Panchayat Raj Engineering Department Tender

Community Hall;Filling avilaible earth (ordinary soil) in trenches, sides of foundations and basement complete finished item of work (APSS No 3098310 CSSR) Quantity of earth work

Community Hall;Filling with carted gravel in trenches, sides of foundations and basement oundations and basement complete finished item of work (APSS No 309&310 CSSR)

Community Hall;VRCC M-20 Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of is 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site, all incidental, operational and labour charges such as machine mixing, lifting (manual),laying concrete, vibrating, curing etc., complete and providing centering using steel centering plates etc., but excluding cost of steel and its fabrication charges for finished item of work. (APSS N00.403)Footing

Community Hall;VRCC M-20 Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of is 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site, all incidental, operational and labour charges such as machine mixing, lifting (manual),laying concrete, vibrating, curing etc., complete and providing centering using steel centering plates etc., but excluding cost of steel and its fabrication charges for finished item of work. (APSS N00.403)Pedestals

Community Hall;VRCC M-20 Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of is 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site, all incidental, operational and labour charges such as machine mixing, lifting (manual),laying concrete, vibrating, curing etc., complete and providing centering using steel centering plates etc., but excluding cost of steel and its fabrication charges for finished item of work. (APSS N00.403) Columns

Community Hall;VRCC M-20 Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of is 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site, all incidental, operational and labour charges such as machine mixing, lifting (manual),laying concrete, vibrating, curing etc., complete and providing centering using steel centering plates etc., but excluding cost of steel and its fabrication charges for finished item of work. (APSS N00.403) Plinth Beams

Community Hall;VRCC M-20 Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of is 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site, all incidental, operational and labour charges such as machine mixing, lifting (manual),laying concrete, vibrating, curing etc., complete and providing centering using steel centering plates etc., but excluding cost of steel and its fabrication charges for finished item of work. (APSS N00.403)Roof Beams

Community Hall;Slab 125mm Thick

Community Hall;RCC M 20 Nominal mix (Cement fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site such as machine mixing, laying concrete, curing etc .complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering.Lintel : Doors

Community Hall;Sunshades 75 mm thick at fixed and 50mm thick at free and

Community Hall;Providing high yield strength deformed (HYSD) steel TMT bars (Fe 415 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including Cost and Conveyance of bars from approved sources to site of work with all taxes complete for finished item of work (APSS No.126) in all floors

Community Hall;Providing 230mm thick brick masonary walls in superstructure with CM (1:6) prop (Cement Sand) using traditional second class bricks (23x11x7cm) from approved source including cost and conveyance of all materials like cement, sand, bricks, water etc, to site, and all incidental and operational, labour charges, like mixing cement mortor, scaffolding charges, constructing masonary, ift charges, curing etc., complete for finished item of work (APSS No. 504 & 501)

Community Hall;Brick Masonary walls of 11.5cm in CM(16) using Second class bricks having a crushing strength of not less than 35.00kg/cm2 including cost and seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing etc. complete but excluding the cost of steel and its fabrication charges for finished item of work as per SS 509

Community Hall;Plastering to superstructure 20 mm thick in two coats, with a base coat of 16mm thick in cm (1:6) prop. and top coat of 4 mm thick in cm (1:4) prop with sponze finishing, including making grooves, cost and conveyance of all materials to site, labour charges, scaffolding, lifting (manual) curing, all other incidental and operational charges etc., for finished item of work. ground floor (APSS o 9018904)

Community Hall;Ornamental plastering to ceiling 12mm thick with a base coat of 8 mm thick in cm (1:5) prop, and finish coat of 4mm thick in cm (1-3) prop with dubara sponge finishing, including cost and conveyance of all materials to site, labour charges, scaffolding, curing, all other incidental and operational charges etc., complete for finished item of work for second floor (APSS NO: 901 & 904)

Community Hall;Plastering to superstructure 12 mm thick in two coats, with a base coat of 8 mm thick in cm (1.6) prop. and top coat of 4 mm thick in cm (1:4) prop with sponze finishing, including making grooves, cost and conveyance of all materials to site. labour charges, scaffolding, lifting (manual) curing, all other incidental and operational charges etc, for finished item of work, ground floor (APSS No.9018904)

Community Hall;Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1.8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc. complete for finished item of work, but excluding the cost of conveyance of all materials.

