Panchayat Raj Engineering Department Tender

Works;Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch 3 board with earth continuity including wire leads, earth connections along with all labour charges etc., complete..and as per 2.1.4 of Sta revised data of BLD -ELEC-2.1.4

Works;Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings and as per 2.1.1 of Sta revised data of BLD -ELEC-2-1.1 Finolex / RR kabel / Havells / APAR EBXL / KEI(HFFR) / Polycab ((HR_FR-LF)/L&T/V-Guard (HFFR).

Works;Supply and Fixing of 25mm dia 2.00 mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete.

Works;Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anticapillary grove.

Works;Supplying and fixing of M.S tubes for trusses & purlins including fabrication cost of fixing, labour charges etc., complete

Works;Supply, manufacture, making to specified design andLabour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in position

Works;Painting to new iron / steel work with 2 coats of synthetic enamel paint of apporved brand and shade over a base coat of approved red oxide primer making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work incl OH&CP but excl GST

Works;Painting to new walls with 2 coats ofwith Snowcem paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work incl OH&CP but excl GST &Seign as per SS 912 for internal walls

Works;Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials

Works;Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigmentof size 600 x 600 mm and of 1st quality(598x598x8mm thich regular finish with normal colours), set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, fine sand(screened), water and tiles etc., complete, including OH&CP but excluding GST & seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. (APSS No.701 & 707)

Works;Plastering 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including c/c of all materials like cement, sand, water etc., to site, other taxes on all materials, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves, finishing, curing, etc., complete for for finished item of work incl OH&CP excluding GST &Seignorage charges. (APSS 1001,1003 & 1004) (CSSR) Internal Walls

Works;Brick masonry 230 mm thick for panel walls in superstructure with CM (1:8) proportion using II nd class country bricks of size 23x11x7cm from approved source having crushing strength not less than 35kg/sqcm including cost and conveyance of all materialslike cement, sand, bricks, water etc., to site, sales and other taxes on all materials and all operational, incidental and labour charges such as mixing cement mortar, curing scafolding charges, constructing masonary, lift charges, curing etc., complete for finished item of work incl OH&CP but excluding GST and seigniorage charges for superstructure (APDSS NO501 &504)

Works;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap- splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including OH&CP but excl GST & Seignorage charges, sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126)e

Works;Supply and placing of the VRCC M20 Nominal mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as, machine mixing, laying concrete, curing, including contractor profit and over head charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work. For Sun Shades

Works;Supply and placing of the VRCC M20 Nominal mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as, machine mixing, laying concrete, curing, including contractor profit and over head charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work. For Lintels

Works;Supply and placing of the VRCC M20 Nominal mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as, machine mixing, laying concrete, curing, including contractor profit and over head charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work. For Tie Beams

Works;Supply and placing of the VRCC M20 Nominal mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as, machine mixing, laying concrete, curing, including contractor profit and over head charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work. For Plinth Beams

Works;Supply and placing of the VRCC M20 Nominal mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as, machine mixing, laying concrete, curing, including contractor profit and over head charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work. For Columns

Works;Supply and placing of the VRCC M20 Nominal mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as, machine mixing, laying concrete, curing, including contractor profit and over head charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work. For Footings

Works;Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using hard granite stones from approved quarry including Cost and Conveyance of all materials like Granite stones, cement, sand, water, etc., to site including all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for foundation (APSS No. 601 & 615)

Works;Plain Cement Concrete (1:5:10) prop nominal mix (cement: fine aggregate: coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including Cost and Conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402) including overhead charges & Contractors profit etc but excluding GST, Seigniorage charges complete.for finished item of work

Works;Plain Cement Concrete (1:4:8) prop nominal mix (cement: fine aggregate: coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry (obtained by blasting) including Cost and Conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402) Flooring Bed

Works;Supply and filling of gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) including cost and conveyance of all material and labour charges,etc., complete. including overhead charges & Contractors profit etc but excluding GST, Seigniorage charges complete.for finished item of work

Works;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308) including cost and conveyance of all material and labour charges, and contractors profit & over heads but excluding seignorage charges and GST etc., complete, for Ordinary Soil-Manual Means-Upto 3 m depth.