Police Housing Corporation Limited Tender

Providing External Electrification to the DPO, Suryapet.;Supply of 10 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) but excluding GST. Makes: Torrent / Universal / Polycab / Havells.

Providing External Electrification to the DPO, Suryapet.;Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) but excluding GST. Makes: Torrent / Universal / Polycab / Havells.

Providing External Electrification to the DPO, Suryapet.;Supply and fixing of 1.5 Sqmm (22/0.3mm) 3 Core PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990 including all transportation charges etc complete but excluding GST. Makes : RR kabel / Havells / Polycab.

Providing External Electrification to the DPO, Suryapet.;Supply and transportation of 90W LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >100 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with warranty 50,000 burning hours. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates but excluding GST. LUMINAIRE MAKE : CROMPTON / HAVELLS / WIPRO. LED MAKE : CREE / NICHIA / OSRAM. Model No: NEXUS NEO CRP-404-90-57-SL-GL-NSG or ENDURA PEARL PLUS 90W NDPD or its equivalent model of above makes.

Providing External Electrification to the DPO, Suryapet.;Supply and fixing of 10A SP MCB - 1 No in existing M.S. box with Din channel, 4 way 63A connector including cost & conveyance of all materials and labour charges etc., complete but excluding GST. Make: Legrand / L&T / Siemens.

Providing External Electrification to the DPO, Suryapet.;Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtrx0.45Mtrsx1.20 Mtr size M20 CC work vibrated concreting mixing with necessary steel (10kgs) reinforcement as directed by the field engineers during execution including centering, decentering, water curing as required, soil exacavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance of materials etc. complete but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Fabrication, Transportation and Supply of 1.5 Mtr sword type or any decorative Double arm bracket with dooms complete with all accessories with MS galvanized 50mm dia Pipe but excluding GST. Makes: BAJAJ / TRANSRAIL.

Providing External Electrification to the DPO, Suryapet.;Fabrication, Transportation and Supply of 1.5 Mtr sword type or any decorative Single arm bracket with dooms complete with all accessories with MS galvanized 50mm dia Pipe but excluding GST. Makes: BAJAJ / TRANSRAIL.

Providing External Electrification to the DPO, Suryapet.;Fabrication, Transportation and Supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including chain for anti theft mechanism, supply of suitable boards with bakelite sheet, din channel for MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.50 Mtrs height Pole having dimensions Bottom 130mm, Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700mm long 'J' bolts along with template but excluding GST Makes: BAJAJ / TRANSRAIL.

Providing External Electrification to the DPO, Suryapet.;Supply of 2.5 Sqmm (36/0.3) 8 Core PVC Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc., complete but excluding GST. Makes : Finolex / RR kabel / Polycab.

Providing External Electrification to the DPO, Suryapet.;DG SET: Supply, Transportation, Erection and Commissioning (Excluding Foundation) of 3 Phase, 415, 50Hz, water cooled multi cylinder diesel generator set with alternator of 125KVA/ 100 KW out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete with AMF panel having IP-52 protection, Acoustic Enclosure as per CPCB norms, sound absorbing material, to restrict sound level up to 75 dB up to 1 mtr distance and as per CPCB norms etc as per following specifications mentioned below but excluding GST. 125 KVA, 3 Phase, 415, 50 Hz, 154 BHP, water cooled multy cylinder diesel generator set with alternator of 125 KVA output continious rating at 0.8 p.f. Batteries. A. Alternator : Kirloskar / Stamford / Crompton Greaves : Make. The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21. B. Diesel Engine : Kirloskar / Cummins / Greaves Cotton Diesel Engine start, developing suitable 154 BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 125 KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc. 01. Exhaust pipe of required size and length with insulation or clading. 02. Diesel tank suitable for 8 to 12 Hours running capacity. 03. Residential Silencer. 04. SMF Batteries with leads as per the Manufacturer standards. C. AMF Control Panel:- AMF control panel shall be fabricated with 16SWG CRCA sheet shall be totally enclosed with dust and Vermin proof, floor mounted / wall mounted type and shall be comprising the following. 01. Voltmeter with selector switch. 02. 4 Pole MCCB incomer of 250 A, 35/36 KA rating of Schenieder / L&T / Legrand make for EB and DG. 03. Ammeter with selector switch with CTs. 04. PF Meter and frequency Meter. 05. Indicator lamps (set Run, Load ON) with fuses. 06. KWH Meter of required rating. 07. Set of control fuses and current transformer. 08. Input Terminal board and output Terminal Board. 09. Battery charger with transformer rectifier unit. 10. Alternator supply air break contactor of L&T make. 11. Main supply air break contactor of 250A L&T / SOCOMEC/HPL make. 12. Audio Visual announciation . 13. Main supply voltage set of control relays and timers with one mode selector switch, set of push buttons. 14.Control Copper FRLS cable up to 15 Mtrs 2.5Sqmm 6 Core. (Polycab : Make)

