Panchayat Raj Engineering Department Tender

Works;Supply and transportation of 22W, 2300 lumens, 1200mm length T5 LED light housing made with alluminium anodised body, wide operating voltage with PF=0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI=80 etc., complete.LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro /Crompton / Bajaj / Havells / Jaquar / Ib LED/ HPL / Syska / Surya /Keselec.LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs.

Works;Providing independent earthling for important equipment with 40 mm dia B clas 2.5 m long GI pipe and 19 mm dia B class GI pipe of 0.3 mt long connected with reducer providing GI funnel with mesh enclosed in CC chamber of 400 m x 400 m x 400 m with RCC slab cover duly providing staggered holes filling with salt and chrcoal from the bottom of the pipe giving earth connection from electrode through GI strip of 25x6x200 mm length with all accesories and labour charges complete as per IS specifications 732/1982

Works;Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.

Works;Supply and run of 1 of 14/0.3mm (1.0 Sq.mm)Finolex F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Works;Supply and fixing of 16A 3 pin and 6A 3 pin plug socket with indicator lamp and 16A fuse unit and 16A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Works;Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Works;Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm)FINOLEX brand Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Works;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2 ton 2 Ashirvad Flowguard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for Hot and Cold water (IS 15778:2007) (28.60 mm OD Pipe)

Works;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2 ton 2 Ashirvad Flowguard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for Hot and Cold water (IS 15778:2007) (15.90 mm OD Pipe)

Works;Providing & placing on Terrace polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and overflow pipes with all fittings including supply and fixing of 76.20mm dia PVC elbow 1st quality and 38.10mm dia PVC waste pipe outlet including coat and conveyance of all materials all labour charges etc. complete for finished item of work but excluding VAT.

Works;Supply and Transportation of 0.75 HP single phase ISI submersible motor pumpset

Works;Providing high yield strength deformed (HYSD) steel TMT bars (Fe 415 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including Cost and Conveyance of bars from approved sources to site of work with all taxes including Cost and Conveyance of binding wire, cover blocks chains, overlaps, spacess, dowels, wastage etc, and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors

Works;Painting walls with snowcem or other equal and approved water proof cement paint over priming coat 2 coats (All colours) including cost and conveyance of all materials and labour charges etc complete as per finished item of work

Works;Flooring with vertified tiles 1st quality 600x600 mm set over a base coat of CM (1:8) 12 mm thick over CC bed already laid or RCC roof slabs only includig neet slurry of honey like consistency spread @ 3.3 kg per sqm & jointed with white cement paste to full depth mixed with pigment of matching shade including cost of all materials and labour charges for dressing of flooring stones etc complete for finished of item of work (APSS No. 703 & 701)

Works;Roofing - Roofing will be provided with 0.5 mm thick galvanized / pre-painted GI profiled sheets fixed to the purlins with 14 size self-drilling screws with neoprene washer, side laps are stitched with self tapping/ drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove

Works;Supplying and fixing of MS tubes for trusses & purlins including fabrication cost of fixing, labour charges etc complete

Works;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 Track sliding windows with mesh shutter - (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42mmx25mm)/ (52mmx21.5mm) x 2.0 mm fitted with Vinyl coated fibre mesh - onrollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be coextruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work

Works;Supplying and fixing of 28/30 mm thick wood plastic composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fibre), and the remaining 15% additives, comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistane to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer-In-Charge

Works;Providing and fixing factory made solid wood polymer composite (WPC) single extruded Door Frame section of 100x65 mm with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32 MM/ 37 MM. The two vertical members are to be joined together with the horizontal member using 8x75 MM long MS star full thread screws to be used with reverse forward speed control hand drilling machine. The reasy/ assembled door frame is fixed to wall using Z hand fast 300 MM long hold fast

Works;Plastering 12 mm thick single coat in CM (1:4) including c/c of all materials like cement, sand water etc to site other taxes on all materials all operational, incidental and labour charges such as mixing mortar, as directed by Engineer-in-charge, finishing, curing, etc., complete for for finished item of work

Works;Masonry in superstructure with CM (1:6) prop: using 2nd class traditional Bricks of size 23x11x7cm from approved quarry having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials like cement, sand, bricks, water etc., to site, including materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

Works;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, centering, shuttering laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding cost of steel and its fabrication charges for finished item of work. (Lintels)

Works;Plain Cement concrete (1:5:10) using 40 mm metal with Concrete mixture. using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including , Countryes & all operational, incidental, and labor charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402) All