Panchayat Raj Engineering Department Tender

Plain Cement Concrete of (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HG M/c (SS5) metal with concrete mixture including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, overhead charges & Contractors profit etc., complete but excluding GST & seigniorage charges, sales & other taxes on all materials,for finished item of work for Foundations (APSS No. 402).

Vibrated reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:1.5:3) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Foundations, Plinth, Pedestals (Below Plinth)

For Footings

For Pedastals

For Plinth Beams

Vibrated reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:1.5:3) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Columns, Lintels, Water Tanks, RCC Walls in Buildings

For Columns

For Lintels

For Sunshades 75mm at fixed end and 50mm at free end and 60cm wide

Vibrated reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:1.5:3) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For RCC Slabs, Beams

For Roof Beams

For GF Roof Slab of 125mm thickness

Supply and placing of the PCC M20 Nominal Mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard trap metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding VAT and seignorage charges for finished item of work for Bed Blocks

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Providing brick work of 230mm thick in CM (1:8) prop., using second class kiln burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular or traditional size , including cost & conveyance of all material and labour charges, centering & scafolding charges, and overhead charges & Contractors profit etc., complete as per APSS No.501 for Super structure and others but excluding GST and seignorage chages.

Plastering to brick masonary wall with 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding VAT and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for Internal Walls.

Plastering to brick masonary wall with 20mm thick double coat in CM (1:6) 16 mm thick base coat and CM (1:4) of 4mm thick top coat with dubara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding VAT and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for outer Walls.

Ceiling plastering of 12mm thick with CM (1:3) including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding VAT and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for CEILING PLASTERING.

B-53 Supply and fixing of Sal wood Door Double shutter fully pannlled door of size 1.50 x 2.10mt with frame made of well seasoned sal wood scantlings of size 125 x 75mm mm and shutterFlush door shutters, solid bond wood block board type with teak ply on both faces.: 35 mm thick conforming to IS:2202 as per approved design with fixtures of 6 nos of 9" ' z" holdfasts, 300 mm long aluminium aldrop-1 no,125mm long aluminium butt hinges 4 No's, Door stoppers-1 no, 150mm long Tower bolts - 1no's alumium, 200mm long Tower bolts - 1no's alumium,Aluminium fancy handles 150mm long 1no's, with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002)

B-53 Supply and fixing of Sal wood Door Double shutter fully pannlled door of size 0.90 x 2.10mt with frame made of well seasoned sal wood scantlings of size 125 x 75mm mm and shutterFlush door shutters, solid bond wood block board type with teak ply on both faces.: 35 mm thick conforming to IS:2202 as per approved design with fixtures of 6 nos of 9" ' z" holdfasts, 300 mm long aluminium aldrop-1 no,125mm long aluminium butt hinges 4 No's, Door stoppers-1 no, 150mm long Tower bolts - 1no's alumium, 200mm long Tower bolts - 1no's alumium,Aluminium fancy handles 150mm long 1no's, with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002)

B- 57 Supply and fixing of Window size 0.90 x 1.35 mt with sal wood frame of size 75x100mm along with shutters Flush door shutters, solid bond wood block board type with teak ply on both faces.: 25 mm thick conforming to IS:2202 and S/F of 4Nos. MS Hold fasts, 6Nos. MS tower bolts 100mm long. 6 Nos. MS Hinges 75mm long,2Nos MS Handles 3 Nos window stays. incl. all labour charges such as making window frame & shetter and fiXing 11 Nos. 16mm plain safety bars in to frame etc,

B- 57 Supply and fixing of Window size 1.50 x 1.35 mt with sal wood frame of size 75x100mm along with shutters Flush door shutters, solid bond wood block board type with teak ply on both faces.: 25 mm thick conforming to IS:2202 and S/F of 4Nos. MS Hold fasts, 6Nos. MS tower bolts 100mm long. 6 Nos. MS Hinges 75mm long,2Nos MS Handles 3 Nos window stays. incl. all labour charges such as making window frame & shetter and fiXing 11 Nos. 16mm plain safety bars in to frame etc,

White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including over heads & contractor profitcost and conveyance of all materials, and labour charges, incidental such as scaffolding, lift charges but excluding VAT etc., complete for finished item of work.

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) Steel Fe 500 /500D / 550D from prime producers like TATA, SAIL, VSP, Jindal & shyam steel etc. of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including soverhead charges & Contractors profit but exlcuding GST and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Total