Providing External Electrification to the DPO, Suryapet.;Supplying of Pair of rubber hand gloves suitable for working on 11/22KV but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Providing of Shock instrution chart in English / Hindi / Telugu duly framed with front glass but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Providing of Danger Notice Plates of size 250x200mm, shall comply with IS:2551-1982 but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Supply of First Aid Box 18''X12''X8'' but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Supply and fixing of ABC Powder MAP 4 Kg Fire extinguisher Mono ammonium phosphate power 90, stored pressure type, IS 15683 : 2006, pressure gauge gross wt. 6.9 kg, empty wt.2.9 kg, can Ht.440mm, Diameter 140mm, Discharge time less than 13 sec, controllable discharge mechanism, range min. 4 mts applicable on classes A,B, C & electrically started fires, A- rating 3A, B-rating 34B, can construction: Deep drawn Co2 mig welding, wall construction: Forging & Machining, internal coating of can: Epoxy power coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness:1.60mm, Helium leakage detection tested, ISI & CE approved with 5 years warranty (Cease Fire / Minimax make) Including transportation, all taxes and all labour charges etc complete but excluding GST. Makes : Cease Fire / Minimax

Providing External Electrification to the DPO, Suryapet.;Providing floor mounting stand for keeping 4No of fire bucket 1500mm length, 900mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of enamel paint but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Supply of round bottom G.I sheet bucket of 9 Ltrs. Capacity as per IS:2546 made out of 24 gauge GI sheet with extra handle at bottom duly painted inside and red out side with printed with FIRE Mark for stand and hook and filled with sand and arranged to existing stand or hook (MR ) but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Supply and Run of 40mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Supply and Run of 32mm x 6mm copper strip including cost of all accessories and labour charges etc., complete but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia 'B' Class G.I Pipe of 2.5Mtr length as per National Electric Code and earth connection from electrode GI strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mm X 450mm X 400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II) but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Providing CTPT plinth 600mm x 600mm x 2.1 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top duly plastered 20mm thick outsides including watering etc., complete but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Providing transformer plinth 1.2 x 1.2 x 1.5 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top and 225mm thick wall constructed in stone masonry and remaking hallow portion shall be filled with stone chips duly plastered 20mm thick outsides including watering etc., complete but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Providing and spreading stone metal 40mm size for 100 mm depth above the ground level but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Refilling with carted gravel in transformer yard with an initial leed in layers not exceeding 150mm thick consolidating each deposited layer by water completeing levelling surface dressing including incidental operational labour charges etc.,complete but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Supply and erecting double leaf hinged door each 150cms width x 185cms height using 38.1 mm dia B grade ISI marked G.I pipe from all four sides with necessary bends with cross supports of angle iron 40 x 40 x 6mm with the door leaf covered with chain link mesh of No. 8 SWG G.I wire with necessary flat iron covering all around frame. The door shall have heavy latches, and side channels of 100x50x5mm locking arrangement with lock of medium size with duplicate keys, the fencing completely erected with anti corrosive red oxide paint and two coats of prescribed enamel paint / silver paint. The channel iron of size 100x50mm x 2.5Mtr. length shall be provided and erected at both sides of gate with C.C work but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Supply and erecting 50x50x6mm angle iron as corner support to be fixed away from the fence support fixed at the middle of the fencing frame and the other side in CC foundation of 15x15x40 cms complete duly painted with one coat of red oxide and two coats of aluminium paint but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Supply and erecting fencing of section having size 2450 mm in height from ground level and 1200mm width by using angle iron size 50x50x6mm erected in CC foundation 15x15x40cms deep. The section of the frame shall be fitted with flat iron supports of size 25x6mm on top, bottom and middle and chain link jali of 8 SWG G.I to the angle iron at every distance of 30 cms by iron studs complete duly painted with one coat of red oxide and two coats of aluminium paint but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Plastering to superstructure 20mm thick in cm with a base coat of 16mm thick in cm (1:6) prop. And top coat of 4mm thick in cm (1:4) prop. With double sponge finishing complete including making grooves cost and conveyance of all materials to site, labour charges, scaffolding, curing, lift charges and all other incidental and operational charges etc., complete but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Poviding Maonary work in CM(1:4) Prop. With Flyash cement solid blocks of size 290X100X140mm for manufacturing of flyash solid blocks using flyash of 80Kgs cement of 15 Kgs gypsum of 5 kgs and stone dust including cost and conveyance of all materials labour charges seiniorage charges scaffolding and curing etc., complete. with a compressive strength not less than 50 kg/sqm for walls for superstructure walls. 100mm thick Ground floor but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Randum Rubble stone masonry with granite stone in CM(1:6) Prop. Including cost and conveyance of all materials to site , seignorage, labour charges, curing etc., complete for foundations for finished item of work (APSS No.601 & 603) but excluding GST.

