Panchayat Raj Engineering Department Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
NADocument Cost
NATender Fee
NA
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
293136Bid Award Id
ViewTender No
65/RO/2021-22, Dated: 25.01.2022 of Regional Officer, PR, AdilabadTender Authority
Panchayat Raj Engineering Department ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Package IV;Supply and fixing of 6 nos of 20 mm dia bolts 500 mm long with nuts for jointing truss and vertical pipe.
21.6
-
2311
Package IV;Supplying,Fabrication & Fixing of Base plates 10 mm thick MS Plate with 16mm dia Nut and Bolts system and tieing over RCC Columns including the cost of conveyance of all materials & Labour charges
24
-
3088
Package IV;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Double C.P. Pillar cock
1
-
2116
Package IV;Supply, and fixing of approved make Vent cowl above the Soil & waste pipes for ventilation as required to avoid foul smell. 110mm
1
-
24
Package IV;Supply,fixing of 75 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings [Prince/Sudhakar or any ISI Brand] including cost and conveyance of all materials and labour charges etc., complete for finished item of work
2
-
98
Package IV;SANITARY FITTINGS:- Supply,fixing of 110 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings [Prince/Sudhakar or any ISI Brand] including cost and conveyance of all materials and labour charges etc., complete for finished item of work
1
-
87
Package IV;Supply,fixing of 110 mm deep PVC floor traps of self cleansing design with outlet size of 75mm diameter of approved make, including making connection with PVC soil/waste pipes using rubber gaskets and top shall be cover with removable CP strainer, etc., complete 110mm deep PVC floor traps(101.6)
1
-
180
Package IV;Prince/ Sudhakar make or equivalent quality PVC /SWR pipes & fittings ( as per ISI standards) 4kg/cm2 110mm dia. double socket
5
-
998
Package IV;Prince/ Sudhakar make or equivalent quality PVC /SWR pipes & fittings ( as per ISI standards) 4kg/cm2 75mm dia.(double socket)
5
-
526
Package IV;S&F premium make CPVC Pipes of Pipe -SDR 13.5 - 15.40 mm
5
-
812
Package IV;S&F premium make CPVC Pipes of Pipe -SDR 13.5 - 22.20 mm
5
-
932
Package IV;Supply & fixing RCC cover 1200mm dia with nminal reinforcement 3 " thick and hooks for lifting
1
-
933
Package IV;Manufacture, Supply and Delivery of R.C.C. Collars including transportation but excluding taxes & duties 1200 mm Dia
3
-
6459
Package IV;Sanitory and water supply Supplying & Fixing of Indian Pattern White Glazed 1st Quality of ISI Orissa Pan with "P" or "S" trap Hindware/Parryware/Neycer - ISI Mark 630x450 mm including cost and conveyance of all materials and labour charges etc., complete
1
-
2293
Package IV;Providing high yield strength deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, all taxes,and labour charges such as cutting, bending, placing in position, tying etc., and Countryes & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors.
1.35
-
114646
Package IV;Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including,Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls
435.94
-
48244
Package IV;Supply , manufacture, making to specified design andLabour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in position.
