Osmania University Tender

Providing BT Renewal coat from Univeristy College Arts and Social Sciences;Painting 2 coats with Ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound ) content less than 50 grams/ Lit. ( Asian / Berger / Nerolac / Indocem ) to Old Iron Work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges complete for finished item of work.

Providing BT Renewal coat from Univeristy College Arts and Social Sciences;Supplying and fixing of molded shanks Raised pavement Markers made of plastic body moulded from HIPS(HI-impact polystyrene) or ABS or ASA (Acrylic strene polystyrene) and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 1600 Kg tested in accordance to ASTM D 4280 type H and complying to specifications category A of MoRT&H circular no RW/NH/33023/10-97- DO III DT 11.06.1997 . The height, width and length shall not exceed 50mm,100mm and 100mm and with minimum reflective area of 13sqcm on each side and the slope to the base shall be 35 +/- 5 integrated cylindrical shanks,(of diameter not less than 19+/- 2mm and height not less than 30+/- 2mm) from the bosy is to be a minimum value of 700 Kgs. Fixing will be by drilling holes on the road for the twins shanks to go inside, without nails and using epoxy resin based adhesive as per manufactures recommendation and complete as directed by the engineer, etc., complete

Providing BT Renewal coat from Univeristy College Arts and Social Sciences;supplying of hot applied thermoplastic road marking compound 2.5mm thick including reflectorising Glass on Bituminous Surface at 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass bead as per IRC:35, the material should be of BERGER Company/BERGER Equivalent brand and must comply with the following ; a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab. In case the department approves the white index of any vendor, the department engineer may carryout random checking of the applied products at site against the approved panel.in case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compel the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional. (speed breakers, road center line and outer line).