Providing External Electrification to the DPO, Suryapet.;CC (1:5:10) prop. Using 40mm gauge hard granite metal from approved quarry including cost and conveyance of all materials to site and labour charges for laying, ramming curing etc., complete but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Earth work excavation for foundations and depositing on bank with an initial lead of 10m and lift of 2m in hard gravelly and other hard soils except rock requiring blasting and all other kinds of soils such as hard stiff clay, stiff black cotton hard red earth, murram ordinary gravel including shoring, strutting dewatering etc., complete for finished item of work for foundations (APSS no.308) but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Supply and laying of 300mm dia (NP2) (PH Rate) RCC Hume pipe with Collars for Road crossings etc., complete but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Labour charges for run of U.G. cables on wall / stoneware / Hume pipe with necessary fixing arrangements such as saddles, clamps, wooden seperators etc., (As directed by departmental official) complete for the cables but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Earth work excavation of Trench in hard ground soil, laying of U.G cables from 70 Sqmm to 400 sqmm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete but excluding GST.

Providing External Electrification to the DPO, Suryapet.;Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket suitable for 3.5 core XLPE armoured cable for 150 Sqmm with brass washers and crimping type aluminium lugs confirming to I.S specifications for cable of 150 Sqmm including nuts and bolts with connections etc., complete but excluding GST. Makes: SMI / Commet / Dowels.

Providing External Electrification to the DPO, Suryapet.;Supply of 3.5 Core 150 Sqmm XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) but excluding GST. Makes: Torrent / Polycab / Universal.

Providing External Electrification to the DPO, Suryapet.;Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket suitable for 3.5 core XLPE armoured cable for 240 Sqmm with brass washers and crimping type aluminium lugs confirming to I.S specifications for cable of 240 Sqmm including nuts and bolts with connections etc., complete but excluding GST. Makes: SMI / Commet / Dowels.

Providing External Electrification to the DPO, Suryapet.;Supply of 3.5 Core 240 Sqmm XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) but excluding GST. Makes: Torrent / Polycab / Universal.

Providing External Electrification to the DPO, Suryapet.;Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket suitable for 3.5 core XLPE armoured cable for 300 Sqmm with brass washers and crimping type aluminium lugs confirming to I.S specifications for cable of 300 Sqmm including nuts and bolts with connections etc., complete but excluding GST. Makes: SMI / Commet / Dowels.

Providing External Electrification to the DPO, Suryapet.;Supply of 3.5 Core 300 Sqmm XLPE Insulated 1100V gradearmoured Cable, as per IS specification confirming to IS:7098 (Part - I) but excluding GST. Makes : Torrent / Universal / Polycab.

Providing External Electrification to the DPO, Suryapet.;Providing and errecting heat shrinkable outdoor termination kit for 11 KV XLPE HT cable 3 core 240 Sqmm with necessary materials etc., complete with anti tracking red colour material as per IEC / IS specs only but excluding GST. Makes : Raychem / M Seal.

Providing External Electrification to the DPO, Suryapet.;Providing and errecting heat shrinkable indoor termination kit for 11 KV XLPE HT cable 3 core 240 Sqmm with necessary materials etc., complete but excluding GST. Makes: Raychem / M seal.

Providing External Electrification to the DPO, Suryapet.;Supply of 3 Core 11 KV 240 Sqmm HT XLPE (E) Insulated 11000 V gradearmoured Cable, as per IS specification confirming to IS 7098/II/85 with latest ammendments but excluding GST. Makes : Torrent / Universal / Polycab.

