Panchayat Raj Engineering Department Tender

Road work;Filling with gravel for shoulders with initial lead in layers by watering and ramming including cost and convayance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work ( APSS No 309 & 310 ) (For shoulders ).

Road work;Construction of plain cement concrete pavement,thickness as per design, over a prepared sub base,with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates (Natural sand 50% + Manufactured sand (Rock Sand) 50%) conforming to IS : 383, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing),spreading the concrete with sholvels, rakes,compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion and construction joints, applying primer, sealant,admixtures as approved, curing of concrete , and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including overhead charges & Contractors profit excluding Seignarage charges etc complete.

Road work;Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site,laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH using M/c 45-22.4 mm HBG of 30%, 22.40-2.36mm HBG metal of 40% and Crushed sand 2.36-75 micron of 30% excluding all over heads, Contractor's profit,seinorage charges GST