Osmania University Tender

Providing certain essential works in Senate Hall;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding.The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

Providing certain essential works in Senate Hall;Painting 2 coats with Ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound ) content less than 50 grams/ Lit. ( Asian / Berger / Nerolac / Indocem ) to Old Wood Work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges including etc., complete for finished item of work.

Providing certain essential works in Senate Hall;Painting with synthetic polymer luxury Plastic Emulsion / solvent based lustre paint of superior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ Lit. ( Asian / Berger / Nerolac / Saicoat / Indocem) to Exterior / Interior faces of new walls in 2 coat of approved make shade and colour over primer coat with water based cement primer water based interior Gr-I ( Asian / Berger / Nerolac / Saicoat / Indocem ) MAKING 3 COATS including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., including etc., complete for finished item of work in all floors.

Providing certain essential works in Senate Hall;Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent including etc., complete for finished item of work

Providing certain essential works in Senate Hall;SECOND FLOOR

Providing certain essential works in Senate Hall;FIRST FLOOR

Providing certain essential works in Senate Hall;Providing impervious coat to exposed RCC Roof Slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including , sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab including etc., complete for finished item of work. GROUND FLOOR

Providing certain essential works in Senate Hall;SECOND FLOOR

Providing certain essential works in Senate Hall;FIRST FLOOR

Providing certain essential works in Senate Hall;RCM facia (50mm Finished thick) for Drop walls, Fins with Rabbit Wire Mesh & nominal reinforcement in CM(1:3) prop. of 25mm thick and 12 mm thick plastering in CM (1:5) & (1:3) prop. for 1st and 2nd coats respectively with dubara sponge finishing to all exposed faces, as directred by Engineer-In-Charge , including cost and conveyance of all materials to site, sales & othertaxes on all materials, operationals & incidental, cost and conveyance of cement, wire mesh, water to work site, centering, scaffolding and form work, lift charges etc., including etc., complete for finished item of work but excluding cost of steel and its fabrication charges for finished item of work GROUND FLOOR

Providing certain essential works in Senate Hall;Providing SCAFFOLD with staging using Casurina balli props and bracings supporting wooden brackets, wooden stage scaffold boards including hire charges for Casurina ballies, wooden baords, scaffolds etc., and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work.

Providing certain essential works in Senate Hall;Supplying, fitting and placing thermo Mechanically Treated (TMT) HYSD Fe- 500 / 500D / 550 D Steel as per IS 1786-1979 manufactured by Primary producers like TATA, SAIL, VSP, JSW, Jindal and Shyam Steel as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of etc., complete for finished item of work in all floors ( APSS No.126)

Providing certain essential works in Senate Hall;SECOND FLOOR

Providing certain essential works in Senate Hall;FIRST FLOOR

Providing certain essential works in Senate Hall;Plain Cement Concrete (1:2:4) (M20) Grade Nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, sales & other taxes on all materials and including all charges for mixing, laying concrete in position, curing & lift charges including etc., for finished item of work GROUND FLOOR

Providing certain essential works in Senate Hall;Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls

Providing certain essential works in Senate Hall;Providing and fixing in True Horizontal Level 14 mm - Mineral Fibre sheet 600 x 600 of Board / Tegular Edge tiles with a Humidity Resistance of 95% RH, Average NRC 0.50, Light Reflectance >85%, Thermal Conductivity ? = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1 Arm strong false ceiling system manufactured by M/s Arm strong world Industries using hot dipped Galvanized Steel section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at every 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire laying fine fissured butt edge ceiling tiles of 15 mm thick mineral fiber Board manufactured by M/s Arm Strong World Industries Ltd., having RH 99% and for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting, fixing of standing of frame work exposing roof making including etc., complete for finished item of work.