Providing External Electrification to the DPO, Suryapet.;DPO Block - A & B Sub-Distribution Panel Board: Fabrication, Transportation, Supply, Installation, Testing and Commissioning of suitable size, Indoor type panel of 14 guage CRCA sheet Make : TATA / JINDAL for termination of 2R 3.5C x 240 Sqmm alluminium cables with the following incorporated in the panel for Distributing the power supply but excluding GST. (The Contractor shall submit shop drawings before fabrication of Panel for approval of Tendering Authority. The Contractor shall arrange pre-inspection at workshop before despatch) Main incoming: 1) Supply and fixing of 400A 4 Pole MCCB, 35/36KA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36KA with thermal magnetic release Panel Mounted - 1 No. Makes: Siemens / L&T / ABB. Aluminium Bus bar Size: 100mm X 6mm x suitable length -4 Nos for mains (RYBN) and links to 400A MCCB, 50mm X 6mm X 1 Run x suitable length - 4 Nos links (RYBN) for 160A FP MCCBs. 40mm X 6mm X 1 Run x suitable length - 4 Nos links (RYBN) for links to 125A FP MCCBs. 25mm X 6mm X 1 Run x suitable length - 4 Nos links (RYBN) for 63A FP MCCBs & MCBs. Required Accessories: Supply and erection of 0-415V Volt Digital meter on exisiting panel board including connections etc., complete - 1 No. MAKES : CONZERVE / L&T / SEIMENS. Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital Ammeter of size 96x96mm on existing panel board including connections etc., complete - 1 No. MAKES : CONZERVE / L&T / SEIMENS. Supply and erection of L.T. 3 phase Digital multifunction bidirectional import / export energy meter Class I RS 485 with LCD display for measuring all the parameters (Voltage, Current, Frequency, Power factor, KW, KVA, KWH, KVA, KVAH, KVAR and THD Events) on existing box panel board including connections etc., complete - 1No. MAKES : CONZERVE / L&T / SEIMENS. Supply and fixing of 6-32A SP MCB 10KA, C/D Curve ISI Mark - 3 Nos. Makes : Legrand-DX3 / Schneider-Acti9 / L&T. GI Strip for extended earth terminals 40mm x 6mm of required length, Base channel 75mm x 40mm of required length. Outgoings: 1) Supply and fixing of 160A 4 Pole MCCB, 25KA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25KA with thermal magnetic release Panel Mounted -1 No. Makes: Siemens / L&T / ABB. 2) Supply and fixing of 125A 4 Pole MCCB, 25KA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25KA with thermal magnetic release Panel Mounted - 1 No. Makes: Siemens / L&T / ABB. 3) Supply and fixing of 63A 4 Pole MCCB, 16KA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 16KA with thermal magnetic release Panel Mounted - 15 Nos. Makes: Siemens / L&T / ABB. 4) Supply and fixing of 63A 4 Pole MCB, 10KA, C/D Curve ISI Mark - 4Nos. Makes : Legrand-DX3 / Schneider-Acti9 / L&T Exora. The Panel Size approx: 1.95 RM (W) X 1.80 (H) X 0.60 RM (D) The connections of 400A MCCB,125A and 63A MCCB's, 63A 4P MCBs should be done with above mentioned Bus bar strips with bottom/Top entry cables. The control wiring for metering shall be done with 2.5sqmm copper FRLS flexible cable of Polycab / Finolex / RR Kabel: Make. The above Panel shall be cleaned with 7 tank process and painting with one coat of red oxide and two coats of powder coated light grey as per IS 631 of (5) etc complete and provided suitable base channel of 75X40X6mm size on existing trench / brick masonary pedastals CM(1:4) etc., complete as directed by the Engineer- in - Charge.

