Panchayat Raj Engineering Department Tender

Road work;Cutting transverse Contraction joints 3 to 4 mm wide and 1/3rd depth of concrete slab using concrete groove cutting machine with diamond studded saw within 24 - 48 hours of casting of CC pavement complete including subsequent widening of the groove 8 to 10 mm wide at top having depth of 15 mm as directed by Engineer - in - charge.

Road work;Engaging floter for surface finishing of the laid CC pavement including hire,fuel,labour charges etc.,complete.

Road work;Construction of dowel jointed un-reinforced, expansion and construction joint plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates (Natural sand 50%+Manufactured sand(Rock Sand)50% ) conforming to IS : 383, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion and construction joints, applying primer, sealant, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including overhead charges & Contractors profit excluding Seignarage charges etc complete.