Police Housing Corporation Limited Tender

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and transportation of 150 W +/-10% (>=15000 Lumens) LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Suitable lens on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : CROMPTON / Wipro / HAVELLS. LED MAKE :CREE / NICHIA / OSRAM.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Labour charges for run of above UG cable on wall / existing pipe with necessary fixing arrangements such as saddles, clamps, wooden separators etc., (as directed by departmental official) etc., complete but excluding GST. (upto 50Sqmm)

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Earth work excavation of Trench in hard ground soil, laying of U.G cable upto 50 Sqmm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket suitable for 4 core XLPE armoured cable for 10 Sqmm with brass washers and crimping type aluminium lugs confirming to I.S specifications for cable of 10 Sqmm including nuts and bolts with connections etc., complete but excluding GST. Glands Makes: SMI / Commet / Dowels. Lugs Makes: DMI / Jainson / Dowels.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply of 10 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) but excluding GST. Makes : Torrent / Universal / Polycab / Havells.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) but excluding GST. Makes: Torrent / Polycab / Universal.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and fixing of 4.0 Sqmm 3 Core PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990 including all transportation charges etc., complete but excluding GST. Makes : RR kabel / Havells / Polycab / Finolex.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and fixing of 1 No.10A 10KA, C/D Curve ISI Mark SP MCB in existing M.S. box with Din channel, 4way 63A connector including cost & conveyance of all materials and labour charges etc., complete but excluding GST. Make: Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Fabrication, Transportation and supply of 1.5 Mtr sword type or any decorative double arm bracket with dooms made with MS galvanized 50mm dia Pipe etc., complete but excluding GST. Makes: BAJAJ / VALMONT / TRANSRAIL.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Fabrication, Transportation and supply of 1.5 Mtr sword type or any decorative Single arm bracket with dooms made with MS galvanized 50mm dia Pipe etc., complete but excluding GST. Makes: BAJAJ / VALMONT / TRANSRAIL.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Foundation and erection charges with special T&P, for 9.00Mtrs / 10Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtrx0.60Mtrsx1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement as directed by the field engineers during execution including centering, decentering, water curing as required, soil exacavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance of materials etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including chain for anti theft mechanism, supply of suitable boards with bakelite sheet, din channel for MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs height Pole having dimensions Bottom 155mm, Top 70mm with 3mm thick, base plate 260 x 260 x 16mm and 4 Nos of M24 x 750mm long 'J' bolts along with template or equivalent including all accessories etc., complete but excluding GST. Makes: BAJAJ / VALMONT / TRANSRAIL.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal / Conical pole duly erecting on base plate duly provided 4 Nos foundation bolts with nuts with providing of 0.45Mtrx0.45Mtrsx1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement as directed by the field engineers during execution including centering, decentering, water curing as required, soil exacavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance of materials etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including chain for anti theft mechanism, supply of suitable boards with bakelite sheet, din channel for MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.50 Mtrs height Pole having dimensions Bottom 130mm, Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700mm long 'J' bolts along with template or equivalent including all accessories etc., complete but excluding GST. Makes: BAJAJ / VALMONT / TRANSRAIL.