Providing External Electrification to the DPO, Suryapet.;DPO Main Distribution Panel Board: Fabrication, Transportation, Supply, Installation, Testing and Commissioning of suitable size, Indoor type panel of 14 guage CRCA Make : TATA / JINDAL sheet for termination of 4R x 3.5C x 300 Sqmm aluminium cables with the following incorporated in the panel for Distributing the power supply but excluding GST. (The Contractor shall submit shop drawings before fabrication of Panel for approval of Tendering Authority. The Contractor shall arrange pre-inspection at workshop before despatch) Main incoming: 1) Supply and fixing of 1000A, 4 Pole, Automatic operated transfer switch (ATYS) Conforms to IEC 60947-6-1 Class PC, IEC 60947-3 - 1 No. Makes : SOCOMEC / L&T/ Elmeasure. Model : ATyS A - 95154100SL. 2) Supply and fixing of 1000A 4 Pole, 50kA, electrically drawout Air Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection. Makes : Siemens / L&T /ABB. Aluminium Bus bar Size: 150mm X 12mm x 1Run suitable length - 4 Nos for mains for RYBN, 150mm X 12mm x 1 Run suitable length - 4 Nos for links (RYBN) to 1000A ACB, 100mm X 6mm x 1 Run suitable length - 4 Nos for links (RYBN) to 400A MCCB, 50mm X 10mm x 1 Run suitable length - 4 Nos for links (RYBN) to 250A MCCB. Required Accessories: Supply and erection of 0-415V Volt Digital meter on exisiting panel board including connections etc., complete - 1 No. MAKES : CONZERVE / L&T / SEIMENS. Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital Ammeter of size 96x96mm on existing panel board including connections etc., complete - 1 No. MAKES : CONZERVE / L&T / SEIMENS. Supply and erection of L.T. 3 phase Digital multifunction bidirectional import / export energy meter Class I RS 485 with LCD display for measuring all the parameters (Voltage, Current, Frequency, Power factor, KW, KVA, KWH, KVA, KVAH, KVAR and THD Events) on existing box panel board including connections etc., complete - 1No. MAKES : CONZERVE / L&T / SEIMENS. Supply and fixing of 6-32A SP MCB 10KA, C/D Curve ISI Mark -3 Nos. Makes : Legrand-DX3 / Schneider-Acti9 / L&T. Supply and erection of Push buttons on the existing panel board - 3 Nos. Makes : L&T / SALZAR. Supply and erection of Selector switch for Voltmeter / Ammeter on the existing panel including connections etc., complete - 2 Nos. Makes : L&T / SALZAR. Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing panel including connections etc., complete - 3 Nos. MAKE : KAPPA. Heat shrinkable sleeves for the Bus bars (RYBN) of required length. Supply and erection of LED indication lamps on the existing panel board - 5 Nos. Makes : L&T / SALZAR. Supply and fixing of SMC type supports for the bus bars 60 x 70 x 14mm - 16 Nos. GI Strip for extended earth terminals 40mm x 6mm of required length, Base channel 75mm x 40mm of required length. Outgoings: 1) Supply and fixing of 400A 4 Pole MCCB, 35/36KA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36KA with thermal magnetic release Panel Mounted - 3 Nos. Makes: Siemens / L&T / ABB. 2) Supply and fixing of 250A 4 Pole MCCB, 35/36KA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36KA with thermal magnetic release Panel Mounted - 1 No. Makes: Siemens / L&T / ABB. The Panel Size approx: 2.05 RM (W) X 1.80 RM (H) X 0.80 RM (D) The connections of 1000A Auto Transfer Switch (ATyS) and 1000A ACB, 400A MCCB and 250A MCCB should be done with above mentioned Bus bar strips with bottom / Top entry cables. The control wiring for metering shall be done with 2.5sqmm copper FRLS flexible cable of Polycab / Finolex / RR Kabel: Make. The above Panel shall be cleaned with 7 tank process and painting with one coat of red oxide and two coats of powder coated light grey as per IS 631 of (5) etc complete and provided suitable base channel of 75X40X6mm size on existing trench / brick masonary pedastals CM(1:4) etc., complete as directed by the Engineer- in - Charge.

