Panchayat Raj Engineering Department Tender

Building;Providing, laying, spreading and compacting graded stone aggregate to Wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with Vibratory roller of 80 to 100kN to achieve the desired density including lighting, barricading and maintenance of diversion, etc as directed by the Engineer-in-Charge and as per Technical Specification Clause 406 MoRT&H ( 5th revision ), including overhead charges & Contractor profit excluding Seignarage charges etc complete.

Building;Construction of Granular sub-base by providing HBG material confirming to Grading - VI of MoRT&H (Table 400-1 & 400-2) including cost, and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix-in-place method with rotavator / approved means at OMC and compacting with vibratory roller to achieve CBR value minimum of 30% at 98% of dry density and PI value maximum 6, complete for finished item of work as per MoRT&H Specification 401 (5th revision) including contractors profit & Over head charges excluding Seignarage charges etc

Building;Supply of 18'' 450 mmWall mounting / Pedestal Air Circulators Makes : Crompton / Havells Turbo Force / Orient / Almonard / Panasonic / Halonix

Building;Supply and transportation and Fixing of of 20W +/-10%, >/ 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc complete with 5 years warranty with BIS Certification.LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / Panasonic / Halonix / HPL / Eveready / Surya / Keselec / Arraystorm / GM / Goldmedal / Goldwyn / Fortune Arrt / Lighting Technologies . LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs

Building;Supply and fixing 4 Way SPN DB with IP 20 Protection as per IS:13032 and suitable for 4Nos S.P out goings and for 1 No Incommer etc complete of makes Legrand / Schneider. with IP-20 protection suitable for single phase 40A DP Isolator of make Legrand / Schneider. as incomer and 6-32A 10KA TP MCB, C/D Curve ISI Mark of make Legrand / Schneider as out going including internal connection and labour charges for surface / flush mounting etc., complete. including cost and conveyance of all material, all labour charges, and contractor profit etc., complete but excluding VAT.

Building;Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on decolam sheet covered board including earth connection and all labour charges etc., complete on wall.

Building;Supply and fixing of Anchor / Gold Medal Olive / Million Zoom make ISI mark batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 9.0W LED Lamp (for new installation ) including cost and conveyance of all material and labour charges but excluding GST

Building;Supply and Run of 2 of 36/0.3mm (2.50 Sq.mm) FRLS / HFFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable of makes KEI / Polycab / Havells / GM / Million / HPL / Gold Medal / Power Flex / RPG / Anchor / Great White Sun Cab / Fortune Art. with Run 1 of 14/0.3mm(1.0Sqmm) FRLS / HFFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable of makes KEI / Polycab / Havells / GM / Million / HPL / Gold Medal / Power Flex / RPG / Anchor / Great White / Sun Cab / Fortune Art including cost and conveyance of all material and labour chages but excluding GST & other taxes.

Building;Wiring with run of 2 of 14/0.3mm (1.0 Sq.mm) FR / FRLS PVC insulated flexible ISI mark copper cable ( 100V grade as perIS:694/1990 ) of KEI / Polycab / Havells / GM / Million / HPL / Gold Medal / Power Flex / RPG / Anchor / Great White / Sun Cab / Fortune Art make in existing pipe with 6A 1 Way flush type Swich of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega, Ceiling rose 3 Plate of makes Anchor / Gold Medal Olive / Million Zoom. and Supply of Decolam Board of Size 8" x 10" as switch control box including cost and conveyance of all material and all labour charges but excluding other taxesetc., complete for light, bell, fan and exhaust fan points including cost and conveyance of all material and labour charges but excluding VAT.

Building;Supply and laying of 25mm dia 2.20 mm thick P.V.C.pipe ISI mark concealed in wall with PVC / Metallic junction boxes and all required accessories including masonary work for light, fan and separate plug point with supply and fixing of suitable size Metallic deep box including all labour charges etc., complete including masonary work, including cost and conveyance of all material, all labour charges, and contractor profit etc., complete but excluding GST

Building;Vaccum dewatering of freshly laid cement concrete floor using 100% air tight suction mat of suitable size and length,vaccum pump to maintain vaccum pressure 0.7-0.8 atmosphere as per the standard procedure,floating with power floater,vibrating using Screed vibrator, mechanical trowelling, finishing with sound edges and corners,including hire and operational charges of machinery ,labour,fuel etc,complete for finished item as directed by the -in-Charge.