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Providing of Shock instrution chart in English / Hindi / Telugu duly framed with front glass but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Providing of Danger Notice Plates of size 250x200mm, shall comply with IS:2551-1982 but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supplying of Pair of rubber hand gloves suitable for working on 11/22KV but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply of First Aid Box 18''X12''X8'' but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and fixing of ABC Powder MAP 4Kg Fire extinguisher Mono ammonium phosphate power 90, stored pressure type, IS 15683 : 2006, pressure gauge gross wt. 6.9 kg, empty wt. 2.9 kg, can Ht.440mm, Diameter 140mm, Discharge time less than 13 sec, controllable discharge mechanism, range min. 4 mts applicable on classes A,B, C & electrically started fires, A- rating 3A, B-rating 34B, can construction: Deep drawn Co2 mig welding, wall construction: Forging & Machining, internal coating of can: Epoxy power coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness:1.60mm, Helium leakage detection tested, ISI & CE approved with 5 years warranty Including transportation, all taxes and all labour charges etc., complete but excluding GST. Makes : Safex / Kenex / Bharat / Reliance.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Providing floor mounting stand for keeping 4No of fire bucket 1500mm length, 900mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of enamel paint includiing all accessories etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply of round bottom G.I sheet bucket of 9 Ltrs. Capacity as per IS:2546 made out of 24 gauge GI sheet with extra handle at bottom duly painted inside and red out side with printed with FIRE Mark for stand and hook and filled with sand and arranged to existing stand or hook includiing all accessories etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply & erecting of 100X50mm size channal for cables support including cost and conveyance of all materials and labour charges etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Providing and spreading stone metal 40mm size for 100 mm depth above the ground level but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Plastering to superstructure 20mm thick in cm with a base coat of 16mm thick in cm (1:6) prop. And top coat of 4mm thick in cm (1:4) prop. With double sponge finishing complete including making grooves cost and conveyance of all materials to site, labour charges, scaffolding, curing, lift charges and all other incidental and operational charges etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Refilling with carted gravel in transformer yard with an initial leed in layers not exceeding 150mm thick consolidating each deposited layer by water completeing levelling surface dressing including incidental operational labour charges etc.,complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Poviding Maonary work in CM (1:4) Prop. With Flyash cement solid blocks of size 290X100X140mm for manufacturing of flyash solid blocks using flyash of 80Kgs cement of 15 Kgs gypsum of 5 kgs and stone dust including cost and conveyance of all materials labour charges seiniorage charges scaffolding and curing etc., complete. with a compressive strength not less than 50 kg/sqm for walls for superstructure walls 100mm thick Ground floor but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Randum Rubble stone masonry with granite stone in CM(1:6) Prop. Including cost and conveyance of all materials to site , seignorage, labour charges, curing etc., complete for foundations for finished item of work (APSS No.601 & 603) but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;CC (1:5:10) prop. Using 40mm gauge hard granite metal from approved quarry including cost and conveyance of all materials to site and labour charges for laying, ramming curing etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Earth work excavation for foundations and depositing on bank with an initial lead of 10m and lift of 2m in hard gravelly and other hard soils except rock requiring blasting and all other kinds of soils such as hard stiff clay, stiff black cotton hard red earth, murram ordinary gravel including shoring, strutting dewatering etc., complete for finished item of work for foundations (APSS no.308) but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II) but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Providing CTPT plinth 600mm x 600mm x 2.1 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top duly plastered 20mm thick outsides including watering etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Providing transformer plinth 1.2 x 1.2 x 1.5 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top and 225mm thick wall constructed in stone masonry and remaking hallow portion shall be filled with stone chips duly plastered 20mm thick outsides including watering etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and laying of 300mm dia (NP2) (PH Rate) RCC Hume pipe with Collars for Road crossings etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and erecting 50x50x6mm angle iron as corner support to be fixed away from the fence support fixed at the middle of the fencing frame and the other side in CC foundation of 15x15x40 cms complete duly painted with one coat of red oxide and two coats of aluminium paint but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and erecting double leaf hinged door each 150cms width x 185cms height using 38.1 mm dia B grade ISI marked G.I pipe from all four sides with necessary bends with cross supports of angle iron 40 x 40 x 6mm with the door leaf covered with chain link mesh of No. 8 SWG G.I wire with necessary flat iron covering all around frame. The door shall have heavy latches, and side channels of 100x50x5mm locking arrangement with lock of medium size with duplicate keys, the fencing completely erected with anti corrosive red oxide paint and two coats of prescribed enamel paint / silver paint. The channel iron of size 100x50mm x 2.5Mtr. length shall be provided and erected at both sides of gate with C.C work including all accessories but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and erecting fencing of section having size 2450 mm in height from ground level and 1200mm width by using angle iron size 50x50x6mm erected in CC foundation 15x15x40cms deep. The section of the frame shall be fitted with flat iron supports of size 25x6mm on top, bottom and middle and chain link jali of 8 SWG G.I to the angle iron at every distance of 30 cms by iron studs complete duly painted with one coat of red oxide and two coats of aluminium paint but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and Run of 75mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and Run of 32mm x 6mm copper strip including cost of all accessories and labour charges etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and Run of 40mm x 6mm copper strip including cost of all accessories and labour charges etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Providing and errecting heat shrinkable outdoor termination kit for 11 KV XLPE HT cable 3 core 150 Sqmm with necessary materials etc., complete but excluding GST. Makes: Raychem / M seal.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Providing and errecting heat shrinkable indoor termination kit for 11 KV XLPE HT cable 3 core 150 Sqmm with necessary materials etc., complete but excluding GST. Makes: Raychem / M seal.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Providing and errecting heat shrinkable outdoor termination kit for 11 KV XLPE HT cable 3 core 240 Sqmm with necessary materials etc., complete but excluding GST. Makes: Raychem / M seal.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Providing and errecting heat shrinkable indoor termination kit for 11 KV XLPE HT cable 3 core 240 Sqmm with necessary materials etc., complete but excluding GST. Makes: Raychem / M seal.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Earth work excavation of Trench in hard ground soil, laying of U.G cables from 70 sqmm to 400 Sqmm for laying of Hume pipes amd back filling of trench including cost and conveyance of materials and labour charges etc., complete but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket suitable for 3.5 core XLPE armoured cable for 240 Sqmm with brass washers and crimping type aluminium lugs confirming to I.S specifications for cable of 240 Sqmm including nuts and bolts with connections etc., complete but excluding GST. Glands Makes: SMI / Commet / Dowels. Lugs Makes: DMI / Jainson / Dowels.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply of 3.5 Core 240 Sqmm XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) but excluding GST. Makes: Torrent / Universal / Polycab.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket suitable for 3.5 core XLPE armoured cable for 95 Sqmm with brass washers and crimping type aluminium lugs confirming to I.S specifications for cable of 95 Sqmm including nuts and bolts with connections etc., complete but excluding GST. Glands Makes: SMI / Commet / Dowels. Lugs Makes: DMI / Jainson / Dowels.