Panchayat Raj Engineering Department Tender

Works;Ornamental plastering to ceiling 12mm thick with dubara sponge finish including cost and conveyance of all materials like cement, sand water etc., to site on all materials all operational incidential and labour charges such as mixinf mortor scaffolding charges lift charges etc., complete for finished otem of work.

Works;Plastering 12mm thick double coat in CM (1:5) 8mm thick base coat and top coat CM(1:3) of 4mm thick with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, curing, etc., complete for uneven surgaces of brick wall for finished item of work. (APSS 901,903 & 904) Internal Plastering ( GF)

Works;Plastering 12mm thick double coat in CM (1:5) 8mm thick base coat and top coat CM(1:3) of 4mm thick with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, curing, etc., complete for uneven surgaces of brick wall for finished item of work. (APSS 901,903 & 904) Internal Plastering ( FF)

Works;Plastering 12mm thick double coat in CM (1:5) 8mm thick base coat and top coat CM(1:3) of 4mm thick with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, curing, etc., complete for uneven surgaces of brick wall for finished item of work. (APSS 901,903 & 904) Internal Plastering ( FF)

Works;Plastering 12mm thick double coat in CM (1:5) 8mm thick base coat and top coat CM(1:3) of 4mm thick with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, curing, etc., complete for uneven surgaces of brick wall for finished item of work. (APSS 901,903 & 904) External Plastering ( GF)

Works;Plastering 12mm thick double coat in CM (1:5) 8mm thick base coat and top coat CM(1:3) of 4mm thick with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, curing, etc., complete for uneven surgaces of brick wall for finished item of work. (APSS 901,903 & 904) External Plastering ( FF)

Works;Plastering 12mm thick double coat in CM (1:5) 8mm thick base coat and top coat CM(1:3) of 4mm thick with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, curing, etc., complete for uneven surgaces of brick wall for finished item of work. (APSS 901,903 & 904) External Plastering ( SF)

Works;Gronolithie Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, sand and water etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials including overhead charges & Contractors profit etc but excluding GST, Seigniorage charges complete.for finished item of work

Works;Flooring with 25mm thick polished stones set over a base coat of CM (1:8) over CC bed with 100mmthick already laid only after properly cured cleaned moistured and where necessary treated with neat cement slurry and jointed with cement paste to full depth including cost of all materials like cement sand water and tiles etc., complete including seigniorage charges etc., complete for finished item of work(APSS No. 703 & 701)

Works;Providing skirting to internal walls to 15 cm height/risers of steps with polished shabad stone length equal to to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with igment of matching shade to full depth, including cost of all materials like marble slab, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work

Works;Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mmMS Angle and middle guide rail at site height with 65mmx8mmMS flat for the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work as per special spn 1105 Main Door D1-(4000mm x 2600mm)

Works;Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65mm and ISI marked flush door shutter of 30mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenolformaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-1) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of medium teak wood door frame, flush shutter, including suply and fixing 6 Nos. MS Z hold fasts of size 300mm x 40mm x 5mm including ISI marked MS powder coated fixtures 3 Nos. butt hinges (IS:205) of 150mm long, I No. aldrop (IS:2681) 250 mm long, No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. rubber bush including supplying and fixing 1.20mm thick PVC sheet to full height of the shutter inside including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002. (The vertical frame of door shall be embedded in flooring for deth of not less than 10mm) Door (D) -1200x2100

Works;Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65mm and ISI marked flush door shutter of 30mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenolformaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-1) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of medium teak wood door frame, flush shutter, including suply and fixing 6 Nos. MS Z hold fasts of size 300mm x 40mm x 5mm including ISI marked MS powder coated fixtures 3 Nos. butt hinges (IS:205) of 150mm long, I No. aldrop (IS:2681) 250 mm long, No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. rubber bush including supplying and fixing 1.20mm thick PVC sheet to full height of the shutter inside including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002. (The vertical frame of door shall be embedded in flooring for deth of not less than 10mm) Door (D) -1050x2100

