Panchayat Raj Engineering Department Tender

Road work;Sub-Estimate for Road Furniture -Providing and fixing of typical CRR informatory and Name Board with necessary Logo as per specifications and drawing. Three MS plates of 1.6mm thikc, tip and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate wil be we welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450 mm x 450mm x 600 mm, 600 mm below ground level. The top most diamond plate will be welded to middle plate by 47 mm x 47mm of 12 SWG sheet tube. All M.s. Will be stove enameled on both sides. Lettering and printing arrows, broder etc., will be pointed with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 MORD, including overhead charges & Contractors profit, but excluding Seignorage charges.

Road work;Providing, laying Reinforced cement concrete Hume pipes of 1200 mm Dia., NP4 class for pipe culverts including cost and conveyance of pipes etc., complete and labour charges for laying, jointing of 1000mm dia R.C.C Huma pipes in position including lifting, aligning, lowering and hoisting etc., as per drawing and as per MoRT&H Specifications 2900, 2905 (5th Revision) and IRC Special Publication No:13 and as directed by the Enginer-in-Charges for finished item of work.

Road work;Providing PCC M15 mix using 40mm, 20mm & 10mm size HBG crushed stone aggregate and fine aggregate(Natural sand 50%+Manufactured sand(Rock Sand)50% ) conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th Revision) and as directed by the Engineer-in-Charge for substructure.