Building;Supplying and Installation of Sports Flooring system of overall 80 mm thick (a+b+c) of which the top layer is of thickness (a) 22 mm and 53 to 92 mm wide reapers of varying length in tongue and groove shape, the edges of the boards with finger lock groove and the bottom side with air pass groove using natural 100% hardwood board drawn and sawn from one piece of solid wood Maple, Teak wood, Oak, etc., the under frame- made of pine wood runners of (b) 38 mm x 70 mm, treated with anti-termite solution and fixed on the bottom side with (c) 20 mm thick EPDM air cushioned pads, stapled through the two wings at 350 m x 350 mm c/c, including laying HDPE Plain Black Polythene Sheet, Tarpaulin Grade: GSM 150, Thickness: 100 Microns Sheeting on existing IPS / RCC subfloor treated with a vapor barrier to be placed on the levelled IPS / RCC sub floor before laying the under frame, the runners having air cushion pads to be placed on the vapor barrier in perfect level at 350mm in 1 direction, the surface board to be screwed to the runner through the tongue only and will lock the screwed tongue by the groove of adjoining board, ends of the boards to be locked by inserting the wooden fingers through the edgegrooves and fixed with suitable adhesive, an system of overall 80 mm thick (a+b+c) of which the top layer is of thickness (a) 22 mm and 53 to 92 mm wide reapers of varying length in tongue and groove shape, the edges of the boards with finger lock groove and the bottom side with air pass groove using natural 100% hardwood board drawn and sawn from one piece of solid wood Maple, Teak wood, Oak, etc., the under framemade of pine wood runners of (b) 38 mm x 70 mm, treated with anti-termite solution and fixed on the bottom side with (c) 20 mm thick EPDM air cushioned pads, stapled through the two wings at 350 m x 350 mm c/c, including laying HDPE Plain Black Polythene Sheet, Tarpaulin Grade: GSM 150, Thickness: 100 Microns Sheeting on existing IPS / RCC subfloor treated with a vapor barrier to be placed on the levelled IPS / RCC sub floor before laying the under frame, the runners having air cushion pads to be placed on the vapor barrier in perfect level at 350mm in 1 direction, the surface board to be screwed to the runner through the tongue only and will lock the screwed tongue by the groove of adjoining board, ends of the boards to be locked by inserting the wooden fingers through the edge

Building;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding doors with mesh shutter provision ? (2-glass shutters)-95 -Series duly manufactured usingUPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (108 mm x 45 mm)/(95.50 mmx 60 mm) x 2.20 mm for outer frames, (75 mm x39 mm)/(66 mm x42 mm) x 2.20 mm for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass ofreputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. Door shall be provided with standard hardware & multi point locking system of Patio/Bent espagulate .the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item ofwork. windows of size ( 0.9x1.2m)

Building;Plastering to brick masonary wall with 20mm thick double coat in CM (1:6) 16 mm thick base coat and CM (1:4) of 4mm thick top coat with dubara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding other taxes and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for outer Walls.

Building;Plastering to brick masonary wall with 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding other taxes and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for Internal Walls

Building;Roofing: - Roofing provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.

Building;Supply and fixing of Mild Steel Tubes & Piped Truss of required diameters as per IS-1161 inclduing Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc excluding cost of fixing in position and including Labour charges for fixing heavy iron grills, Trusses, Stanchions, Heavy Beams and Girders erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and cranes etc., complete in position

Building;Brick Masonry in superstructure with CM (1:8) prop: using Fly ASH Bricks of size 290x225x140mm with compressive of 50 Kgs / Sqcm from approved source including cost and conveyance of all materials like cement, sand, fly ash bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

Building;Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including soverhead charges & Contractors profit but exlcuding GST and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Building;Vibrated reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:2:4) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate ( Sand ) , coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Plinth beams

Building;Vibrated reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:2:4) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate ( Sand ) , coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Columns

Building;Vibrated reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:2:4) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate ( Sand ) , coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Pedastals

Building;Vibrated reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:2:4) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate ( Sand ) , coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Footings

Building;Filling with gravel (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and Cost and Conveyance of water to site and all operational, incidental, labour charges, , sales and other taxes etc, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Building;Plain Cement Concrete corresponding to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations (APSS No. 402)

Building;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Ordinary Soils-Mechcanical Means-3 m to 6 m depth