Panchayat Raj Engineering Department Tender

Building;Supply and fixing of Ashirvad/Ajay/Astral Flowgaurd or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS(copper tube sizes 1/4" to 2") ashirwad flowgaurd SDR11 and SDR 13.5 pipes are made from identical CPVC components having the same physical properties for Hot and cold Water confirming to (IS 15778-2007) Supply and fixing of Ashirvad/Ajay/Astral Flowgaurd or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS(copper tube sizes 1/4" to 2") ashirwad flowgaurd SDR11 and SDR 13.5 pipes are made from identical CPVC components having the same physical properties for Hot and cold Water confirming to (IS 15778-2007) 28.60 mm ida pipes

Building;S&F of CP finissh brass body 32mmdia nominal size waste coupling with half/full thread brass check nut conforming to IS 2963:1979

Building;Constructing 457.2mm x 457.2mm (1'-6" x 1'-6'") brick in CM (1:6) prop. Masonry Inspection chamber upto 914.4mm (3'-0") and fitted with light weight 457.2mm x 457.2mm (1'-6" x 1"-6"] frame and cover of 20kg.. Including cost and convenyance of all materials to site, all labour charges, sales and otehr taxes on all materials etc., complete for finished item of work

Building;Supply anf Fixing of Orrisa Pan white glazed W.C 1st quality ISI Marked conforming to 15 2556 Part -3-2024 with p or S Trap Hindware/Parry Ware/Neycer ISI mark of size 580x440mm Rate as Per SSR Item No.TBSP-E-1-03

Building;Providing & Placing on Terra?? (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for Inlet & outlets and over flow pipes but withoutfittings & base support for tanks

Building;Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Building;Supply and Run of 2 of 2.50 Sqm WPSC Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains.

Building;Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Building;Supply of 1 Modular type Electronic step type fan regulator of GM Four-Five /Legrand Arteor/ Schneider Zen celo/MK Blenge.

Building;Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal Makes: MDS/L&T Hager/GE.

Building;Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.

Building;Supply and erecting ceiling fan with 3 blades and double ball bearings and with condenser A.C. 250 V 50 C/s of (48") 1200 mm sweep completely errected in position with Resistance type regular, canopy down rod upto 304.80 mm in length is provided with hook/clamps nuts and bolts and 24/0.2 flexible coper wire etc., complete and pointed with lettering by enamel paint the Sr. No. and date of errection, including cost and conveynace of all materials and labour charges etc., complete makes Crompton/Bajaj/Orient/Usha with 5 star rating

Building;Supply and fixing of batten holder/ slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation)

Building;Fixing of 40W tube light luminaire on wall/Ceiling with/TW round blocks with all accessories including giving connections and all labour charges

Building;Supply and Transportation of 1 x 40W Patty LED tube light luminaire with copper choke, starter etc., complete for including 1No 40W tube etc., complete.

Building;Supply and fixing of 6 A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc.,comp.

Building;Supply and fixing of 16A 3pin/6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on metal box covered board including earth connection and all labour charges etc., complete on wall. Makes: Gold

Building;Wiring with 2 x 1.00 sqmm (14/0.3mm) PVC insulated flexible copper cable in the existing metalic/non-metalic conduit pipe with 6 A flush type marked switch ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light bell and exhaust fan points in non-residential buildings except circuit mains as per Item No. 2.1.1

Building;Supply and Fixing of 25mm dia 1.80mm thick PVC conduit pipe of Sudhakar/Nandi or equivalent ISI make concealed in wall with all required accessories and No. 14 SWG GI wire for earth continuity including chiseling the wall wherever necessary including masonry work for run of mains including all labour charges etc., complete.

Building;Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work including Overheads and Contractors profitof work including Overheads and Contractors profit, but excluding the cost of conveyance of all materials.