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply of 3.5 Core 95 Sqmm XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) but excluding GST. Makes: Torrent / Universal / Polycab.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply of 150 Sqmm 3 Core HT XLPE (E) insulated 11000 V grade armoured Cable, as per IS specification confirming to IS 7098/II/85 with latest amendments but excluding GST. Makes : Torrent / Universal / Polycab.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply of 240 Sqmm 3 Core HT XLPE (E) insulated 11000 V grade armoured Cable, as per IS specification confirming to IS 7098/II/85 with latest amendments but excluding GST. Makes : Torrent / Universal / Polycab.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;LT Kiosk (400A) ACB for 160 KVA Distribution Transformer: Fabrication, Transportation, Supply, Installation, Testing and Commissioning of suitable size, plinth mounting outdoor type LT Distribution panel of 14 guage CRCA sheet Make : TATA / JINDAL for doors & internal partitions and termination of (4R provision) 3.5C x suitable size aluminium cables with the following incorporated in the panel for Distributing the power supply but excluding GST. (The Contractor shall submit shop drawings before fabrication of Panel for approval of Tendering Authority. The Contractor shall arrange pre-inspection at workshop before despatch) Main incoming : Supply & fixing of 400A 4 Pole MCCB, 35/36KA Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36KA with thermal magnetic release Panel Mounted - 1 No. Makes : L&T- D sine / Schneider-NS NSX /Legrand -DP X3/ Siemens-3V. Aluminium Bus bar: 100mm x 6mm x 1 Run x Suitable length - 4 Nos for Mains. (RYBN) Required Accessories: Supply and erection of L.T. 3 phase Digital multifunction bidirectional import / export energy meter Class I RS 485 with LCD display for measuring all the parameters (Voltage, Current, Frequency, Power factor, KW, KVA, KWH, KVA, KVAH, KVAR and THD Events) on existing box panel board including connections etc., complete - 1No. MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of 0-500V Digital Volt meter on exisiting panel board including connections etc., complete - 1No. MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital Ammeter of size 96x96mm on existing panel board including connections etc., complete - 1 No. MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and fixing of 6-32A SP MCB 10KA, C/D Curve ISI Mark - 3 Nos. Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora. Supply and erection of Push buttons on the existing panel board - 3Nos. Makes : L&T / SALZAR / Siemens. Supply and erection of Selector switch for Voltmeter / Ammeter on the existing panel including connections etc., complete - 2 Nos. Makes : L&T / SALZAR / Siemens. Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing panel including connections etc., complete - 3 Nos. MAKE : KAPPA. Heat shrinkable sleeves for the Bus bars (RYBN) of required length. Supply and erection of LED indication lamps on the existing panel board - 3 Nos. Makes : L&T / SALZAR / Siemens. Supply and fixing of SMC type supports for the bus bars 60 x 70 x 14mm - 8 Nos. GI Strip for extended earth terminals 40mm x 6mm of required length, Base channel 75mm x 40mm of required length. The Panel Size approx: 0.6 RM (W) x 0.8 RM (H) x 0.6 RM (D) The connections of 630A ACB shall be done with Bus bar strips with bottom entry cables. The control wiring for metering shall be done with 1.5sqmm copper FRLS flexible cable of Finolex / RR Kabel / Havells: Make. The above Panel shall be cleaned with 7 tank process and painting with one coat of red oxide and two coats of powder coated light grey as per IS 631 of (5) etc complete and provided suitable base channel of 75x40x6mm size on suitable brick pedastal CM(1:4) of size 0.2 RM (W) x 1.10 RM (L) x 1.0 RM (H) (0.6mtr AGL + 0.4mtr BGL) etc., complete as directed by the Engineer- in - Charge but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;LT Kiosk (630A) ACB for 315 KVA Distribution Transformer: Fabrication, Transportation, Supply, Installation, Testing and Commissioning of suitable size, plinth mounting outdoor type LT Distribution panel of 14 guage CRCA sheet Make : TATA / JINDAL for doors & internal partitions and termination of (4R provision) 3.5C x suitable size aluminium cables with the following incorporated