400
-
42264
Package IV;Supply and fixing of Iron doors of specific sizes including cost and conveyance of all structural steel and labour charges such as fabrication and fixing in position etc complete for finished item of work
170
-
17963
Package IV;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding Doors duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 45 mm x 2.20 mm with reinforcement of 1.2 mm thickness, super sash with overall size of 39 mm x 75 mm x 2.20 mm with for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. Door shall be provided with standard hardware & multi point locking system of bent handle espagulate .the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc. including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
1.44
-
9920
Package IV;Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, &15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ?C? channel of size 30 x 50mm forming stiles and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & railPaneling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip 20mm width is to be stuck on the interior side of the ?C? Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer?s specification & drawing for finished item of work.Door(0.75x2.10)
1.58
-
4102
Package IV;Providing skirting to internal walls to 15 cm height/risers of steps with Vetrified tiles 5-7 mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including c., complete for finished item of work, but excluding the cost of conveyance of all materials
4.16
-
3489
Package IV;Dadooing to walls with white glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including,and all taxes Cement as per GO MS 5 dt16.06.20 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707)
10.1
-
7038
Package IV;Flooring with Ceramic Tiles of 7.3mm thick 1st. quality of any shade as approved by Engineer - in - charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat grey cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, sales and other taxes on all materials, all operational, incidental, complete for finished item of work such as mixing of cement mortar, laying, curing, lift charges,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including,and all taxes Cement as per GO MS 5 dt16.06.20 etc., complete for finished item of work.(APSS No.701 & 707)
4.99
-
4073
Package IV;Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
93.66
-
77810
Package IV;Ornamental Plastering with CM (1:5), 12 mm thick finish including cost and conveyance of all materials like cement, sand, water etc., to site, Countryes & other taxes on all materials, all operational, incidental,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, all operational, incidental, and labor charges and labor charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc.excluding seigniorage charges, , complete for Even Surfaces of Wall for finished item of work (APSS 901& 903 ) of AP Revised data BLD -CSTN- 6-1
24.06
-
3389
Package IV;Plastering 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, etc., complete for for finished item of work. (APSS 1001,1003 & 1004) (CSSR) Internal Walls
411.88
-
68526
Package IV;Supplying and filling gravel in trenches ,sides of the foundations and basement with initial lead in layers not exceeding 15 cm thick consolidatiing each depposited layer by watering and rampping including cost and conveyance of water to work site and all operational incidental ,labour charges hire charges and T & O Complete for finished item APSS 309 &310) For Basement Hall
46.07
-
25672
Package IV;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labor charges, hire charges of T & P etc., complete,excluding seigniorage charges, for finished item of work. (APSS NO. 309 & 310)For Excavated Trenches
34.38
-
989
Package IV;Masonry work in CM (1:6) prop with Fly ash cement/ lime solid blocks withcompressive strength of 50 kg/sq.cm - IS:12894-1990 - CLASS - 5 290 x 150 x 140 mm TBSC-A.II-10 including cost and conveyance of all materials, labour charges, excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,and all taxes Cement as per GO MS 5 dt16.06.20 & other taxes on all materials, scaffolding and curing etc., complete with a compresive streangth not lessthan 50 kg/sqm for walls for Superstructure Walls.
29.34
-
191348
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) FOR SUNSHADE 0.60 M WIDE.
32.32
-
33012
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) for LINTELS
0.11
-
1285
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) For Tie Beams @ 7'0"/8'0"'
2.74
-
36582
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) Plinth beams
5.38
-
69773
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) Columns Upto Plinth Beam
4.78
-
59966
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403)- For Column Footings
5.63
-
54817
Package IV;Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to (1:5;10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes & other taxes on all materials, all operational, incidental,Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 and labor charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)
4.19
-
20762
Package IV;Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to (1:4;8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including Countryes & other taxes on all materials, all operational, incidental,including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 and labor charges, such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402) Footings (F1)
4.05
-
21125
Package IV;Construction of Mahila Bhavan at Sirsa GP of Kotapally Mandal of Mancherial Dist- Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labor charges etc., complete for finished item of work for Foundation of Building. (APSS No. 308)
50.2
-
17802
Package IV;Roofing with Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM Tensile Strength: 550 MPA.Paint coating: Regular Modified Polyester painting.Painting hickness (Top): 18 to 20 Microns,(Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length:Maximum 12 Meters with Regular Range Coloursfixed with G.I ?J? bolts & nuts 8 mm dia with bitumen & G.I limpet washers filled with white lead & including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (up to a pitch of 600) and eigniorage charges, etc., complete, excluding the cost of purlins, rafters, trusses & cost of conveyance of all materials
151.63
-
117137
Package IV;Supply and fixing of Mild Steel Tubes for Purlins including the cost of conveyance of all materials & Labour charges
1179.82
-
166295
Package IV;Supply and fixing of Mild Steel Tubes & Piped Truss of required diameters as per IS-1161 inclduing Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc excluding cost of fixing in position and including Labour charges for fixing heavy iron grills, Trusses, Stanchions, Heavy Beams and Girders erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and cranes etc., complete in position - Roof truss
525
-
73999
Package IV;Supply and fixing of 6 nos of 20 mm dia bolts 500 mm long with nuts for jointing truss and vertical pipe.