Community Hall;External Door (Double shutter): 1.20 x 2.10 m: Supplying positioning and fixing 2 of ISI Mark, standard make flush door shutter of 35 mm thick, solid bond wood block board type with teak veneer on one face and commercial ply on another face including door frame made with sal wood/country wood scantlings of size 100 mm x 75 mm, including 6 nos. of ms 2 hold fasts of size 230x40x3 mm, 6nos, of 125 mm butt hinges, 2 nos, door stoppers, 4 nos. 150 mm long door handles, 2 nos aldrop of size 300 mm long. 3 nos. of 250 mm long tower bolts with bolts, nuts, nf screws including cost and conveyance of all materials to site, labour charges for making the frame and shutter and fixing etc., including minor extra fixtures required if any as directed by the engineer-in-chrge of the work complete for finished item of work. (all fittings and fixtures should be of stainless steel ISI Mark, got approved by the Engineer-in-charge) (APSSNO:1001&1002).

Community Hall;Internal Door: Supply and fixing of 35 mm thick flush door shutter, solid bond wood block board type with commercial ply on both faces including supply positioning and fixing door frame made with sal wood/country wood scantlings of size 100 mm x 75 mm, including 6 nos. of ms hold fasts of size 250x50x8 mm, 4 nos of 125 mm butt hinges, 1 no. door stoper, 2 nos. 150 mm long door handles, 1 no. aldrop of size 250 mm long, 2 nos of 200 mm long tower bolts with bolts, nuts, of screws including cost and conveyance of all materials to site, labour charges for making the frame and shutter and fixing etc.. including minor extra fixtures required if any as directed by the Engineer-in-chrge of the work complete for finished item of work. (all fittings and fixtures should be of stainless steel ISI Mark, got approved by the Engineer-in-charge) (APSS No: 1001&1002).

Community Hall;Windows: Supply and fixing windows with seasoned sal wood frame and mullion of size 100mmx75mm, shutter scantling with medium teak wood of size 75mm x 35mm, supplying and fixing of 5mm thick pin headed glass using medium teak wood beeding of size 12x12 mm, including supplying and fixing of 4 nos of 250x50x8 mm ms hold fasts with 3 nos. of 75 mm long butt hinges, 1 no. of 100 mm long handle, 2 nos. of 100 mm long tower bolts and 1 no. of 200 mm long flat latch, per each shutter including extra fixtures required if any, cost and conveyance of bolts, Nuts, NF screws, all other materials to site, labour charges, minor extra fixtures required if any as directed by the engineer-in-chrge of the work etc., complete for finished item of work. (all fittings and fixtures should be of stainlees steel ISI Mark, got approved by the Engineer-in-charge)

Community Hall;Ventilators (Fixed Glazing): Supply and fixing ventilaors with seasoned sal wood/country wood frame and mullion of size 100mmx75mm, fixing 3 nos. of 10 mm square bars horizontally to frame, making slanting grooves of 6 mm wide to the frame, supplying and fixing of 5mm thick 125 mm wide pin headed glass in the grooves, including supplying and fixing of 4 nos. of 250x50x8 mm MS hold fasts, cost and conveyance of bolts, Nuts, NF screws, all other materials to site, labour charges, minor extra fixtures required if any as directed by the engineer-in- chrge of the work etc., complete for finished item of work.

Community Hall;Painting to new walls with 3coats of plastic emulsion paint including one coat of cement primer of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for internal walls. (APSS No. 911)

Community Hall;Painting with Exterior Emulsion Paint of approved make (ACE from Asian Paint) and colour to the Exterior Faces of walls as directed 2 coats by diluting 1 lit of Emulsion Paint with a maximum 750 ml of water within an interval of not less than 6 hours between two coats over 1 coat of Exterior Wall Primer by diluting 1 Lit of primer with 1 Lit. of water (Total 3 coats) with surface preparation etc., as per standard specification including cost and conveyance of all materials, brushes, labour charges, curing, scaffolding and all other incidental and operational charges etc., complete for finished item of work in all floors. (APSS No 908)