in the panel for Distributing the power supply but excluding GST. (The Contractor shall submit shop drawings before fabrication of Panel for approval of Tendering Authority. The Contractor shall arrange pre-inspection at workshop before despatch) Main incoming : Supply & fixing of 630A 4 Pole, 50kA, electrically drawout Air Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, short circuit and earth fault Protection - 1 No. Makes : Siemens (Sentron- 3W) / L&T U Power / Schneider Master Pact / ABB Emax / Legrand DMX. Aluminium Bus bar: 100mm x 12mm x 1 Run x Suitable length - 4 Nos for Mains (RYBN) Required Accessories: Supply and erection of L.T. 3 phase Digital multifunction bidirectional import / export energy meter Class I RS 485 with LCD display for measuring all the parameters (Voltage, Current, Frequency, Power factor, KW, KVA, KWH, KVA, KVAH, KVAR and THD Events) on existing box panel board including connections etc., complete - 1No. MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of 0-500V Digital Volt meter on exisiting panel board including connections etc., complete - 1No. MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital Ammeter of size 96x96mm on existing panel board including connections etc., complete - 1 No. MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and fixing of 6-32A SP MCB 10KA, C/D Curve ISI Mark - 3 Nos. Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora. Supply and erection of Push buttons on the existing panel board - 3Nos. Makes : L&T / SALZAR / Siemens. Supply and erection of Selector switch for Voltmeter / Ammeter on the existing panel including connections etc., complete - 2 Nos. Makes : L&T / SALZAR / Siemens. Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing panel including connections etc., complete - 3 Nos. MAKE : KAPPA. Heat shrinkable sleeves for the Bus bars (RYBN) of required length. Supply and erection of LED indication lamps on the existing panel board - 3 Nos. Makes : L&T / SALZAR / Siemens. Supply and fixing of SMC type supports for the bus bars 60 x 70 x 14mm - 8 Nos. GI Strip for extended earth terminals 40mm x 6mm of required length, Base channel 75mm x 40mm of required length. The Panel Size approx: 0.8 RM (W) x 1.00RM (H) x 0.8 RM (D) The connections of 630A ACB shall be done with Bus bar strips with bottom entry cables. The control wiring for metering shall be done with 1.5sqmm copper FRLS flexible cable of Finolex / RR Kabel / Havells: Make. The above Panel shall be cleaned with 7 tank process and painting with one coat of red oxide and two coats of powder coated light grey as per IS 631 of (5) etc complete and provided suitable base channel of 75x40x6mm size on suitable brick pedastal CM(1:4) of size 0.2 RM (W) x 1.10 RM (L) x 1.0 RM (H) (0.6mtr AGL + 0.4mtr BGL) etc., complete as directed by the Engineer- in - Charge but excluding GST.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply, Transportation, Installation and Commissioning of 11 KV, 630A, 25 KA Outdoor type Load Break Switch as detailed below with suitable CC foundation and 2 Nos GI pipe earthing with brick massonry chambers etc., complete for finished item of work but excluding GST. a) Load break switch: 11KV,630A, 25 KA with fuse trip, earth switch, manually operated spring chargesd mechanis with 2 no + 2 NC. b) HT HRC fuse upto 63A - 3 nos. c) Bus bar connection. d) Indication lamps. e) Manual trip Push buttion. Make : Megawin / Pentagon.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply, Fabrication, Transportation and erection of DP structure made with 2 Nos 175mm x 85mm ( ISMB Modified ) Make : TATA / JINDAL or equivalent about 30'-0 length / 9.1 mtrs length RS joist pole erection of the same including excavation of pit in all kinds of soil including breaking stones, concretingwith (1:3:6) mixture base plate, coil earthing back filling, 1:2:4 for couping including red oxide primary painting and two coats of aluminium painting etc., complete as required with following as per CEIG norms but excluding GST. a) 400A AB Switch-1No, b) HG Fuse sets-1No, c) LAS-1set, d) Required Number of 11KV pin and disc insulatiors, e) Required length of 100X50mm and 75X40 mm ISMC chanell iron including two coats of redoxide and two coats of enamil paint ect for finished item of work. f) 11KV pin insulators and disc insulators. g) AB switch operating pipe with handle and lock and key arrangements. h) "0" SWG or 8.25 mm dia hard drawn bare copper wire including copper binding wire etc., complete as required including connections. i) 40X6mm GI strip for the DP structure earthing. j) 25X6mm copper strip for lightning arrestors earthing. k) 600X600mmX3,15mm thick copperplate earthings as per NEC with brick massonary chambers - 2 Nos, l) GI pipe earthing for the Double pole structure with brick massonry chambers as per IS - 2 Nos.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Design, Manufacture, Routine Inspection / Testing, and Supplying, Installation and Commissioning of Outdoor 11kV HT VCB Panel as under: 11kV, 25kA for 3Sec/1 sec, Rating panel with 1 No incomer and 3 nos Outgoing panel with Cable Earthing Truck and Bus Earthing Truck (Schneider / ABB / Siemens / L&T) in 2mm thick sheet steel enclosure but excluding GST. (The Contractor shall arrange pre-inspection at workshop before despatch) VCB Incomimg: 11kV,25kA for 3Sec. 800A HT Vaccum Circuit Breaker with CC / TC ?110V DC, Motor- 230 AC, with manual trip, anti pumping device, closing device, operation counter, Rack in & out handle, Trip Rod - 1No. Make: Schneider / ABB / Siemens / L&T. Outgoing: 11kV,25kA for 3Sec. 800A HT Vaccum Circuit Breaker with CC / TC ?110V DC, Motor- 230 AC, with manual trip, anti pumping device, closing device, operation counter, Rack in & out handle, Trip Rod, (O/G-2 Nos & O/G Tranfo-1 No) Make: Schneider / ABB / Siemens / L&T. Busbars : Al Busbars with Suitable Rating 2500 Amps. Current Transformer and Potential Transformer: Single Phase Current transformer STC 26.3kA/1S Ratio: 150/5-5A, Core1: 10VA, CL-1, Core 2: 10VA, CL5P10 Incoming 3Nos, Outgoing 6Nos Make: ECS / Precise / Pragati / AE. Single Phase Current transformer STC 26.3kA/1S Ratio: 30/5-5A , Core1: 5VA, CL-1, Core 2: 5VA, CL 5P10 - Outgoing Trafo 3Nos Make: ECS / Precise / Pragati / AE. Single phase Voltage transformer with ratio of 11kV/RT3/110V/RT3/, 50VA, CL-0.2,100VA, 3P Open delta - Incoming 3Nos. Make: ECS/Precise/Pragati /Fibre& Fibre. Meters: Digital Ammeter with inbuilt selector switch - Incoming 1Nos, Outgoing 2Nos, Outgoing Trafo - 1No. Make: Schneider / ABB / Siemens / L&T. Digital Voltmeter with inbulit selector switch - Incoming 1No Make: Schneider / ABB / Siemens / L&T. Digital Multifunction Meter Incoming 1Nos,Outgoing 2Nos, Outgoing Trafo - 1No. Make: Make: Schneider / ABB / Siemens / L&T. Annunciator with Hooter: 8 Window Annunciator with Hooter - Incoming 1No, Outgoing 2NosMake: Alan. 12 Window Annunciator with Hooter Outgoing Trafo 1No Make: Alan. Power pack with 230AC Input and 110V DC Output-Incoming 1No, Outgoing 2Nos,Outgoing Trafo -1No Make: Alan. Surge Arrester-Outgoing Trafo 3Nos Make: Sri Radhe. Relays: Numerical protection: 50,51,67,50HS,49,50N,51N,67N,32,37, 27,59,59N,81,81U,81R,68F2,68H5,50BF,25,CTS,VTS,TCS, with RS485 P3U30/Equiv - Incoming 1No. Make: Schneider / ABB / Siemens / L&T. Numerical protection 50 / 51 / 50 N / 51 N /50G, 95 with Trip Circuit Supervision with RS485 - Outgoing 2Nos, Outgoing Trafo 1No.Make: Schneider / ABB / Siemens / L&T. Master Trip Relay(86) VAJH13 - Incoming 1Nos, Outgoing 2Nos,Outgoing Trafo 1Nos Make: Schneider / ABB / Siemens / L&T. Aux contactor relay for Antipumping & DC Fail.-Incoming 1Nos, Outgoing 2Nos,Outgoing Trafo 1Nos Make: Schneider / ABB / Siemens / L&T. Auxilliary Relay for Trafo faults - Outgoing Trafo 3Nos Make: Schneider / ABB / Siemens / L&T. Switches and other items: RYB Indication Lamp - Incoming 1No Make: Schneider / ABB / Siemens / L&T. LED indicating Lamp, 110V DC, for CB ON, OFF, TRIP, TCH, SPRING CHARGE - Incoming set1,Outgoing Set2, Outgoing Trafo 1set Make: Schneider / ABB / Siemens / L&T. Local Remote selector switch -Incoming 1Nos, Outgoing 2Nos,Outgoing Trafo - 1No. Make: KAYCE/SWITRON. TNC switch -Incoming 1No, Outgoing 2Nos, Outgoing Trafo 1No. Make: KAYCE/SWITRON. Emergency Trip push button - Incoming 1Nos, Outgoing 2Nos,Outgoing Trafo - 1No. Make: TEKN. MCBs For Control Ckt. As required Incoming lot1, Outgoing Lot2,Outgoing Trafo 1lot Make: Schneider / ABB / Siemens / L&T / MDS Legrand. Thermostat & Spaceheater Incoming set1, Outgoing Set2, Outgoing Trafo - 1set. Make: APT. Panel Light LED TYPE, with DLS - Incoming set1,Outgoing Set2,Outgoing Trafo - 1set. Make: BAJAJ / Phillips/ Wipro. LT Chamber Sheetmetal, Terminals, Wires and other BOC Incoming 1Nos, Outgoing 2Nos, Outgoing Trafo - 1No. HT Panel with 2mm thick sheet steel enclosure suitable for 11kV, 25KA for 1Sec Outdoor type-RAL 7032 Incoming 1Nos, Outgoing 2Nos, Outgoing Trafo - 1No.