Works;Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65mm and ISI marked flush door shutter of 30mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenolformaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-1) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of medium teak wood door frame, flush shutter, including suply and fixing 6 Nos. MS Z hold fasts of size 300mm x 40mm x 5mm including ISI marked MS powder coated fixtures 3 Nos. butt hinges (IS:205) of 150mm long, I No. aldrop (IS:2681) 250 mm long, No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. rubber bush including supplying and fixing 1.20mm thick PVC sheet to full height of the shutter inside including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002. (The vertical frame of door shall be embedded in flooring for deth of not less than 10mm) Door (D) -800x2100

Works;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track-2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) 13 of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 4 mm thick pinheaded glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be coextruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site including overheads and contractors profit etc.,complete for finished item of work complete for finished item of work.

Works;Providing mild steel flats and bars for fabricating steel work like window grills compound wall Gates, Iron Doors, Windows including cost of welding rods power charges including cost of fixing in osition as per approved designs and drawings including cost conveyance of bars from approved sources to site of work all operational incidental labor charges such as cutting bending placing in position etc.but excluding GST for finished item of work (APSS No.126) in all floors for Compound wall Gate.

Works;Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin). Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site, overheads and contractor profit etc.. complete for finished item of work.

Works;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Works;Supplying, fixing of 25mm dia 1.5mm thick PVC pipe (ISI Mark) concealed in wall with all 1 required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labor charges etc.complete.

Works;Wiring with 2 of 14/0.3mm (1.0 Sq.mm) P.V.C. insulated F.R. flexible copper cable (ISI MARK) in existing pipe with 6A switch control and 3/2 pin sockets fixing on separate board including all labour charges etc., complete.

Works;Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) and 1 of 22/0.3mm (1.5 Sqmm) F.R.L.S P.V.C. 4 insulated flexible copper cable of Makes: Finolex/RR kabel/Havells in existing pipe for mains inlcuding all labour charges etc., complete.

Works;Supply and run of 2 of 56/0.3mm (4 Sq.mm) and 1 of 26/03mm(2.50sqmm) F.R.L.S P.V.C. insulated flexible copper of Makes: Finolex / RR kabel / Havells in existing pipe for mains inlcuding all labour charges etc., complete.

Works;Supply and run of 6 Sq.mm) Supply of WPTC (Weather Proof Twin Core) ISI Alluminium Wire. 6 Makes: Polycab/GM/Million/V-Guard/Gold Medal / Kundancab/HPL/RPG/Nandicab / Nakoda/Payal/Finecab / Gemini / Vimal / Suncab/ Stanjo/Rajnigandha / Orbit / Airson.

Works;Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch hoard with earth continuity including wire leads, earth connections along with all labour charges etc.. complete.

Works;Supply and Transportation and fixing on wall/ ceiling of 1x36/40W box type tube light luminaire 8 with copper/VPIT Choke, condensor, starters etc., and INo 36/40W tube etc., complete with all standard accessories of makes Wipro/G.E./Phillips.

Works;Supply of 12/18 Modular Cover Frame.Makes: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus/Cabtree Amare/Logus Platina

Works;Providing independent earthing for Sophisticated Electronic equipment with 150mm x 200mm x 2.00mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 0.90mtr. length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including brick masonry M 1:3) Chamber of size 400m x 400m x 400mm covered with suitable cast iron Slab filling with salt and charcoal giving earth connection from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).

Works;Supply and fixing 12 Way SPN DB with IP 20 Protection as per IS:13032 and suitable for 10Nos S.P out goings and for 1 No Incommer etc complete of makes Legrand / Schneider. with IP-20 protection suitable for single phase 40A DP Isolator of make Legrand / Schneider. as incomer and 6- 11 32A 10KA TP MCB, C/D Curve ISI Mark of make Legrand / Schneider as out going including internal connection and labour charges for surface / flush mounting etc., complete. including cost and conveyance of all material, all labour charges, and contractor profit etc., complete but excluding GST.