Providing External Electrification to the DPO, Suryapet.;Main LT Panel: Fabrication, Transportation, Supply, Installation, Testing and Commissioning of suitable size, Indoor type panel of 14 guage CRCA sheet Make : TATA / JINDAL for main frame, doors & internal partitions and termination of (4R provision) x 3.5 C x 300 Sqmm aluminium cables with the following incorporated in the panel for Distributing the power supply. (The Contractor shall submit shop drawings before fabrication of Panel for approval of Tendering Authority. The Contractor shall arrange pre-inspection at workshop before despatch) Main incoming: Supply and fixing of 1000A 4 Pole, 50kA, electrically drawout Air Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection - 1 No. Makes : Siemens / L&T / ABB. Busbar & Links: 1000A Aluminium Bus bar Mains -(150mm X 12mm x 1 Run x suitable length - 4Nos) - Mains (RYBN) (100mm X 6mm X 1 Run x suitable length - 4 Nos) links (RYBN) for 400A FP MCCBs. (50mm X 10mm X1 Run x suitable length - 4 Nos) links (RYBN) for 250A FP MCCBs. (50mm X 6mm X 1 Run x suitable length - 4 Nos) links (RYBN) for 160A FP MCCBs. (40mm X 6mm X 1 Run x suitable length - 4 Nos) links (RYBN) for links to 125A FP MCCBs. (25mm X 6mm X 1 Run x suitable length - 4 Nos) links (RYBN) for 63A FP MCCBs. Required Accessories: Supply and erection of 0-415V Volt Digital meter on exisiting panel board including connections etc., complete - 3 Nos. MAKES : CONZERVE / L&T / SEIMENS. Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital Ammeter of size 96x96mm on existing panel board including connections etc., complete - 3 Nos. MAKES : CONZERVE / L&T / SEIMENS. Supply and erection of L.T. 3 phase Digital multifunction bidirectional import / export energy meter Class I RS 485 with LCD display for measuring all the parameters (Voltage, Current, Frequency, Power factor, KW, KVA, KWH, KVA, KVAH, KVAR and THD Events) on existing box panel board including connections etc., complete - 1No. MAKES : CONZERVE / L&T / SEIMENS. Supply and fixing of 6-32A SP MCB 10KA, C/D Curve ISI Mark - 9 Nos. Makes : Legrand-DX3 / Schneider-Acti9 / L&T. Supply and erection of Push buttons on the existing panel board - 9 Nos. Makes : L&T / SALZAR. Supply and erection of Selector switch for Voltmeter / Ammeter on the existing panel including connections etc., complete - 6 Nos. Makes : L&T / SALZAR. Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing panel including connections etc., complete - 9 Nos. MAKE : KAPPA. Heat shrinkable sleeves for the Bus bars (RYBN) of required length. Supply and erection of LED indication lamps on the existing panel board - 9 Nos. Makes : L&T / SALZAR. Supply and fixing of SMC type supports for the bus bars 60 x 70 x 14mm - 28 Nos. GI Strip for extended earth terminals 40mm x 6mm of required length, Base channel 75mm x 40mm of required length. Outgoings : 1) Supply and fixing of 1000A 4 Pole, 50kA, electrically drawout Air Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection - 2 Nos. Makes: Siemens / L&T / ABB. 2) Supply of 630A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36KA with thermal magnetic release Panel Mounted - 1 No. Makes : Siemens / L&T / ABB. 2) Supply and fixing of 400A 4 Pole MCCB, 35/36KA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36KA with thermal magnetic release Panel Mounted - 1 No. Makes: Siemens / L&T / ABB. 3) Supply and fixing of 250A 4 Pole MCCB, 35/36KA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36KA with thermal magnetic release Panel Mounted - 2 Nos. Makes: Siemens / L&T / ABB. 4) Supply and fixing of 160A 4 Pole MCCB, 25KA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25KA with thermal magnetic release Panel Mounted - 2 Nos. Makes: Siemens / L&T / ABB. 5) Supply and fixing of 125A 4 Pole MCCB, 25KA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25KA with thermal magnetic release Panel Mounted - 2 Nos. Makes: Siemens / L&T / ABB. 6) Supply and fixing of 63A 4 Pole MCCB, 16KA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 16KA with thermal magnetic release Panel Mounted - 3 Nos. Makes: Siemens / L&T / ABB. The Panel Size approx: 3.20 RM (W) X 1.80 RM (H) X 0.8 RM (D) The connections of 1000A ACBs, 630A MCCBS, 400A MCCBs, 250A MCCBs, 160A MCCBs, 125A MCCBs and 63A MCCBs should be done with Bus bar strips with bottom entry cables. The control wiring for metering shall be done with 2.5sqmm copper FRLS flexible cable of Polycab / Finolex / RR Kabel: Make. The above Panel shall be cleaned with 7 tank process and painting with one coat of red oxide and two coats of powder coated light grey as per IS 631 of (5) etc complete and provided suitable base channel of 75X40X5mm size on existing trench / brick masonary pedastals CM(1:4) etc., complete as directed by the Engineer- in - Charge.

Providing External Electrification to the DPO, Suryapet.;LT Kiosk (1000A) ACB for 500 KVA Distribution Transformer: Fabrication, Transportation, Supply, Installation, Testing and Commissioning of suitable size, plinth mounting outdoor type LT Distribution panel of 14 guage CRCA sheet Make : TATA / JINDAL for doors & internal partitions and termination of (4R provision) 3.5C x 300 Sqmm aluminium cables with the following incorporated in the panel for Distributing the power supply but excluding GST. (The Contractor shall submit shop drawings before fabrication of Panel for approval of Tendering Authority. The Contractor shall arrange pre-inspection at workshop before despatch) Main incoming: Supply and fixing of 1000A 4 Pole, 50kA, electrically drawout Air Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection - 1No. Makes : Siemens / L&T / ABB. Aluminium Bus bar 150mm x 12mm x 1 Run x Suitable length - 4 Nos for Mains (RYBN) Required Accessories: Supply and erection of 0-415V Volt Digital meter on exisiting panel board including connections etc., complete - 1No. MAKES : CONZERVE / L&T / SEIMENS. Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital Ammeter of size 96x96mm on existing panel board including connections etc., complete - 1No. MAKES : CONZERVE / L&T / SEIMENS. Supply and erection of L.T. 3 phase Digital multifunction bidirectional import / export energy meter Class I RS 485 with LCD display for measuring all the parameters (Voltage, Current, Frequency, Power factor, KW, KVA, KWH, KVA, KVAH, KVAR and THD Events) on existing box panel board including connections etc., complete - 1No. MAKES : CONZERVE / L&T / SEIMENS. Supply and fixing of 6-32A SP MCB 10KA, C/D Curve ISI Mark -3 Nos. Makes : Legrand-DX3 / Schneider-Acti9 / L&T. Supply and erection of Push buttons on the existing panel board - 3Nos. Makes : L&T / SALZAR. Supply and erection of Selector switch for Voltmeter / Ammeter on the existing panel including connections etc., complete - 2 Nos. Makes : L&T / SALZAR. Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing panel including connections etc., complete - 3 Nos. MAKE : KAPPA. Heat shrinkable sleeves for the Bus bars (RYBN) of required length. Supply and erection of LED indication lamps on the existing panel board - 3 Nos. Makes : L&T / SALZAR. Supply and fixing of SMC type supports for the bus bars 60 x 70 x 14mm - 8 Nos. GI Strip for extended earth terminals 40mm x 6mm of required length, Base channel 75mm x 40mm of required length. The Panel Size approx: 0.8 RM (W) x 1.65RM (H) x 0.8 RM (D) The connections of 1000A ACB shall be done with Bus bar strips with bottom entry cables. The control wiring for metering shall be done with 2.5sqmm copper FRLS flexible cable of Polycab / Finolex / RR Kabel: Make. The above Panel shall be cleaned with 7 tank process and painting with one coat of red oxide and two coats of powder coated light grey as per IS 631 of (5) etc complete and provided suitable base channel of 75x40x6mm size on suitable brick pedastal CM(1:4) of size 0.2 RM (W) x 1.10 RM (L) x 1.0 RM (H) (0.6mtr AGL + 0.4mtr BGL) etc., complete as directed by the Engineer- in - Charge but excluding GST.