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and Transportation of 160 KVA Copper Wound Transformer with all test reports. The Transformer shall be designed and manufactured as per IS:1180 OCTC with level - I with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under but excluding GST. Makes: Kirloskar / PETE / Esennar / Voltamp. (The Contractor shall arrange pre-inspection at workshop before despatch) 1. Quantity : 1 2. Rated KVA : 160 KVA 3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed 7. Cooling : ONAN 8. Temp Rise : 40°C in oil, 45°C by resistance 9. Vector Group: Dyn 11 10. Primary Connection : Delta 11. Nominal Voltage / Current : 12. Highest system Voltage: 12000V 13. Primary Frequency :50 HZ +/- 3% 14. Number of Phases : 3 15. Primary wires: 3 16. Secondary connection : Star 17. Secondary Volts / Current : 433V 18. Secondary phases : 3 19. Secondary wires: 4 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps) 21. Terminal arrangement. a.HV: HT terminal box as per the site condition. b. LV: Cable box suitable to receive suitable XLPE cable 22. LV: One separate terminal for earthing. 23. Total Losses at 50% Loading [Watts] [Max] --- as per IS 24. Total Losses at 100% Loading [Watts] [Max]--- as per IS 25.Percentage Impedance at 75 deg. C at ----- as per IS 26. No Load current: Less than 2% of full load current. 27. Standrad Fittings & Accessories. a. Rating and terminal marking plate : One b. Lifting Lugs : Two c. Off-circuit tap switch : One d. Earthing Terminals : Two e. Radiators ( Attachable): Adequate f. Explosion vent with Diaphragm : One g. Conservator with Drain plug: One h. Oil filling hole with cap : One i. Oil level indicator : One j. Dehydrating Silicagel Breather : One k. Terminal Arrangement : HV With Treminal Box l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Filter valve with blanking plate : One o. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : One r. Four :Unidirectional flat rollers s. One :10 cm dial thermometer (Rigid stem type)

External Electrification and Street lighting to OCTOPUS Commando Training Center.;Supply and Transportation of 315 KVA Copper Wound Transformer with all test reports. The Transformer shall be designed and manufactured as per IS:1180 OCTC with level - I with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under but excluding GST. Makes: Kirloskar / PETE / Esennar / Voltamp. (The Contractor shall arrange pre-inspection at workshop before despatch) 1. Quantity : 1 2. Rated KVA : 315 KVA 3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed 7. Cooling : ONAN 8. Temp Rise : 40°C in oil, 45°C by resistance 9. Vector Group: Dyn 11 10. Primary Connection : Delta 11. Nominal Voltage / Current : 12. Highest system Voltage: 12000V 13. Primary Frequency :50 HZ +/- 3% 14. Number of Phases : 3 15. Primary wires: 3 16. Secondary connection : Star 17. Secondary Volts / Current : 433V 18. Secondary phases : 3 19. Secondary wires: 4 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps) 21. Terminal arrangement. a.HV: HT terminal box as per the site condition. b. LV: Cable box suitable to receive suitable XLPE cable 22. LV: One separate terminal for earthing. 23. Total Losses at 50% Loading [Watts] [Max] --- as per IS 24. Total Losses at 100% Loading [Watts] [Max]--- as per IS 25.Percentage Impedance at 75 deg. C at ----- as per IS 26. No Load current: Less than 2% of full load current. 27. Standrad Fittings & Accessories. a. Rating and terminal marking plate : One b. Lifting Lugs : Two c. Off-circuit tap switch : One d. Earthing Terminals : Two e. Radiators ( Attachable): Adequate f. Explosion vent with Diaphragm : One g. Conservator with Drain plug: One h. Oil filling hole with cap : One i. Oil level indicator : One j. Dehydrating Silicagel Breather : One k. Terminal Arrangement : HV With Treminal Box l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Filter valve with blanking plate : One o. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : One r. Four :Unidirectional flat rollers s. One :10 cm dial thermometer (Rigid stem type)