Panchayat Raj Engineering Department Tender

Works;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912

Works;Plastering 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for for finished item of work. (APSS 901,903 & 904)

Works;Ornamental plastering to ceiling 12mm thick in CM (1:3) with dubara sponge finish including Cost and Conveyance of all materials like cement, sand, water etc., to site, including other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, finishing, scaffolding, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, curing, etc., complete for finished item of work.(APSS 901& 903 )

Works;Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

Works;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter ? (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of Ti and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin)of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

Works;Providing and fixing 30mm thick FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat molded Prelam Pac ?C?channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 450 angle on either side forming stiles; and 5mm thick,95mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail 115mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be provided as gap insert for top and bottom rail. Paneling of 5mm thick both side Prelam Pac sheet to be fitted in the MS. Frame welded/ sealed to the stiles & rails with 7mm(5mm+2mm) thick X 15mm wide Pac sheet beading on inner side, and joined together with solvent cement adhesive etc. an additional 5mm thick Pac strip of 20mm width is to be stuck on the interior side of the ?C? channel using Pac solvent cement adhesive etc. complete as per direction of Engineer ? incharge, manufacture specification and drawing.

Works;Supply and fixing of Salwood door frame with 30mm thick flush door shutter including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage all fixture and labour charges etc., complete Size: 0.90 x 2.10 mts

Works;Supply and fixing of Salwood door frame with 30mm thick flush door shutter including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage all fixture and labour charges etc., complete Size: 1.20 x 2.10 mts

Works;Supply and fixing of medium teak wood Door fully pannlled door frame made of well seasoned medium teak Wood scantlings of bottom reeper and shutter made of side rails, bottom rail and intermediate rails , panels - 4 no's are of 25mm thick as per approved design with fixtures of 9" ' z" holdfasts, aldrop, butt hinges, Door stoppers, Tower bolts, handles with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002) Size : 1.20 x 2.10 mts

Works;Supply and filling of gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) including cost and conveyance of all material and labour charges,etc., complete.

Works;Masonry in superstructure with CM (1:6) prop: using 2nd class traditional Bricks of size 23x11x7cm from approved quarry having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials like cement, sand, bricks, water etc., to site, including materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

Works;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Works;RCC M- 20 Nominal mix (Cement:fine aggregate (50% Natural sand + 50% Rock sand): coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% Natural sand + 50% Rock sand) (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, centering, shuttering laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding cost of steel and its fabrication charges for finished item of work. For Roof Slab 125mm thick

Works;RCC M- 20 Nominal mix (Cement:fine aggregate (50% Natural sand + 50% Rock sand): coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% Natural sand + 50% Rock sand) (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, centering, shuttering laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding cost of steel and its fabrication charges for finished item of work. For Roof Beams

Works;RCC M- 20 Nominal mix (Cement:fine aggregate (50% Natural sand + 50% Rock sand): coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% Natural sand + 50% Rock sand) (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, centering, shuttering laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding cost of steel and its fabrication charges for finished item of work. For Sun Shades

Works;RCC M- 20 Nominal mix (Cement:fine aggregate (50% Natural sand + 50% Rock sand): coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% Natural sand + 50% Rock sand) (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, centering, shuttering laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding cost of steel and its fabrication charges for finished item of work. For Lintels

Works;RCC M- 20 Nominal mix (Cement:fine aggregate (50% Natural sand + 50% Rock sand): coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% Natural sand + 50% Rock sand) (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, centering, shuttering laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding cost of steel and its fabrication charges for finished item of work. For Coulmns

Works;RCC M- 20 Nominal mix (Cement:fine aggregate (50% Natural sand + 50% Rock sand): coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% Natural sand + 50% Rock sand) (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, centering, shuttering laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding cost of steel and its fabrication charges for finished item of work. For Plinth Beams

Works;RCC M- 20 Nominal mix (Cement:fine aggregate (50% Natural sand + 50% Rock sand): coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% Natural sand + 50% Rock sand) (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, centering, shuttering laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding cost of steel and its fabrication charges for finished item of work. For Pedestals

Works;RCC M- 20 Nominal mix (Cement:fine aggregate (50% Natural sand + 50% Rock sand): coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% Natural sand + 50% Rock sand) (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, centering, shuttering laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding cost of steel and its fabrication charges for finished item of work. For Footings

Works;Plain Cement Concrete (1:5:10) prop nominal mix (cement: fine aggregate (50% Natural sand + 50% Rock sand): coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including Cost and Conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)

Works;Plain Cement Concrete (1:4:8) prop nominal mix (cement: fine aggregate (50% Natural sand + 50% Rock sand): coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry (obtained by blasting) including Cost and Conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)

Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH