 runs of mains & 1 run of earth continuity inlcuding all labour charges etc., complete but excluding GST. Makes: Finolex / RR kabel / Havells / Polycab.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and fixing of 10A 3/2 Pin 2 Module Modular Socket with shutter with 10A 1 Way 1 Module Modular Switch control on suitable Module Plastic Surface Box covered with suitable Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete but excluding GST. [Independent Switch Board] Modular Switch, Socket, Plastic Surface Box & Cover frame Make: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and fixing of 25mm outer dia heavy grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) surface with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete but excluding GST. Makes : Sudhakar / Modi / VIP.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply, transportation, installation, testing and commissioning of 16 passenger, G+3 1.0m/s passenger Gearless & Machine Room less elevator with following specifications with connected minor civil works required for installation of Lift including all accessories, scoffolding, requried channels, loading and unloading of materials etc., including comprehensive maintenance of lifts during the defect liability period but excluding GST. Makes: Schindler / Kone / OTIS / Mitsubishi or equivalent. Specifications: a) Type : Machine room less b) Pit Depth :1500 mm or as per NBC c) Minimum Floor to Floor Height (Required) : As per Standard d) Travel height : 3.6 to 4.0 mtrs e) Head room Height : 4.5mtrs f) Lintel Height (Required) : 2240mm from finished floor level +/- 10% g) Number of persons : 16 P h) Rated Load : 1088 Kgs i) Number of Stops : 6 stops j) Number of Access sides : 1 k) Floor Designations : G, 1, 2, 3, 4, 5. l) Drive Sytem : Alternating current, Voltage Frequency Drive (ACVF). m) Type of Controller : Fully collective control - Simplex / Duplex as per the site condition. n) Speed of Travel : 1.0 m/s o) Car size : As per Standard (1600mm wide x 1600mm deep x 2200mm height) p) Door width : 1000mm or As per Standard q) Door Height : 2000 mm or as per standard r) Rated output motor : as per standard s) Car Design : Car walls finish in Stainless stell hairline finish LED spot in ceiling. t) Car Doors : stainless steel hairline finish. Granite Flooring finish in Black sea. Deco ceiling finish in stainless steel Hairline. Full Height mirror on rear car panel. u) Car Operating Panel : Mechanical push button.Door open/close and alarm buttons / Touch panel or equivalent, Visual call confirmation, Car position Indicator, announcing arrows for collective controls, Segment display automatic landing doors with stainless steel hairline finish. Center Opening or Side Opening as per the site condition. w) Special Features : Vision Panel Closed loop control system Self Diagnostic control Overload detection Automatic evacuation to nearest floor (ARD) Light curtain on car entrance Alarm Horn Fire Switch Handrail in stainless steel finish on rear wall Auto Fan off Auto light off Intercom-3way etc.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and fixing of Automatic Street Light Control System with Optical Sensor, Low volatage / High voltage trip and reset, operating voltage 380 - 450 V AC, 50 HZ with suitable SMC enclousure of IP 54 protection, MCBs of Legrand / Schneider / L&T / Siemens of 10KA C/D curve and Contactor suitable to control the load of 8 KW Three phase load with necessary clamping arrangements etc., complete but excluding GST. Makes : Swadeep Nature Switch / Light Mate / L&T / Siemens / Bajaj.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Labour charges for run of UG cable on wall/ existing pipe with necessary fixing arrangements such as saddles, clamps, wooden separators etc., (as directed by departmental official) etc., complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Earth work excavation of Trench in hard ground soil, laying of U.G cables up to 50 Sqmm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply of 10 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) but excluding GST. Makes : Universal / Polycab / Gloster.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) but excluding GST. Makes: Universal / Polycab / Gloster.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and fixing of 1.5 Sqmm 3 core PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:2010 including all transportation charges etc., complete but excluding GST. Makes : Finolex / RR kabel / Polycab / Gloster.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and transportation of 90W +/-10% (>=9000 Lumens) LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, Thermal shock and impact resistant IK07 fixed to the housing by SS screws Suitable lense on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >120 lumens / watt, with Ingress protection IP66, BIS approved Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc., complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates but excluding GST. LUMINAIRE MAKE : CROMPTON / Wipro / Jaquar. LED MAKE : CREE / NICHIA / OSRAM.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and fixing of 1 No 10A 10 kA, C/D Curve ISI Mark SP MCB in existing M.S. box with Din channel, 4way 63A connector including cost & conveyance of all materials and labour charges etc., complete but excluding GST. Make: Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Foundation and erection charges with specialT&P, for 7.50 Mtrs long Octagonal / Conical pole duly erecting on base plate duly provided 4 Nos foundation bolts with nuts with providing of 0.45Mtrx0.45Mtrsx1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement as directed by the field engineers during execution including centering, decentering, water curing as required, soil exacavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance of materials etc., complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Fabrication, Transportation and Supply of 1.5 Mtr sword type or any decorative Double arm bracket with dooms complete with all accessories with MS galvanized 50mm dia Pipe but excluding GST. Makes: BAJAJ / VALMONT / TRANSRAIL / UTKARSH.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Fabrication, Transportation and Supply of 1.5 Mtr sword type or any decorative Single arm bracket with dooms complete with all accessories with MS galvanized 50mm dia Pipe but excluding GST. Makes: BAJAJ / VALMONT / TRANSRAIL / UTKARSH.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Fabrication, Transportation and supply of hotdip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including chain for anti theft mechanism, supply of suitable boards with bakelite sheet, din channel for MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.50 Mtrs height Pole having dimensions Bottom 130mm, Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700mm long 'J' bolts along with template or equivalent but excluding GST. Makes: BAJAJ / VALMONT / TRANSRAIL / UTKARSH.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply of 2.5 Sqmm 8 Core PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc., complete but excluding GST. Makes : Finolex / RR kabel / Polycab / Gloster.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply of 150 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) but excluding GST. Makes : Universal / Polycab / Gloster.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply, Transportation, erection and commissioning (Excluding Foundation) of 3 Phase, 415, 50Hz, water cooled multi cylinder diesel generator set with alternator of 125KVA / 100KW output continuous rating directly coupled Engine, Alternator and radiator with guard and mounted on a common base frame of Robust construction and complete with AMF control panel having IP-52 protection, anti vibration mounts of reputed make, Acoustic Enclosure as per CPCB norms IV, sound absorbing material to restrict sound level up to 75 dB up to 1 mtr distance and etc as per the following specifications mentioned but excluding GST. 125 KVA, 3 Phase, 415, 50 Hz, 154 BHP, water cooled multy cylinder diesel generator set with alternator of 125 KVA output continious rating at 0.8 p.f. Batteries. A. Alternator : Kirloskar / Stamford / Crompton Greaves make. The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21. B.Diesel Engine : Kirloskar / Cummins / Mahindra & Mahindra / Greaves Cotton Diesel Engine start, developing suitable 154 BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 125 KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc. 01. Exhaust pipe of required size as per the standards. 02. Diesel tank suitable for 8 to 12 Hours running capacity. 03. Residential Silencer. 04. SMF Batteries with leads as per the Manufacturer standards. C. AMF Control Panel:- AMF control panel shall be fabricated with 16SWG CRCA sheet shall be totally enclosed with dust and Vermin proof, floor mounted / wall mounted type and shall be comprising the following. 01. Voltmeter with selector switch. 02. 4 Pole MCCB incomer of 630A 4 Pole MCCB, 50KA rating of Schenieder / LK make for EB and DG. 03. Ammeter with selector switch with CTs. 04. PF Meter and frequency Meter. 05. Indicator lamps (set Run, Load ON) with fuses. 06. KWH Meter of required rating. 07. Set of control fuses and current transformer. 08. Input Terminal board and output Terminal Board. 09. Battery charger with transformer rectifier unit. 10. Alternator supply air break contactor of LK make. 11. Main supply air break contactor of LK make. 12. Audio Visual announciation. 13. control relays and timers with one mode selector switch, set of push buttons. 14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supplying of Pair of rubber hand gloves suitable for working on 11KV but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Providing of Shock instrution chart in English / Hindi / Telugu duly framed with front glass but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Providing of Danger Notice Plates of size 250x200mm, shall comply with IS:2551-1982 but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply of First Aid Box 18'' X 12'' X 8'' but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and fixing of Co2 4.5 Kg capacity type extinguisher with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure, discharge hose, wall mounting bracket / stand etc., complete, confirming to IS:15683 for electrical room but excluding GST. Makes: MINIMAX / CEASEFIRE.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Providing floor mounting stand for keeping 4No of fire bucket 1500mm length, 900mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of enamel paint. but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply of round bottom G.I sheet bucket of 9 Ltrs. Capacity as per IS:2546 made out of 24 gauge GI sheet with extra handle at bottom duly painted inside and red out side with printed with FIRE Mark for stand and hook and filled with sand and arranged to existing stand or hook but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and Run of 40mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and Run of 32mm x 6mm copper strip including cost of all accessories and labour charges etc., complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr length with funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc., complete as per IS specification 732/1982 (Part II) but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Providing CTPT plinth 600mm x 600mm x 2.1 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft and at the top and pedastal of above size with brick masonry duly plastered with 20mm thick including watering etc., complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Providing transformer plinth 1.2 x 1.2 x 1.5 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top and 225mm thick wall constructed in stone masonry and remaking hallow portion shall be filled with stone chips duly plastered 20mm thick outsides including watering etc., complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Providing and spreading stone metal 40mm size for 100 mm depth above the ground level but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Refilling with carted gravel in transformer yard with an initial leed in layers not exceeding 150mm thick consolidating each deposited layer by water completeing levelling surface dressing including incidental operational labour charges etc.,complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and erecting double leaf hinged door each 150cms width x 185cms height using 40 mm dia B grade ISI marked G.I pipe from all four sides with necessary bends with cross supports of angle iron 40 x 40 x 6mm with the door leaf covered with chain link mesh of No. 8 SWG G.I wire with necessary flat iron covering all around frame. The door shall have heavy latches, and side channels of 100x50x5mm locking arrangement with lock of medium size with duplicate keys, the fencing completely erected with anti corrosive red oxide paint and two coats of prescribed enamel paint / silver paint. The channel iron of size 100x50mm x 2.5Mtr. length shall be provided and erected at both sides of gate with C.C work but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and erecting 50x50x6mm angle iron as corner support to be fixed away from the fence support fixed at the middle of the fencing frame and the other side in CC foundation of 15x15x40 cms complete duly painted with one coat of red oxide and two coats of aluminium paint but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and erecting fencing of section having size 2450 mm in height from ground level and 1200mm width by using angle iron size 50x50x6mm erected in CC foundation 15x15x40cms deep. The section