Providing External Electrification to the DPO, Suryapet.;D.P STRUCTURE: Supply, Fabrication, Transportation and erection of DP structure made with 2 Nos 175mm x 85mm ( ISMB Modified ) or equivalent about 30'-0 length / 9.1 mtrs length RS joist pole erection of the same Including excavation of pit in all kinds of soil including breaking stones, concreting with (1:3:6) mixture base plate, coil earthing back filling, 1:2:4 for couping including red oxide primary painting and two coats of aluminium painting etc., complete as required with following as per CEIG norms as directed by the Engineer-in-charge but excluding GST. Make : TATA / JINDAL. a) 400A AB Switch-1No b) HG Fuse sets-1No c) LAS-1set. d) Required Number of 11KV pin and disc insulatiors. e) Required length of 100X50mm and 75X40 mm ISMC chanell iron including two coats of redoxide and two coats of enamil paint ect for finished item of work. f) 11KV pin insulators and disc insulators. g) AB switch operating pipe with handle and lock and key arrangements. h) "0" SWG or 8.25 mm dia hard drawn bare copper wire including copper binding wire etc., complete as required including connections. i) 40X6mm GI strip for the DP structure earthing. j) 25X6mm copper strip for lightning arrestors earthing. k) 600X600mmX3,15mm thick copper plate earthings as per NEC with brick massonary chambers - 2 Nos. l) GI pipe earthing for the Double pole structure with brick massonry chambers as per IS - 2 Nos.

Providing External Electrification to the DPO, Suryapet.;Design, Supply, Installation, Testing and Commissioning 11 KV, rated voltage 12kV, 630A, 21kA/3sec, Outdoor type, extensible, floor mounted with internal copper bus bars, SF6 Insulated, completely Motorised, 3 Way RMU consisting of 3 Nos. 630A 11KV VCB (1No Incomer and 2Nos VCB as outgoing) as with Overload and earth fault protection Relay (Ashidha / CSPDR) with air insulated Metering module (MFM for VCB Feeders). The outgoings shall have Aux relays for transformer and 8 window Annunciation and hooter. All live parts, bus bars are connections of RMU shall be enclosed in one SF6 tank to avoid multiple interconnections. SF6 Tank shall be sealed for life robotically welded nonmagnetic and non ferrite stainless steel Grade 304 of minimum 2.5 mm thick having IP67 degree of protection filled with SF6 gas as insulation with leakage rate less than 0.1% per year tested as per IEC 62271-200. Manual welding or hermetic sealing of tank shall be not be accepted. The unit shall have bottom cable entry (Suitable for termination of 1R x 3C x 95/120/150/240 Sqmm Cable) for ease of installation and shall have site replaceable bushings for ease of troubleshooting during breakdown. RMU should be complete with all accessories such as Terminal boots, VPIS, cable supports, all front cable terminations, mechanical indications for Manometer as per with IEC standards 62271- 200, 60056, 60129, 60265, 60298, 60420, 60529 and 60694. Altitude of installation up to 1000m as per IEC 60120. Bushings bolted type top mounted outside the tank for connection of external bus bar. Also, the outer enclosure shall cover the full length of the switchgear, to ensure IP3X+IP54 protection for cable boxes etc., complete as directed by the Engineer-in-charge but excluding GST. 630A VCB - 03Nos, Capacitive voltage indication fixed type VPIS 6-12 kV-03 Nos, Ring core current transformer type 100/1 A, 2.5VA, 5P10 for Protection - 03Nos (For incoming Feeders) Ring core current transformer type 50-100/1 A, 2.5VA, 1.0 for Metering - 09Nos (For Outgoing Feeders) Digital Multifunction Meter ? Rishabh Make, Cable cover standard with Interlocking - 1Lot, Bus PT 11kV/r3/110/r3, 25VA, Class 1.0 - 03 Nos, Space Heater with Thermostat - 01No, Operating handle - 01No, 2 x 12 V DC Battery and Battery charger - 01Set, (230V AC auxiliary supply for battery charger shall be in purchaser?s scope) Safety Interlocks - As required. (The Contractor shall submit shop drawings before fabrication of Panel for approval of Tendering Authority. The Contractor shall arrange pre-inspection at manufacturing unit for material inspection and testing before despatch) Makes: ABB / Siemens / L&T / Kirloskar.