21.6
-
2311
Package IV;Supplying,Fabrication & Fixing of Base plates 10 mm thick MS Plate with 16mm dia Nut and Bolts system and tieing over RCC Columns including the cost of conveyance of all materials & Labour charges
24
-
3088
Package IV;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Double C.P. Pillar cock
1
-
2116
Package IV;Supply, and fixing of approved make Vent cowl above the Soil & waste pipes for ventilation as required to avoid foul smell. 110mm
1
-
24
Package IV;Supply,fixing of 75 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings [Prince/Sudhakar or any ISI Brand] including cost and conveyance of all materials and labour charges etc., complete for finished item of work
2
-
98
Package IV;SANITARY FITTINGS:- Supply,fixing of 110 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings [Prince/Sudhakar or any ISI Brand] including cost and conveyance of all materials and labour charges etc., complete for finished item of work
1
-
87
Package IV;Supply,fixing of 110 mm deep PVC floor traps of self cleansing design with outlet size of 75mm diameter of approved make, including making connection with PVC soil/waste pipes using rubber gaskets and top shall be cover with removable CP strainer, etc., complete 110mm deep PVC floor traps(101.6)
1
-
180
Package IV;Prince/ Sudhakar make or equivalent quality PVC /SWR pipes & fittings ( as per ISI standards) 4kg/cm2 110mm dia. double socket
5
-
998
Package IV;Prince/ Sudhakar make or equivalent quality PVC /SWR pipes & fittings ( as per ISI standards) 4kg/cm2 75mm dia.(double socket)
5
-
526
Package IV;S&F premium make CPVC Pipes of Pipe -SDR 13.5 - 15.40 mm
5
-
812
Package IV;S&F premium make CPVC Pipes of Pipe -SDR 13.5 - 22.20 mm
5
-
932
Package IV;Supply & fixing RCC cover 1200mm dia with nminal reinforcement 3 " thick and hooks for lifting
1
-
933
Package IV;Manufacture, Supply and Delivery of R.C.C. Collars including transportation but excluding taxes & duties 1200 mm Dia
4
-
8612
Package IV;Sanitory and water supply Supplying & Fixing of Indian Pattern White Glazed 1st Quality of ISI Orissa Pan with "P" or "S" trap Hindware/Parryware/Neycer - ISI Mark 630x450 mm including cost and conveyance of all materials and labour charges etc., complete
1
-
2293
Package IV;Providing high yield strength deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, all taxes,and labour charges such as cutting, bending, placing in position, tying etc., and Countryes & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors.
1.35
-
114646
Package IV;Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including,Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls
435.94
-
48244
Package IV;Supply , manufacture, making to specified design andLabour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in position.
400
-
42264
Package IV;Supply and fixing of Iron doors of specific sizes including cost and conveyance of all structural steel and labour charges such as fabrication and fixing in position etc complete for finished item of work
170
-
17963
Package IV;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding Doors duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 45 mm x 2.20 mm with reinforcement of 1.2 mm thickness, super sash with overall size of 39 mm x 75 mm x 2.20 mm with for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. Door shall be provided with standard hardware & multi point locking system of bent handle espagulate .the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc. including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
1.44
-
9920
Package IV;Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, &15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ?C? channel of size 30 x 50mm forming stiles and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & railPaneling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip 20mm width is to be stuck on the interior side of the ?C? Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer?s specification & drawing for finished item of work.Door(0.75x2.10)
1.58
-
4102
Package IV;Providing skirting to internal walls to 15 cm height/risers of steps with Vetrified tiles 5-7 mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including c., complete for finished item of work, but excluding the cost of conveyance of all materials
4.16
-
3474
Package IV;Dadooing to walls with white glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including,and all taxes Cement as per GO MS 5 dt16.06.20 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707)
10.1
-
6996
Package IV;Flooring with Ceramic Tiles of 7.3mm thick 1st. quality of any shade as approved by Engineer - in - charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat grey cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, sales and other taxes on all materials, all operational, incidental, complete for finished item of work such as mixing of cement mortar, laying, curing, lift charges,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including,and all taxes Cement as per GO MS 5 dt16.06.20 etc., complete for finished item of work.(APSS No.701 & 707)
4.99
-
4052
Package IV;Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
93.66
-
77414
Package IV;Ornamental Plastering with CM (1:5), 12 mm thick finish including cost and conveyance of all materials like cement, sand, water etc., to site, Countryes & other taxes on all materials, all operational, incidental,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, all operational, incidental, and labor charges and labor charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc.excluding seigniorage charges, , complete for Even Surfaces of Wall for finished item of work (APSS 901& 903 ) of AP Revised data BLD -CSTN- 6-1
24.06
-
3259
Package IV;Plastering 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, etc., complete for for finished item of work. (APSS 1001,1003 & 1004) (CSSR) Internal Walls
411.88
-
66302
Package IV;Supplying and filling gravel in trenches ,sides of the foundations and basement with initial lead in layers not exceeding 15 cm thick consolidatiing each depposited layer by watering and rampping including cost and conveyance of water to work site and all operational incidental ,labour charges hire charges and T & O Complete for finished item APSS 309 &310) For Basement Hall
46.07
-
25672
Package IV;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labor charges, hire charges of T & P etc., complete,excluding seigniorage charges, for finished item of work. (APSS NO. 309 & 310)For Excavated Trenches
34.38
-
989
Package IV;Masonry work in CM (1:6) prop with Fly ash cement/ lime solid blocks withcompressive strength of 50 kg/sq.cm - IS:12894-1990 - CLASS - 5 290 x 150 x 140 mm TBSC-A.II-10 including cost and conveyance of all materials, labour charges, excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,and all taxes Cement as per GO MS 5 dt16.06.20 & other taxes on all materials, scaffolding and curing etc., complete with a compresive streangth not lessthan 50 kg/sqm for walls for Superstructure Walls.
29.34
-
190887
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) FOR SUNSHADE 0.60 M WIDE.
32.32
-
32847
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) for LINTELS
0.11
-
1271
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) For Tie Beams @ 7'0"/8'0"'
2.74
-
36208
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) Plinth beams
5.38
-
69040
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) Columns Upto Plinth Beam
4.78
-
59315
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) - For Column Footings
5.63
-
54051
Package IV;Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to (1:5;10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes & other taxes on all materials, all operational, incidental,Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 and labor charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)
4.19
-
20192
Package IV;Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to (1:4;8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including Countryes & other taxes on all materials, all operational, incidental,including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 and labor charges, such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402) Footings (F1)
4.05
-
20568
Package IV;Construction of Mahila Bhavan at Kondampet GP of Kotapally Mandal of Mancherial Dist- Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labor charges etc., complete for finished item of work for Foundation of Building. (APSS No. 308)
50.2
-
17802
Package IV;Roofing with Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM Tensile Strength: 550 MPA.Paint coating: Regular Modified Polyester painting.Painting hickness (Top): 18 to 20 Microns,(Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length:Maximum 12 Meters with Regular Range Coloursfixed with G.I ?J? bolts & nuts 8 mm dia with bitumen & G.I limpet washers filled with white lead & including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (up to a pitch of 600) and eigniorage charges, etc., complete, excluding the cost of purlins, rafters, trusses & cost of conveyance of all materials
151.63
-
117137
Package IV;Supply and fixing of Mild Steel Tubes for Purlins including the cost of conveyance of all materials & Labour charges
1179.82
-
166295
Package IV;Supply and fixing of Mild Steel Tubes & Piped Truss of required diameters as per IS-1161 inclduing Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc excluding cost of fixing in position and including Labour charges for fixing heavy iron grills, Trusses, Stanchions, Heavy Beams and Girders erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and cranes etc., complete in position - Roof truss
525
-
73999
Package IV;Supply and fixing of 6 nos of 20 mm dia bolts 500 mm long with nuts for jointing truss and vertical pipe.
21.6
-
2311
Package IV;Supplying,Fabrication & Fixing of Base plates 10 mm thick MS Plate with 16mm dia Nut and Bolts system and tieing over RCC Columns including the cost of conveyance of all materials & Labour charges
24
-
3088
Package IV;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Double C.P. Pillar cock
1
-
2116
Package IV;Supply, and fixing of approved make Vent cowl above the Soil & waste pipes for ventilation as required to avoid foul smell. 110mm
1
-
24
Package IV;Supply,fixing of 75 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings [Prince/Sudhakar or any ISI Brand] including cost and conveyance of all materials and labour charges etc., complete for finished item of work
2
-
98
Package IV;SANITARY FITTINGS:- Supply,fixing of 110 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings [Prince/Sudhakar or any ISI Brand] including cost and conveyance of all materials and labour charges etc., complete for finished item of work
1
-
87
Package IV;Supply,fixing of 110 mm deep PVC floor traps of self cleansing design with outlet size of 75mm diameter of approved make, including making connection with PVC soil/waste pipes using rubber gaskets and top shall be cover with removable CP strainer, etc., complete 110mm deep PVC floor traps(101.6)
1
-
180
Package IV;Prince/ Sudhakar make or equivalent quality PVC /SWR pipes & fittings ( as per ISI standards) 4kg/cm2 110mm dia. double socket
5
-
998
Package IV;Prince/ Sudhakar make or equivalent quality PVC /SWR pipes & fittings ( as per ISI standards) 4kg/cm2 75mm dia.(double socket)
5
-
526
Package IV;S&F premium make CPVC Pipes of Pipe -SDR 13.5 - 15.40 mm
5
-
812
Package IV;S&F premium make CPVC Pipes of Pipe -SDR 13.5 - 22.20 mm
5
-
932
Package IV;Supply & fixing RCC cover 1200mm dia with nminal reinforcement 3 " thick and hooks for lifting
-
-
-
Package IV;Manufacture, Supply and Delivery of R.C.C. Collars including transportation but excluding taxes & duties 1200 mm Dia
-
-
-
Package IV;Sanitory and water supply Supplying & Fixing of Indian Pattern White Glazed 1st Quality of ISI Orissa Pan with "P" or "S" trap Hindware/Parryware/Neycer - ISI Mark 630x450 mm including cost and conveyance of all materials and labour charges etc., complete
1
-
2293
Package IV;Providing high yield strength deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, all taxes,and labour charges such as cutting, bending, placing in position, tying etc., and Countryes & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors.
1.35
-
114646
Package IV;Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including,Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls
435.94
-
48244
Package IV;Supply , manufacture, making to specified design andLabour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in position.