Building;Supply and fixing of Salwood Door single shutter fully panelled door of size 0.75 x 2.10 M with frame made of well seasoned Sal Wood scantlings of size 100 x 75 mm and shutter made of side rails 100mm X 30mm, top rail 100 mm X30 mm, bottom rail 100mmX 30 mm and intermediate rails of 100mm x 30 mm and planks s- 4 no's of 25mm thick as per approved design with fixtures of 6 nos of 9"'z" holdfasts, 300 mm long MS Iron coted aldrop-1 no, 125mm long MS iron butt hinges 6 No's, Door stoppers-2 no, 150mm long MS coated Tower bolts 3- no's MS iron coated fancy handles 150 mm -2nos with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002)

Building;Supply and fixing of Salwood Door double shutter fully panelled door of size 1.05x 2.10 M with frame made of well seasoned Sal Wood scantlings of size 100 x 75 mm and shutter made of side rails 100mm X 30mm, top rail 100 mm X30 mm, bottom rail 100mmX 30 mm and intermediate rails of 100mm x 30 mm and planks s 5 no's of 25mm thick as per approved design with fixtures of 6 nos of 9"'z" holdfasts, 300 mm long MS Iron coted aldrop-1 no, 125mm long MS iron butt hinges 6 No's, Door stoppers-2 no, 150mm long MS coated Tower bolts 3- no's MS iron coated fancy handles 150 mm-2nos with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002)

Building;Supply and fixing of Salwood Door double shutter fully panelled door of size 1.50 x 2.40 M with frame made of well seasoned Sal Wood scantlings of size 100 x 150 mm and shutter made of side rails 100mm X 32mm, top rail 100 mm X32 mm, bottom rail 100mmX 32 mm and intermediate rails of 100mm x 32 mm and planks s- 5 no's of 25mm thick as per approved design with fixtures of 6 nos of 9" "z" holdfasts, 300 mm long MS Iron coted aldrop-1 no, 125mm long MS iron butt hinges 6 No's, Door stoppers-2 no, 150mm long MS coated Tower bolts 3- no's MS iron coated fancy handles 150 mm-2nos with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002)

Building;Flooring with ceramic tiles, set out, hududing heat center (18), 12 mm thick over CC bed already laid or RCC roof slab, including nest cement slurry spread @ 3.3.kgs per sqm & jointed neatly with white cement paste of honey like consistency to full depth mized with pigment of matching shade, including area allmplete cement, send water and thes pign complete, including seigniorage Chargenalete, complete for finished item of work, bot excluding the cost of conveyance of all materials.

Building;Dadooing to walls with white glazed tiles 1st quality of any size of brand as approved by Engineer-in-charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707) in All Floors

Building;Painting to New External Walls with two coats of Plastic Emulsion paint of Asian / Berger / Nerolac/Saicoat/Endocem or equalent quality of approved brand and shade as approved by the Engineer in Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls. (APSS No. 911) NOTE :: Standard data revised vide Chief Engineer, R&B (Buildings) Procs.No.CEB/TA8/AEE3/SSR: 2010-11 Dt: 21.01.2011. for external walls

Building;Painting to internal walls with water proof cement paint two (2) coats all colours and shade as approved by Engineer in charge over a base coat of a cement primer water base interior Grade-I of approved brand, makind three (3) coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for internal walls (SS 911)

Building;Plastering 20 mm thick in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, all materials, and labor charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer in charge, finishing, curing, etc.excluding seigniorage charges,, complete for Even Surfaces of Wall for finished item of work including Overheads and Contractors profit (APSS 901,903 & 904) For External walls

Building;Plastering 12 mm thick in two coats with base coat of 8 mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, all materials, and labor charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer in charge, finishing, curing, etc.excluding seigniorage charges,, complete for Even Surfaces of Wall for finished item of work including Overheads and Contractors profit (APSS 901,903 & 904) For External walls

Building;Brick masonry 230 mm thick for panel walls in superstructure with CM (1:6) proportion using II nd class country bricks of size 23x11x7 cm from approved source having crushing strength not less than 35kg/sqem including cost and of all materialslike cement,sand bricks, water etc., to site, including sales and other taxes on all materials and all operational incidental and labour charges such as mixing cement mortar, curing scafolding charges, constructing masonary, lift charges, curing etc., complete for finished item of work incl OH&CP but excluding vat and seigniorage charges for superstructure (APDSS NO501 &504)