of the frame shall be fitted with flat iron supports of size 25x6mm on top, bottom and middle and chain link jali of 8 SWG G.I to the angle iron at every distance of 30 cms by iron studs complete duly painted with one coat of red oxide and two coats of aluminium paint but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Plastering to superstructure 20mm thick in cm with a base coat of 16mm thick in cm (1:6) prop. And top coat of 4mm thick in cm (1:4) prop. With double sponge finishing complete including making grooves cost and conveyance of all materials to site, labour charges, scaffolding, curing, lift charges and all other incidental and operational charges etc., complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Poviding Maonary work in CM(1:4) Prop. With Flyash cement solid blocks of size 290X100X140mm for manufacturing of flyash solid blocks using flyash of 80Kgs cement of 15 Kgs gypsum of 5 kgs and stone dust including cost and conveyance of all materials labour charges seiniorage charges scaffolding and curing etc., complete. with a compressive strength not less than 50 kg/sqm for walls for superstructure walls. 100mm thick Ground floor but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Randum Rubble stone masonry with granite stone in CM(1:6) Prop. Including cost and conveyance of all materials to site , seignorage, labour charges, curing etc., complete for foundations for finished item of work (APSS No.601 & 603) but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;CC (1:5:10) prop. Using 40mm gauge hard granite metal from approved quarry including cost and conveyance of all materials to site and labour charges for laying, ramming curing etc., complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Earth work excavation for foundations and depositing on bank with an initial lead of 10m and lift of 2m in hard gravelly and other hard soils except rock requiring blasting and all other kinds of soils such as hard stiff clay, stiff black cotton hard red earth, murram ordinary gravel including shoring, strutting dewatering etc., complete for finished item of work for foundations (APSS no.308) but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and laying of 300mm dia (NP2) (PH Rate) RCC Hume pipe with Collars for Road crossings etc., complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Labour charges for run of U.G. cables on wall / stoneware / Hume pipe with necessary fixing arrangements such as saddles, clamps, wooden seperators etc., (As directed by departmental official) complete for the cables but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Earth work excavation of Trench in hard ground soil, laying of U.G cables from 70 Sqmm to 400 sqmm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket suitable for 70 Sqmm 3.5 Core XLPE insulated armoured cable and heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 70 Sqmm 3.5 Core XLPE insulated armoured cable etc complete with nuts, bolts and washers etc., complete but excluding GST. Glands Makes: SMI / Commet / Dowels. Lugs Makes: DMI / Jainson / Dowels.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply of 70 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) but excluding GST. Makes : Universal / Polycab / Gloster.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket suitable for 95 Sqmm 3.5 Core XLPE insulated armoured cable and heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 95 Sqmm 3.5 Core XLPE insulated armoured cable etc complete with nuts, bolts and washers etc., complete but excluding GST. Glands Makes: SMI / Commet / Dowels. Lugs Makes: DMI / Jainson / Dowels.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply of 95 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) but excluding GST. Makes : Universal / Polycab / Gloster.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket suitable for 185 Sqmm 3.5 Core XLPE insulated armoured cable and heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 185 Sqmm 3.5 Core XLPE insulated armoured cable etc complete with nuts, bolts and washers etc., complete but excluding GST. Glands Makes: SMI / Commet / Dowels. Lugs Makes: DMI / Jainson / Dowels.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply of 185 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) but excluding GST. Makes : Universal / Polycab / Gloster.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Providing and errecting heat shrinkable outdoor termination kit for 11 KV HT XLPE insulated armoured cable 150 Sqmm 3 core with necessary materials etc., complete but excluding GST. Makes : Raychem / Transeal / M Seal.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Providing and errecting heat shrinkable indoor termination kit for 11 KV HT XLPE insulated armoured cable 150 Sqmm 3 core with necessary materials etc., complete but excluding GST. Makes : Raychem / Transeal / M Seal

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply of 150 Sqmm 3 Core HT XLPE (E) insulated 11000 V grade armoured Cable, as per IS specification confirming to IS 7098/II/85 with latest amendments etc., complete but excluding GST. Makes : Universal / Polycab / Gloster.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Street Lighting Panel board: Fabrication, Transportation, Supply, Installation, Testing and Commissioning of suitable size, Indoor type panel of 14 guage CRCA sheet Make : TATA / JINDAL for termination of suitable alluminium cables with the following incorporated in the panel for Distributing the power supply but excluding GST. (The Contractor shall submit shop drawings before fabrication of Panel for approval of Tendering Authority. The Contractor shall arrange pre-inspection at workshop before despatch) Main incoming: Supply and fixing of 250A 4 Pole MCCB, 35/36kA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36kA with thermal magnetic release Panel Mounted. Makes : LK (L&T) - D sine / Schneider-NS NSX / Legrand -DP X3 / Siemens-3V. Aluminium Bus bar Size: 40mm X 12mm x 1 Run suitable length - 4 Nos for Mains & links (RYBN) to 250A FP MCCB. Required Accessories: Supply and erection of 0-500V Digital Volt meter on exisiting panel board including connections etc., complete. MAKES : CONZERVE / ELMEASURE / LK (L&T) / SEIMENS. Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital Ammeter of size 96x96mm on existing panel board including connections etc., complete. MAKES : CONZERVE / ELMEASURE / LK (L&T) / SEIMENS. Supply and fixing of 6-32A SP MCB 10 kA, C/D Curve ISI Mark - 5 Nos. Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora. Supply and erection of Selector switch for Voltmeter / Ammeter on the existing panel including connections etc., complete - 3 Nos. Makes : LK (L&T) / SALZAR / Siemens. Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing panel including connections etc., complete - 3 Nos. MAKE : KAPPA. Heat shrinkable sleeves for the Bus bars (RYBN) of required length. Supply and erection of LED indication lamps on the existing panel board - 5 Nos. Makes : LK (L&T) / SALZAR / Siemens. Supply and fixing of SMC type supports for the bus bars 60 x 70 x 14mm - 20 Nos. GI Strip for extended earth terminals 40mm x 6mm of required length, Base channel 75mm x 40mm of required length. 100A FP Power Contactor-AC1 - 1 No, Make: L&T / Siemens / Legrand / ABB. Street Light Timer - 1 No. Make: L&T / Siemens / Legrand / ABB. Outgoings: 1) Supply and fixing of 63A 4 Pole MCCB, 16kA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 16kA with thermal magnetic release Panel Mounted. Makes : LK (L&T) - D sine / Schneider-NS NSX / Legrand -DP X3 / Siemens-3V. 2) Supply and fixing of 63A FP MCB 10 kA, C/D Curve ISI Mark. Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora. 3) Supply and fixing of 125A 4 Pole MCCB, 25kA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25kA with thermal magnetic release Panel Mounted. Makes : LK (L&T) - D sine / Schneider-NS NSX / Legrand -DP X3 / Siemens-3V. The Panel Size approx: 1.40 RM (W) X 1.625 (H) X 0.45 RM (D) The connections of 250A FP MCCBs should be done with above mentioned Bus bar strips with bottom/Top entry cables. 125A, 63A FP MCCBs & 63A FP MCBs should be done with 10.0 Sqmm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable. Makes : Finolex / RR kabel / Havells / Polycab. The control wiring for metering shall be done with 1.5 Sqmm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable. Makes : Finolex / RR kabel / Havells / Polycab. The above Panel shall be cleaned with 7 tank process and painting with one coat of red oxide and two coats of powder coated light grey as per IS 631 of (5) etc complete and provided suitable base channel of 75X40X6mm size on existing trench / brick masonary pedastals CM(1:4) etc., complete as directed by the Engineer- in - Charge.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Floor Distribution Panel Board: Fabrication, Transportation, Supply, Installation, Testing and Commissioning of suitable size, Indoor type panel of 14 guage CRCA Make : TATA / JINDAL sheet for termination of 4R x 3.5 core x suitable XLPE Aluminium cables with the following incorporated in the panel for Distributing the power supply but excluding GST. (The Contractor shall submit shop drawings before fabrication of Panel for approval of Tendering Authority. The Contractor shall arrange pre-inspection at workshop before despatch) Main incoming: Supply and fixing of 250A 4 Pole MCCB, 35/36KA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36KA with thermal magnetic release Panel Mounted. Makes : L&T- D shine / Legrand -DP X3/ Siemens-3VL. Aluminium Bus bar Size: 40mm X 12mm x 1 Run suitable length - 4 Nos for Mains (RYBN) 25mm X 6mm x 1 Run suitable length - 4 Nos for links (RYBN) to 63A MCCB. Required Accessories: Supply and erection of 0-500V Volt Digital meter on exisiting panel board including connections etc., complete - 1 No. MAKES : CONZERVE / L&T / SEIMENS. Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital Ammeter of size 96x96mm on existing panel board including connections etc., complete - 1 No. MAKES : CONZERVE / L&T / SEIMENS. Supply and fixing of 6-32A SP MCB 10KA, C/D Curve ISI Mark -3 Nos. Makes : Legrand-DX3 / Schneider-Acti9 / L&T. Supply and erection of Push buttons on the existing panel board - 3 Nos. Makes : L&T / SALZAR. Supply and erection of Selector switch for Voltmeter / Ammeter on the existing panel including connections etc., complete - 2 Nos. Makes : L&T / SALZAR. Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing panel including connections etc., complete - 3 Nos. MAKE : KAPPA. Heat shrinkable sleeves for the Bus bars (RYBN) of required length. Supply and erection of LED indication lamps on the existing panel board - 3 Nos. Makes : L&T / SALZAR. Supply and fixing of SMC type supports for the bus bars 60 x 70 x 14mm - 8 Nos. GI Strip for extended earth terminals 40mm x 6mm of required length, Base channel 75mm x 40mm of required length. Outgoings: Supply and fixing of 63A 4 Pole MCCB, 16KA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 16KA with thermal magnetic release Panel Mounted - 10 Nos. Makes: L&T- D shine / Legrand -DP X3/ Siemens-3VL. The Panel Size approx: 1.0 RM (W) X 1.25 RM (H) X 0.4 RM (D) The connections of 63A MCCB should be done with above mentioned Bus bar strips with bottom / Top entry cables. The control wiring for metering shall be done with 1.5sqmm copper FRLS flexible cable of Polycab / Finolex / RR Kabel: Make. The above Panel shall be cleaned with 7 tank process and painting with one coat of red oxide and two coats of powder coated light grey as per IS 631 of (5) etc complete and provided suitable base channel of 75X40X6mm size on existing trench / brick masonary pedastals CM(1:4) etc., complete as directed by the Engineer- in - Charge.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Main Distribution Panel Board @ Ground Floor: Fabrication, Transportation, Supply, Installation, Testing and Commissioning of suitable size, Indoor type panel of 14 guage CRCA Make : TATA / JINDAL sheet for termination of 4R x 3.5 core x suitable XLPE Aluminium cables with the following incorporated in the panel for Distributing the power supply but excluding GST. (The Contractor shall submit shop drawings before fabrication of Panel for approval of Tendering Authority. The Contractor shall arrange pre-inspection at workshop before despatch) Main incoming: 1) Supply and fixing of 630A, 4 Pole, Automatic operated transfer switch (ATyS) Conforms to IEC 60947-6-1, IEC 60947-3 - 1 No. Makes : SOCOMEC / L&T/ Elmeasure. Model : ATyS A - 95154063SL. 2) Supply and fixing of 630A 4 Pole, 50kA, electrically drawout Air Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection. LK (L&T) U Power / Schneider Master Pact / Legrand DMX3 / ABB Emax. Aluminium Bus bar Size: 120mm X 12mm x 1Run suitable length - 4 Nos for mains for RYBN, 120mm X 12mm x 1 Run suitable length - 4 Nos for links (RYBN) to 630A ACB, 40mm X 12mm x 1 Run suitable length - 4 Nos for links (RYBN) to 250A MCCB. 40mm X 6mm x 1 Run suitable length - 4 Nos for links (RYBN) to 125A MCCB. Required Accessories: Supply and erection of 0-500V Digital Volt meter on exisiting panel board including connections etc., complete. MAKES : CONZERVE / ELMEASURE / LK (L&T) / SEIMENS. Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital Ammeter of size 96x96mm on existing panel board including connections etc., complete. MAKES : CONZERVE / ELMEASURE / LK (L&T) / SEIMENS. Supply and erection of L.T. 3phase Digital multifunction energy meter Class I with LED display for measuring all the parameters (Voltage, Current, Frequency, Power factor, KW, KVA, KWH, KVA, KVAH, KVAR and THD Events) on existing box panel board including connections etc., complete. MAKES : CONZERVE / ELMEASURE / LK (L&T) / SEIMENS. Supply and fixing of 6-32A SP MCB 10KA, C/D Curve ISI Mark -3 Nos. Makes : Legrand-DX3 / Schneider-Acti9 / L&T. Supply and erection of Push buttons on the existing panel board - 3 Nos. Makes : LK (L&T) / SALZAR / Siemens. Supply and erection of Selector switch for Voltmeter / Ammeter on the existing panel including connections etc., complete - 2 Nos. Makes : LK (L&T) / SALZAR / Siemens. Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing panel including connections etc., complete - 3 Nos. MAKE : KAPPA. Heat shrinkable sleeves for the Bus bars (RYBN) of required length. Supply and erection of LED indication lamps on the existing panel board. Makes : LK (L&T) / SALZAR / Siemens. Supply and fixing of SMC type supports for the bus bars 60 x 70 x 14mm - 16 Nos. GI Strip for extended earth terminals 40mm x 6mm of required length, Base channel 75mm x 40mm of required length etc. Outgoings: 1) Supply of 250A 4 Pole MCCB, 35/36kA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36kA with thermal magnetic release Panel Mounted - 8 Nos. Makes : LK (L&T) - D sine / Schneider-NS NSX / Legrand -DP X3 / Siemens-3V. 2) Supply of 125A 4 Pole MCCB, 25kA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25kA with thermal magnetic release Panel Mounted - 6 Nos. Makes : LK (L&T) - D sine / Schneider-NS NSX / Legrand -DP X3 / Siemens-3V. The Panel Size approx: 2.20 RM (W) X 1.8 RM (H) X 0.80 RM (D) The connections of 630A Auto Transfer Switch (ATyS) and 630A ACB, 250A MCCB and 125A MCCB should be done with above mentioned Bus bar strips with bottom / Top entry cables. The control wiring for metering shall be done with 1.5 Sqmm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable. Makes : Finolex / RR kabel / Havells / Polycab. The above Panel shall be cleaned with 7 tank process and painting with one coat of red oxide and two coats of powder coated light grey as per IS 631 of (5) etc complete and provided suitable base channel of 75X40X6mm size on existing trench / brick masonary pedastals CM(1:4) etc., complete as directed by the Engineer- in - Charge.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;LT Kiosk 630A ACB for 315 KVA Distribution Transformer: Fabrication, Transportation, Supply, Installation, Testing and Commissioning of suitable size, plinth mounting outdoor type LT Distribution panel of 14 guage CRCA sheet Make : TATA / JINDAL for doors & internal partitions and termination of (4R provision) 3.5 core suitable XLPE aluminium cables with the following incorporated in the panel for Distributing the power supply but excluding GST. (The Contractor shall submit shop drawings before fabrication of Panel for approval of Tendering Authority. The Contractor shall arrange pre-inspection at workshop before despatch) Main incoming: Supply and fixing of 630A 4 Pole, 50kA, electrically drawout Air Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection. LK (L&T) U Power / Schneider Master Pact / Legrand DMX3 / ABB Emax. Aluminium Bus bar 120mm x 12mm x 1 Run x Suitable length - 4 Nos for Mains (RYBN) Required Accessories: Supply and erection of 0-500V Digital Volt meter on exisiting panel board including connections etc., complete. MAKES : CONZERVE / ELMEASURE / LK (L&T) / SEIMENS. Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital Ammeter of size 96x96mm on existing panel board including connections etc., complete. MAKES : CONZERVE / ELMEASURE / LK (L&T) / SEIMENS. Supply and fixing of 6-32A SP MCB 10 kA, C/D Curve ISI Mark. Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora. Supply and erection of Push buttons on the existing panel board - 3 Nos. Makes : LK (L&T) / SALZAR / Siemens. Supply and erection of Selector switch for Voltmeter / Ammeter on the existing panel including connections etc., complete - 2 Nos. Makes : LK (L&T) / SALZAR / Siemens. Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing panel including connections etc., complete - 3 Nos. MAKE : KAPPA. Heat shrinkable sleeves for the Bus bars (RYBN) of required length. Supply and erection of LED indication lamps on the existing panel board - 3 Nos. Makes : LK (L&T) / SALZAR / Siemens. Supply and fixing of SMC type supports for the bus bars 60 x 70 x 14mm - 8 Nos. GI Strip for extended earth terminals 40mm x 6mm of required length, Base channel 75mm x 40mm of required length etc. The Panel Size approx: 0.8 RM (W) x 1.20RM (H) x 0.8 RM (D) The connections of 630A ACB shall be done with Bus bar strips with bottom entry cables. The control wiring for metering shall be done with 1.5 Sqmm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable. Makes : Finolex / RR kabel / Havells / Polycab. The above Panel shall be cleaned with 7 tank process and painting with one coat of red oxide and two coats of powder coated light grey as per IS 631 of (5) etc complete and provided suitable base channel of 75x40x6mm size on suitable brick pedastal CM(1:4) of size 0.2 RM (W) x 1.10 RM (L) x 1.0 RM (H) (0.6mtr AGL + 0.4mtr BGL) etc., complete as directed by the Engineer- in - Charge but excluding GST.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply, Fabrication, Transportation and erection of DP structure made with 2 Nos 175mm x 85mm ( ISMB Modified ) or equivalent about 30'-0 length / 9.1 mtrs length RS joist pole erection of the same Including excavation of pit in all kinds of soil including breaking stones, concreting with (1:3:6) mixture base plate, coil earthing back filling, 1:2:4 for couping including red oxide primary painting and two coats of aluminium painting etc., complete as required with following as per CEIG norms but excluding GST. Make : TATA / JINDAL. a) 400A AB Switch-1No b) HG Fuse sets-1No c) LAS-1set. d) Required Number of 11KV pin and disc insulatiors. e) Required length of 100X50mm and 75X40mm ISMC chanell iron including two coats of redoxide and two coats of enamil paint ect for finished item of work. f) 11KV pin insulators and disc insulators. g) AB switch operating pipe with handle and lock and key arrangements. h) "0" SWG or 8.25 mm dia hard drawn bare copper wire including copper binding wire etc., complete as required including connections. i) 40X6mm GI strip for the DP structure earthing. j) 25X6mm copper strip for lightning arrestors earthing. k) 600X600mmX3,15mm thick copper plate earthings as per NEC with brick massonary chambers - 2 Nos. l) GI pipe earthing for the Double pole structure with brick massonry chambers as per IS - 2 Nos.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply, Transportation, Installation and Commissioning of 11 KV, 630A, 25 KA Outdoor type Load Break Switch as detailed below with suitable CC foundation and 2 Nos GI pipe earthing with brick massonry chambers etc., complete but excluding GST for finished item of work. a) Load break switch: 11KV,630A, 25 KA with fuse trip, earth switch, manually operated spring chargesd mechanis with 2 no + 2 NC. b) HT HRC fuse upto 63A - 3 nos. c) Bus bar connection. d) Indication lamps. e) Manual trip Push buttion. Make : Megawin / Pentagon.

Providing External Electrification with DTR, DG Set, few ACs and 16 Passenger Lift to CP, Warangal;Supply, Transportation, Installation, Testing and Commissioning of 315 KVA Copper Wound Transformer with all test reports. The Transformer shall be designed and manufactured as per IS : 1180 OCTC with level - I with initial filling of oil as per IS 335-1993 but excluding GST. The basic details of the Transformer are as under. Makes: Kirloskar / PETE / Esennar / Voltamp / Crompton. 1. Quantity : 1 2. Rated KVA : 315 KVA 3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed 7. Cooling : ONAN 8. Temp Rise : 40°C in oil, 45°C by resistance 9. Vector Group: Dyn 11 10. Primary Connection : Delta 11. Nominal Voltage / Current : ______ 12. Highest system Voltage: 12000V 13. Primary Frequency :50 HZ +/- 3% 14. Number of Phases : 3 15. Primary wires: 3 16. Secondary connection : Star 17. Secondary Volts / Current : 433V 18. Secondary phases : 3 19. Secondary wires: 4 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps) 21. Terminal arrangement. a.HV: HT terminal box as per the site condition. b. LV: Cable box suitable to receive XLPE cable. 22. LV:One separate terminal for earthing. 23. Total Losses at 50% Loading [Watts] [Max] --- as per IS 24. Total Losses at 100% Loading [Watts] [Max]--- as per IS 25.Percentage Impedance at 75 deg. C at ----- as per IS 26. No Load current: Less than 2% of full load current. 27. Standrad Fittings & Accessories: a. Rating and terminal marking plate: One b. Lifting Lugs : Two c. Off-circuit tap switch : One d. Earthing Terminals : Two e. Radiators ( Attachable) : Adequate f. Explosion vent with Diaphragm : One g. Conservator with Drain plug:one h. Oil filling hole with cap : One i. Oil level indicator : One j. Dehydrating Silicagel Breather : One k. Terminal Arrangement: HV With Treminal Box l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Filter valve with blanking plate : One o. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : One r. Four: Unidirectional flat rollers s. One: 10Cm dial thermometer (Rigid stem type)