400
-
42264
Package IV;Supply and fixing of Iron doors of specific sizes including cost and conveyance of all structural steel and labour charges such as fabrication and fixing in position etc complete for finished item of work
170
-
17963
Package IV;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding Doors duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 45 mm x 2.20 mm with reinforcement of 1.2 mm thickness, super sash with overall size of 39 mm x 75 mm x 2.20 mm with for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. Door shall be provided with standard hardware & multi point locking system of bent handle espagulate .the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc. including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
1.44
-
9920
Package IV;Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, &15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ?C? channel of size 30 x 50mm forming stiles and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & railPaneling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip 20mm width is to be stuck on the interior side of the ?C? Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer?s specification & drawing for finished item of work.Door(0.75x2.10)
1.58
-
4102
Package IV;Providing skirting to internal walls to 15 cm height/risers of steps with Vetrified tiles 5-7 mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including c., complete for finished item of work, but excluding the cost of conveyance of all materials
4.16
-
3495
Package IV;Dadooing to walls with white glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including,and all taxes Cement as per GO MS 5 dt16.06.20 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707)
10.1
-
7053
Package IV;Flooring with Ceramic Tiles of 7.3mm thick 1st. quality of any shade as approved by Engineer - in - charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat grey cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, sales and other taxes on all materials, all operational, incidental, complete for finished item of work such as mixing of cement mortar, laying, curing, lift charges,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including,and all taxes Cement as per GO MS 5 dt16.06.20 etc., complete for finished item of work.(APSS No.701 & 707)
4.99
-
4080
Package IV;Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
93.66
-
77956
Package IV;Ornamental Plastering with CM (1:5), 12 mm thick finish including cost and conveyance of all materials like cement, sand, water etc., to site, Countryes & other taxes on all materials, all operational, incidental,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, all operational, incidental, and labor charges and labor charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc.excluding seigniorage charges, , complete for Even Surfaces of Wall for finished item of work (APSS 901& 903 ) of AP Revised data BLD -CSTN- 6-1
24.06
-
3437
Package IV;Plastering 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, etc., complete for for finished item of work. (APSS 1001,1003 & 1004) (CSSR) Internal Walls
411.88
-
69349
Package IV;Supplying and filling gravel in trenches ,sides of the foundations and basement with initial lead in layers not exceeding 15 cm thick consolidatiing each depposited layer by watering and rampping including cost and conveyance of water to work site and all operational incidental ,labour charges hire charges and T & O Complete for finished item APSS 309 &310) For Basement Hall
46.07
-
25672
Package IV;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labor charges, hire charges of T & P etc., complete,excluding seigniorage charges, for finished item of work. (APSS NO. 309 & 310)For Excavated Trenches
34.38
-
989
Package IV;Masonry work in CM (1:6) prop with Fly ash cement/ lime solid blocks withcompressive strength of 50 kg/sq.cm - IS:12894-1990 - CLASS - 5 290 x 150 x 140 mm TBSC-A.II-10 including cost and conveyance of all materials, labour charges, excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,and all taxes Cement as per GO MS 5 dt16.06.20 & other taxes on all materials, scaffolding and curing etc., complete with a compresive streangth not lessthan 50 kg/sqm for walls for Superstructure Walls.
29.34
-
191977
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) FOR SUNSHADE 0.60 M WIDE.
32.32
-
33184
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) for LINTELS
0.11
-
1298
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) For Tie Beams @ 7'0"/8'0"'
2.74
-
36972
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) Plinth beams
5.38
-
70537
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) Columns Upto Plinth Beam
4.78
-
60645
Package IV;Vibrated reinforced cement concrete corresponding M15 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20& other taxes on all materials, Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403)- For Column Footings
5.63
-
55617
Package IV;Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to (1:5;10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including, Countryes & other taxes on all materials, all operational, incidental,Including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 and labor charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)
4.19
-
21358
Package IV;Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to (1:4;8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site,excluding seignarage charges as per the message no 03/RD/TA/2020dt 13.02.20 of Technical adviser RD TS ,Including Countryes & other taxes on all materials, all operational, incidental,including GST on steel,and all taxes Cement as per GO MS 5 dt16.06.20 and labor charges, such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402) Footings (F1)
4.05
-
21707
Package IV;Construction of Mahila Bhavan at Jangaon GP of Kotapally Mandal of Mancherial Dist- Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labor charges etc., complete for finished item of work for Foundation of Building. (APSS No. 308)
50.2
-
17802
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements