Panchayat Raj Engineering Department Tender

Works;First Floor

Works;Ornamental plastering to ceiling 12mm thick in CM (1:3) with dubara sponge finish including cost and conveyance of all materias like cement, sand water etc., to site, including other taxes on all materials, all operational, incidental and labour charges such as mixing mortor, finishing, scaffolding, lift charges, including cutting of Grroves wherever necessary as directed by Engineer-in charge, curing, etc,. complete for finished item of work.(APSS 901 & 903)

Works;Supply and fixing of pre-cast RCC Ventilators of size (0.60*0.30)m including cost and conveyance and labour charges for fixing etc,. Complete.

Works;Providing and fixing of three shutter sliding windows made of Galvanized steel as per IS 513, D quality, galvanized as per IS 277 powder coated with pure polyester powder and thickness of 0.8mm for ouer frame and 0.58mm thickness for sliding shuttersection, with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the shutter / sash frame and facilitates with a waterdrain outlet component made of PVC and shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Alluminium 1 No. per each shutter and inclding installation of window system at site using anchor fasteners, silicon sealant applied at the outer frame corners inclusive of coveyance of all materials accessories, labour charges , and erection at site with complete finished item of work for ii) centre shutter sliding: centre shutter frame made of section of size 20mm * 47mm should be fitted with 5mm thick plain float glass of reputed make, The supporting guide section of size 15mm * 19mm of 0.58mm thick fixed horizentally at top and bottom of shutter frame and slides along the bottom and top guide tracks made of sections size 24mm * 20mm of 0.58mm thick and 29mm * 20mm of 0.58mmthick and iii) centre fly meshshutter sliding: section for fly mesh shutter frame should be of size 20mm * 40mm of 0.58mm thick and fitted with SS mesh (304 Grade). The supporting guide section of size 29mm * 20mm of 0.58mm thick at the bottom and 15mm * 19mm of 0.58mm thick at the top fixed horizentally to the Fly Mesh frame and slides along the bottom and top guide tracks made of sections size 20mm * 20mm of 0.58mm and 29mm * 20mm of 0.58mm.

Works;Supply and Fixing of Best teak wood Door fully pannlled door frame mafe of well seasoned medium teak scantlings of bottom reeper and shutter made of side rails, bottom rail and intermediate rails, panels, -4 No's are of 25mm thick as per approved design with fixtures of 9" 'Z' holdfasts, aldrop, butt hinges, Door stoppers, Tower bolts, handles with necessary screws complete as per specifications (APSS NO. 1001 & 1002). 1.50+2.25

Works;0.90+2.10 mtr

Works;Supply and Fixing of Sal Wood Door frame and Double shutter of size 1.05* 2.10mts including fixing of 6No's of M.S. Hold fasts, 6No.s of 125mm long Mild steel (PC) Butt Hinges, 2No's of 200mm long Alluminium Tower Bolts, 2No's of 150mm long Alluminium Door Handles, 1No of 300mm long Alluminium Aldrop and 1 No of Door Stopper including cost and conveyance of all materials and labour charges etc,. complete (1.05+2.10- mtr)

Works;2nd floor

Works;Masonry in Superstructure with CM (1:6) prop: using 2nd class traditional Bricks of size 23*11*7cm from approved quarry having minimum crushing strength of 50kg/cm2 including cost and conveyance of all materials like cement, sand, bricks, water etc,. To site, including materials, all operational , incident and labour charges such as mixing cement mortor, constructing masonry, scaffolding charges, lift charges, curing etc,. complete for finished item of work (APSS No. 501 & 504) (1st Floor)

Works;Providing imervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveynace charges of materials and including all operational, incidental and labour charges for mixing mortor, laying, rendering smooth and thread lining curing, rounding off junctions of wall and slab etc,. complete for finished item of work

Works;125mm thick roof slab:2nd slab

Works;Roof Beams: First Floor

Works;For Lintels: 1st Floor

Works;RCC M- 20 Nominal Mix (cement: fine agregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc,. to site and including seignorage charges including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc, cmplete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. (For Lintels)