Osmania University Tender

Providing new 100 KVA, 11KV/430V copper wound;Supply of round bottom G.I sheet bucket of 9 Ltrs. Capacity as per IS:2546 made out of 24 gauge GI sheet with extra handle at bottom duly painted inside and red out side with printed with FIRE Mark for stand and hook and filled with sand along with floor mounting stand for keeping 4No of fire bucket 1500mm length, 900mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of enamel paint.

Providing new 100 KVA, 11KV/430V copper wound;Supply of First Aid box 18" x 12" x 8".

Providing new 100 KVA, 11KV/430V copper wound;Supply and fixing of ABC Powder type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure gas cartridge, discharge hose, wall mounting bracket / stand etc. complete, confirming to IS:15683 including transportation, all taxes and all labour charges etc complete. Makes : FIREX /MINIMAX/ ARMOUR /SAFEX/ KANNEX / CEASEFIRE

Providing new 100 KVA, 11KV/430V copper wound;Supply and fixing heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket suitable for 95 sq.mm 3.5C XLPE insulated armoured cable including cost and conveyance of all materails labour charges, etc., complete for finished item of work. Makes: SMI / Commet / Dowels

Providing new 100 KVA, 11KV/430V copper wound;Supply transportation, loading, unloading of 95 sq.mm 3.5C 1100v grade XLPE PVC insulated armoured LT UG Cable ISI marked of the following cable. Makes : Torrent / Universal / Unicab / Polycab / Havells / Gloster / KEI .

Providing new 100 KVA, 11KV/430V copper wound;Supply and Run of Zero gauge copper wire to connect transformer primary side from HG fuse set including cost of all accessories and labour charges etc., complete.

Providing new 100 KVA, 11KV/430V copper wound;Supply and Run of 40mm x 6mm copper strip including cost of all accessories and labour charges etc., complete.

Providing new 100 KVA, 11KV/430V copper wound;Supply and run of 25mm x 6mm thick G.I strip including cost of all accessories and labour charges. etc., complete.

Providing new 100 KVA, 11KV/430V copper wound;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC /Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).

Providing new 100 KVA, 11KV/430V copper wound;Providing independent earthing for T/F body/LAS/H.G fuse set/panel set/ panel box/Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through flange with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) and all labour charges etc complete.

Providing new 100 KVA, 11KV/430V copper wound;Supply and erection of Panel mounting 160A 4 Pole MCCB, 25KA with thermal magnetic setting release arrangement along with suitable SS enclosure, spreaders on both sides of MCCB and all connections etc., complete. Makes : Havells / HPL / Indo Asian.

Providing new 100 KVA, 11KV/430V copper wound;Supply, transportation, erection and commissioning of 100 KVA Copper Wound Transformer with all test reports. The Transformer shall be designed and manufactured as per IS:1180 OCTC with level - I with initial filling of oil as per IS:335-1993. The basic details of the Transformer are as under:- 1. Quantity : 1 2. Rated KVA : 100 3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed 7. Cooling : ONAN 8. Temp Rise : 40°C in oil, 45°C by resistance 9. Vector Group:Dyn 11 10. Primary Connection : Delta 11. Highest system Voltage: 12000V 12. Primary Frequency :50 HZ +/- 3% 13. Number of Phases : 3 14. Primary wires: 3 15. Secondary connection : Star 16. Secondary Volts / Current : 433V 17. Secondary phases : 3 18. Secondary wires: 4 19. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps). 20. Terminal arrangement. a.HV: HT terminal box as per the site condition. b. LV: Cable box suitable to receive XLPE cable 21. LV:One separate erminal for earthing. 22. Total Losses at 50% Loading [Watts] [Max] --- as per IS 23. Total Losses at 100% loading [Watts] [Max]--- as per IS 24.Percentage Impedance at 75 deg. C as per IS 25. No Load current: Less than 2% of full load current. 26. Standrad Fittings & Accessories. a. Rating and terminal marking plate: One b. Lifting Lugs:Two c. Off-circuit tap switch :One d. Earthing Terminals :Two e. Radiators ( Attachable): Adequate f. Explosion vent with Diaphragm :One g. Conservator with Drain plug:one h. Oil filling hole with cap :One i. Oil level indicator : One j. Dehydrating Silicagel Breather : One k. Terminal Arrangement: HV With Treminal Box l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Filter valve with blanking plate : One o. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : One r. Four :Unidirectional flat rollers s. One :10Cm dial thermometer(Rigid stem type). Makes: Thota / Power Tech or equivalent.

Providing new 100 KVA, 11KV/430V copper wound;Supply and erecting approved make 11KV, 5KA metal oxide lightning arrestors (3 Nos.) each of one set for RYB phases complete suitable for 11 KV supply with necessary materials on existing cross arm, clamp fabrication channels, bolts nuts and washers. etc., complete.

Providing new 100 KVA, 11KV/430V copper wound;Supply and stringing of 3 of 7/3.15 AAAC / Rabbit (55 Sq.mm) conductor for Overhead line with stringing, binding and suitable size of clamps for Jumpering etc., complete. Make : Pawancab or its equivalent.

Providing new 100 KVA, 11KV/430V copper wound;Supply ,Transportation ,loading, unloading and erection of 9.1mtr long PSCC poles with 280kg working load at site in good condition for H.T. / L.T. lines support including excavaton of pit (1.5 x 0.75 x 0.6) mtrs and concreating & coping with 1:2:4 prop not less than 0.57 cum from bottom of the pole upto ground level including cost and conveyance of all materials and labour charges etc., complete.

Providing new 100 KVA, 11KV/430V copper wound;Supply and fixing of back clamps / top clamps of suitable size i.e. 50mm x 50mm x 5mm thick with necessary angle iron for supporting to DP structure and pole top clamp and necessary bolts, nuts & washers etc., for holding channels on DP structure including cost and conveyance of all materials & labour charges etc., complete.

Providing new 100 KVA, 11KV/430V copper wound;Supply and fixing of 75mm x 40mm x 4.4mm thick MS C channel cross arm of 5' length fabricated for HT insulators mounting & erected on pole duly providing with necessary clamp of 50mm x 6mm MS flat with 15mm bolts nuts & washers with one coat of red oxide paint & two coats of silver paint including cost and covneyance of all materials and labour charges etc., complete.

Providing new 100 KVA, 11KV/430V copper wound;Supply , Fabrication, Transportation and fixing of Box type RS Joist pole made with 2 Nos 175X85 mm ( ISMB Modified ) or equivalent about 30'-0 length / 9.1 mtrs length poles welded together including excavation of pit, coil earthing, Special T&P, painting of Pole with 1 coat of Red oxide and 2 coats of alluminium paint, CC 1:3:6 upto ground and 1:2:4 for Couping work, 200A AB Switch, HG fuse sets, required angle iron channels, clamps, nuts and bolts, 11KV pin insulators, 2Nos GI pipe earthings as per the IS with brick massonry chamber including labour and transportation charges etc., complete.