Providing External Electrification to the DPO, Suryapet.;Supply, Transportation, Installation, Testing and Commissioning of 500KVA TRANSFORMER: The Transformer shall be designed and manufactured as per IS:1180 (Part I) : 2014, Amendment No. 4 On Load Tap Changer with level-I with initial filling of oil as per IS 335-1993 and ISI marked. The basic details of the Transformer are as under but excluding GST. (The Contractor shall arrange pre-inspection at workshop before despatch) Makes: Kirloskar / Esennar / Crompton / PETE / Voltamp. 1. Quantity : 1 2. Rated KVA : 500 KVA 3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed 7. Cooling : ONAN 8. Temp Rise : 40°C in oil 45°C by resistance, 9. Ambient Temperature : 50°C 10. Number of Phases : 3 11. Vector Group: Dyn 11 12. Primary Connection : Delta 13. Primary Volts : 11000 V 14. Primary wires: 3 15. Primary Rated Current : 26.24 A 16. Secondary connection : Star 17. Secondary Volts : 433V 18. Secondary Wires : 4 19. Secondary Rated Current : 666.71 A 20. Class of Insulation: Class "A" 21. Frequency : 50 HZ +/- 3% 22. Insulation Level [kV/Kvp] : HV = 28/75, LV = 3/-- 23. Secondary phases : 3 24. Secondary wires: 4 25. Type of tap changer: ON LOAD Tap changer. 26. Taps on primary winding for primary voltage variation : +10% to -10% in steps of 1.25% of 17 positions. 27. No. of Switch Positions : 17 28. Terminal arrangement. a) HV: HT terminal box as per the site condition. b) LV: Cable box suitable to receive suitable XLPE cable. 29. LV: One separate terminal for earthing. 30. Total Losses at 50% Loading [Watts] [Max] 1510 Watts as per IS 31. Total Losses at 100% Loading [Watts] [Max] 4300 Watts as per IS 32. Percentage Impedance at 75 deg. C at 4.50% as per IS 33. No Load current: Less than 1.5% of Rated current. 34. Standrad Fittings & Accessories. 35. Bushing - IS: 2099 & IS: 3347 a) Porcelain Bushings [HV] : 3 b) Epoxy Bushings [LV] : 4 36. Painting [Finish] : PU Light Grey (631) shade No. 631-IS: 5 37. Overall dimensions of Transformer: 2735 mm x 2160 mm x 1975 mm (L x B x H) 38: Core & Windinga with clamps(Untanking Wt): 1320Kgs Tank & Fittings : 1063 Kgs Oil (Mineral) : 1020 Ltrs (867 Kgs) Total Weight : 3250 Kgs. 39. HV-LT orientation : 180 deg. Standard Fittings & Accessories: 1. Rating and Terminal Marking Plate : One 2. Earthing Terminals : Two 3. Lifting Lugs : Four 4. Drain Valve with Blanking Plate : One 5. Filter Valve with Blanking Plate : One 6. Conservator : One 7. Conservator Oil Filling Hole With Cap : One 8. Oil Level Indicator with Min. Marking : One 9. Dehydrating Breather: One 10. Conservator Drain Plug : One 11. Air Release Device : One 12. Pressure Relief Valve : One 13. Rollers Uni directional : Four 14. Thermometer Pocket : One 15. Radiators Detachable : Two 16. HV Cable Box : One 17. LV Cable Box : One 18. Seperate Neutral Terminal : One 19. ON LOAD Tap Changer : One 20. OTI with Alarm and Trip Contacts : One 21. Buchholz relay with Alarm and Trip Contacts : One 22. Current Transformer : One 23. Radiator Valves : Four 24. Marshalling Box : One 25. W.T.I with Alarm and Trip Contacts : One 26. W.T.I Pocket : One 27. Drain Valve with blanking plate (OLTC) 28. Filter valve with blanking plate (OLTC) 29. OLTC Surge Relay 30. RTCC In Door 31. AVR The above said Transformer is including Supply, Transportation, Installation, Testing and Commissioning charges etc., complete but excluding GST.