Osmania University Tender

Renovation of damaged steel structure;Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., complete for finished item of work. For Walls Plastering

Renovation of damaged steel structure;Reinforced Masonry for partition walls (100 mm thick) in CM (1:6) prop. (Cement : Screened sand) using Flyash lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50Kg/Sq.cm and using two mild steel bars of 6mm dia. in every third layer of brick masonry , with free joints of main brick work including cost and seigniorage charges and conveyance of all matyerials and water from approved sources to work site and all operational and incidental , labour charges such as scaffolding , mixing mortar , constructing masonry , lift charges, curing etc. complete but excluding cost of steel and its fabrication charges etc., complete for finished item of work. Ground Floor.

Renovation of damaged steel structure;Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Engineer-in-charge duly taking actual premeasurements before dismantling including all labour charges including etc., complete. Brick masonry

Renovation of damaged steel structure;Making holes up to 18mm Diameter in RCC/ any stones up to 50 mm thick / Pressure grouting the drilled holes with neat cement slurry or with approved grout admixture using pump - excluding cost of drilling holes after fixing nozzles as technical specification approved by the department.

Renovation of damaged steel structure;Supplying, fitting and placing thermo Mechanically Treated (TMT) HYSD Fe- 500 / 500D / 550 D Steel as per IS 1786-1979 manufactured by Primary producers like TATA, SAIL, VSP, JSW, Jindal and Shyam Steel as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of etc., complete for finished item of work in all floors

Renovation of damaged steel structure;RCC M- 20 Nominal mix (Cement:fineaggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size gradedmachine crushed hard granite metal (coarseaggregate) from approved quarry includingcost and conveyance of all materials likecement, fine aggregate (sand) coarseaggregate, water etc., to site and includingSeigniorage charges, sales & other taxes onall materials including all operational,incidental and labour charges such asmachine mixing, laying concrete, curingetc.,complete but excluding cost of steel andits fabrication charges for finished item of work including centering and shuttering charges including cost and conveyance of all materials and labour charges etc., complete for finished item of work. Columns

Renovation of damaged steel structure;Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Engineer-in-charge duly taking actual premeasurements before dismantling all labour charges Reinforced including etc.,complete finished item of work.

Renovation of damaged steel structure;Supplying and fixing of G.I Anchor Bolt of 1'-0 depth for fixing MS plate etc.,including labour charges for finished item of work.

Renovation of damaged steel structure;Supplying and fixing of MS plate of Heavy weight of 12 mm thick of size 1'-0 x 1'-0 etc., fixing to the pillar including cutting, welding and labour charges for finished item of work.

Renovation of damaged steel structure;Supplying and fixing Mild Steel 40 mm dia nominal bore 3.65 mm thick (OD 48.40) Medium Grade properties & weight as per IS 1239 (Part I) - 1979 mark MS Tube for fixing of GI Sheet including cost and conveyance of all materials to work site and all operational, incidental, labour charges, including etc., complete for finished item of work.

Renovation of damaged steel structure;Supplying and fixing Mild Steel 50mm dia nominal bore 3.65 mm thick (OD 60.30) Medium Grade properties & weight as per IS 1239 (Part I) - 1979 mark MS Tube for fixing of GI Sheet including cost and conveyance of all materials to work site and all operational, incidental, labour charges, including etc., complete for finished item of work.