Osmania University Tender

Providing certain essential repairs to P/5;Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including , sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., complete for finished item of work. External walls Ground floor

Providing certain essential repairs to P/5;Plain Cement Concrete (1:2:4) (M20) Grade Nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, including, sales & other taxes on all materials and including all charges for mixing, laying concrete in position, curing & lift charges etc., for finished item of work

Providing certain essential repairs to P/5;Supply & fixing RCC cover 22" dia with nominal reinforcement 3 " thick and hooks for lifting etc., complete for finished item of work.

Providing certain essential repairs to P/5;Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Engineer-in-charge duly taking actual premeasurements before dismantling including all labour charges etc., complete Brick masonry

Providing certain essential repairs to P/5;Dismantling doors, Windows & clear storey windows, ventilators etc., (wood or Steel) shutters including chowkhats, architraves, holdfasts and other attachments etc., complete & stacking them within 100 mt lead Not exceeding 3 sqm in area

Providing certain essential repairs to P/5;Supply and fixing DOOR as per drawings with Medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 35mm thick Single Shutter with solid bond block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with external lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter , supply and fixing 6 Nos MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including cost of ISI marked MS Powder Coated fixtures of 3 Nos Butt Hinges 125mm long, including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1000mmX2100mm) etc., complete.

Providing certain essential repairs to P/5;Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ?C? channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Paneling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ?C? Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer?s specification & drawing for finished item of work.

Providing certain essential repairs to P/5;Removing the existing damaged mesh from the windows duly removing the nails and supply and fixing new Stainless Steel Mosquito proof mesh of 20 guage to the existing old frame of windows including supply and fixing of 2" x 1/2" teak wood beading including cost and conveyance of all materails, labour charges, screws / nails including transporation etc., complete for finished item of work

Providing certain essential repairs to P/5;Labour charges for wrought and put up including fixing in position for Teak wood Flush type door shutter including frame etc., complete for finished item of work.

Providing certain essential repairs to P/5;Providing 110 mm Dia ISI marked PVC down water take pipes with socket 4kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, PVC Shoes PVC clamps and all other accessories and fixing in position including Cutting holes in Brick masonry & repairs including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site including etc., complete for finished item of work.

Providing certain essential repairs to P/5;Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and CP short bend and fixed using required size of nails and screws, 15mm PVC connections with brass union nuts CP coated and Brass body CP finish Bib Tap of not less than 300 grams weight with quarter turn spindle including cost and conveyance of all materials to site, etc., complete for finished item of work for all floors.

Providing certain essential repairs to P/5;S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931 etc., complete for finished item of work.

Providing certain essential repairs to P/5;S&F of 15 mm brass body CP finish two way bib tap of not less than 400 grams weight with quarter turn spindle internal/ external threaded connection conforming to IS 8931 etc., complete for finished item of work.

Providing certain essential repairs to P/5;Supply & Fixing 4" (101.6 mm ) Nahany Trap ( Without Jali with inlet)UPVC/SWR Pipe fittings etc., complete for finished item of work.

Providing certain essential repairs to P/5;S&F Stainless steel 4" dia round Grating with frame for nahany or floor trap cover with or without hole etc., complete for finished item of work.

Providing certain essential repairs to P/5;Supply & fixing 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality etc., complete for finished item of work.

Providing certain essential repairs to P/5;Cutting holes in Brick masonry &repairs Labour charges only etc., complete for finished item of work.

Providing certain essential repairs to P/5;S&F premium make CPVC Pipes of 28.60mm OD Pipe- SDR11 etc., complete for finished item of work.

Providing certain essential repairs to P/5;Supply of 25mm PPR Ball Valve conforming to DIN Standards 8077/8092 etc., complete for finished item of work.

Providing certain essential repairs to P/5;S&F premium make CPVC Pipes of 15.90mm OD Pipe- SDR 11 etc., complete for finished item of work.

Providing certain essential repairs to P/5;Removing 15mm nominal size G.I Pipe & fitting etc. complete. etc., complete for finished item of work.

Providing certain essential repairs to P/5;Removing the existing W.C s including labour charges etc complete etc., complete for finished item of work.

Providing certain essential repairs to P/5;Granolithic Concrete flooring 20 mm thick with (1: 1 1/2 : 3), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal sand and water including including Overheads & Contractors Profit etc., complete for finished item of work. for all Floors

Providing certain essential repairs to P/5;Painting 2 coats with Ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound ) content less than 50 grams/ Lit. ( Asian / Berger / Nerolac / Indocem ) to New Wood Work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges including etc., complete for finished item of work.